Approach to Analysis of Composite Structures Subjected to Action of High-Energy Laser Beam
Publication: Journal of Aerospace Engineering
Volume 10, Issue 1
Abstract
The paper presents a methodology that can be employed in numerical and analytical analyses of composite plates subjected to the action of a laser beam. The problem is related both to protection of composite components of aerospace structures from hostile high-energy laser weapons as well as to drilling holes in composites using a laser. In both cases, a three-dimensional state of stresses in the vicinity of the focal spot (the contact zone where the structure-laser beam interaction takes place) has to be evaluated. In addition, if a hostile laser locks on a structure, it is necessary to estimate changes in the structural response during and after the interaction. The paper outlines the solution of the problem of local three-dimensional stresses as well as an approach to the global response analysis. Finally, a practical problem where local damage exists in the structure as a result of a limited exposure to a laser beam is discussed. Numerical examples illustrate that even a small indentation produced by a laser can noticeably affect the natural frequencies of a composite beam.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Advanced composites design guide vol. IV, 3rd Ed., (1973). Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base, Ohio.
2.
Birman, V.(1996). “Thermal effects on measurements of dynamic processes in composite structures using piezoelectric sensors.”Smart Mat. and Struct., 5, 379–385.
3.
Birman, V., and Goldenberg, A. (1994). “Frequency method of detection of local damage in composites.”Reliability, stress analysis, and failure prevention of composite and active materials, E. Sancaktar and J. S. Lee, eds., ASME, New York, N.Y., 107–112.
4.
Carlslaw, H. S., and Jaeger, J. C. (1959). Conduction of heat in solids, 2nd Ed., Oxford University Press, New York, N.Y.
5.
Chamis, C. C. (1983). Simplified composite micromechanics equations for hygral, thermal and mechanical properties. NASA TM 83320, National Aeronautics and Space Administration, Washington, D.C.
6.
Hector, L. G. Jr., and Hetnarski, R. B.(1996). “Thermal stresses due to a laser beam.”J. Appl. Mech., 63, 38–46.
7.
Lax, M.(1977). “Temperature rise induced by a laser beam.”J. Appl. Phys., 48, 3919–3924.
8.
Lax, M.(1978). “Temperature rise induced by a laser beam II—the nonlinear case.”Appl. Phys. Letters, 33, 786–788.
9.
Powell, J. (1993). CO2 Laser cutting. Springer-Verlag KG, Berlin.
10.
Reddy, J. N. (1984). Energy and variational methods in applied mechanics. John Wiley & Sons, Inc., New York, N.Y.
11.
Tauchert, T. R. (1995). “Temperature and absorbed moisture.”Buckling and postbuckling of composite plates, G. J. Turvey and I. H. Marshall, eds., Chapman and Hall, London, 190–226.
12.
von Allmen, M., and Blatter, A. (1995). Laser-beam interaction with materials, 2nd Ed., Springer-Verlag KG, Berlin.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jan 1, 1997
Published in print: Jan 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.