Aerodynamic Performance of an Airfoil with Step-Induced Vortex for Lift Augmentation
Publication: Journal of Aerospace Engineering
Volume 11, Issue 1
Abstract
Physical and numerical experiments on flow developments around an NACA-0012 airfoil were conducted to explore the possibility of enhancing the airfoil's aerodynamic performance by vortex lift augmentation. The paper focuses on the effects of the separated flow and subsequent vortex formation, generated by backward-facing steps on pressure distributions and corresponding flow occurrences around the airfoil. Various step configurations are examined to determine their effect on lift and on lift-to-drag ratios. A discussion of the effects of main geometrical parameters of upper and lower surface steps on the airfoil performance, based on computational and physical flow visualization experiments, are presented. The results suggest that incorporation of backward-facing steps on the lower surface that are located at the midchord and extend back to the trailing edge with 50 depth of the airfoil chord may lead to considerable enhancements in lift coefficients and lift-to-drag ratios. The data produced may serve as a reference for future studies on the possible use of separated vortex structures in enhancing the aerodynamic or hydrodynamic performance of vehicles and structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abbot, I. H., and Von Doenhoff, A. E. (1959). Theory of wing sections including a summary of airfoil data. Dover Publications, Inc., New York, N.Y.
2.
Austin, F. R., Nostrand, M. J., Knowles, W., Gareth, V., and Jameson, A.(1994). “Static shape control for adaptive wings.”AIAA J., 32(9), 1895–1901.
3.
Dulikravich, G. S.(1992). “Aerodynamic shape design and optimization: Status and trends.”J. Aircraft, 29(6), 1020–1026.
4.
Fertis, D. G.(1994). “New airfoil design concept with improved aerodynamic characteristics.”J. Aerosp. Engrg., ASCE, 7(3), 328–339.
5.
Gad-el-Hak, M.(1990). “Control of low-speed airfoil aerodynamics.”AIAA J., 28(9), 1537–1552.
6.
Ho, C.-M., and Tai, Y.-C.(1996). “Review: MEMS and its applications for flow control.”J. Fluid Engrg., 118, 437–447.
7.
Kim, J., Kline, S. J., and Johnston, J. P. (1980). “Investigation of a reattaching turbulent shear layer: Flow over a backward-facing step.”J. Fluids Engrg., 102(Sept.), 302–308.
8.
Kline, R. (1985). The ultimate paper airplane. Simon and Schuster, New York, N.Y.
9.
Rao, D. M., and Campbell, J. F.(1987). “Vortical flow management techniques.”Progress in Aerosp. Sci., 24, 173–224.
10.
Thangam, S., and Hur, N.(1991). “A highly-resolved numerical study of turbulent separated flow past a backward-facing step.”Int. J. Engrg. Sci., 29(5), 607–615.
11.
Thangam, S., and Speziale, C. G.(1992). “Turbulent flow past a backward-facing step: A critical evaluation of two-equation models.”AIAA J., 30(5), 1314–1320.
12.
Witherspoon, S., and Finaish, F. (1996). “Computational studies of flow developments around airfoils with backward-facing steps.” SAE Paper No. 961297, Proc., SAE Aerospace Atlantic Mtg., Society of Automotive Engineers, Warrendale, Pa.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Jan 1, 1998
Published in print: Jan 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.