Indigenous Resource Utilization in Design of Advanced Lunar Facility
Publication: Journal of Aerospace Engineering
Volume 5, Issue 2
Abstract
The most important consideration in the establishment and support of a permanently manned lunar base will be resource utilization. Seven potential lunar construction materials were analyzed with respect to their physical properties, processes, energy requirements, and resource efficiency. Reviewing the advantages and disadvantages of each material led to the selection of basalt as the primary construction material for initial use on a lunar base. The team conceptualized a construction system that combines lunar regolith sintering and casting to make pressurized structures. The design uses a machine that simultaneously excavates and sinters the lunar regolith to create a cylindrical hole. The hole is then enclosed with cast basalt slabs, allowing the volume to be pressurized for use as a living or work environment. Cylinder depths up to 4–6 m in the lunar mare and 10–12 m in the lunar highlands can be achieved. Advantages identified in the construction system include maximum resource utilization, relatively large habitable volumes, interior flexibility, and minimal construction equipment needs. The conclusions of this study indicate that there is significant potential for the use of basalt as a low‐cost alternative to Earth‐based materials. It remains to be determined, during lunar base phasing, whether this construction method should be implemented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Agosto, W. N., Wickman, J. H., and James, E. (1988). “Lunar cements/concretes for orbital structures.” Engineering, construction, and operations in space, S. W. Johnson and J. P. Wetzel, eds., ASCE, New York, N.Y., 157–168.
2.
Binder, A. B. (1988). “Lunar resources: What is known and expected.” Engineering, construction, and operations in space, S. W. Johnson and J. P. Wetzel, eds., ASCE, New York, N.Y., 48–54.
3.
Binder, A. B., Culp, M. A., and Toups, L. D. (1990). “Lunar derived constructions materials: Cast basalt.” Engineering, construction, and operations in space II, S. W. Johnson and J. P. Wetzel, eds., ASCE, New York, N.Y., 117–122.
4.
Blacic, J. (1985). “Mechanical properties of lunar materials under anhydrous, hard vacuum conditions: Applications of lunar glass structural components.” Lunar bases and space activities of the 21st century, W. W. Mendell, ed., Lunar Planetary Institute, Houston, Tex., 487–495.
5.
Carter, J. L. (1985). “Lunar regolith fines: A source of hydrogen.” Lunar bases and space activities of the 21st century, W. W. Mendell, ed., Lunar Planetary Institute, Houston, Tex., 571–581.
6.
“Design of a lunar colony.” (1972). Report, C. Dalton and E. Hohmann, eds., NASA Manned Spaceflight Center and Rice University, Houston, Tex.
7.
Ernsberger, F. M. (1969). “Tensile and compressive strength of pristine glasses by an oblate bubble technique.” Phys. Chem. Glasses, 10, 240–245.
8.
Freitas, R. A., and Gilbreath, W. P. (1982). “Advanced automation for space missions.” NASA Conf. Publication 2255, National Aeronautics and Space Administration, Washington, D.C., 96–101, 162, 182–183.
9.
Frier, W. T. (1942). Elementary metalurgy. McGraw‐Hill Book Co., Inc., New York, N.Y.
10.
Guerra, L. (1988). “A commonality assessment of lunar surface habitation.” Engineering, construction, and operations in space, S. W. Johnson and J. P. Wetzel, eds., ASCE, New York, N.Y., 274–286.
11.
Haskin, L. A. (1985). “Toward a spartan scenario for use of lunar materials.” Lunar bases and space activities of the 21st century, W. W. Mendell, ed., Lunar Planetary Institute, Houston, Tex., 571–581.
12.
Kopecky, L., and Voldan, J. (1965). “The cast basalt industry.” Annals, New York Academy Of Sciences, Vol. 123, 1086–1105.
13.
LaCourse, W. C. (1972). The strength of glass: Introduction to glass science, L. D. Pye, H. J. Stevens, and W. C. LaCourse, eds., Plenum Press, New York, N.Y., 451–543.
14.
Leonard, R. S., and Johnson, S. W. (1988). “Sulfur‐based construction materials for lunar construction.” Engineering, construction, and operations in space, S. W. Johnson and J. P. Wetzel, eds., ASCE, New York, N.Y., 1295–1307.
15.
Lin, T. D. (1985). “Concrete for lunar base construction.” Lunar bases and space activities of the 21st century, W. W. Mendell, ed., Lunar Planetary Institute, Houston, Tex., 381–390.
16.
Namba, H., Isikawa, I., Kanamari, H., and Okada, T. (1988). “Concrete production method for construction of lunar bases.” Engineering, construction, and operations in space, S. W. Johnson and J. P. Wetzel, eds., ASCE, New York, N.Y., 169–177.
17.
Phinney, W. C., Criswel, D., Drexler, E., and Garmirian, J. (1977). “Lunar resources and their utilization.” Space based manufacturing from non‐terrestrial materials, G. K. O'Neill and B. O'Leary, eds., Prog. Astronaut and Aeronaut, 57, 97–123.
18.
Schmitt, H. (1988). “Constraints on lunar base construction.” Engineering, construction, and operations in space, S. W. Johnson and J. P. Wetzel, eds., ASCE, New York, N.Y., 35–45.
19.
Simonds, C. H. (1973). “Sintering and hot pressing of Fra Mauro composition glass and the formation of lunar breccias.” American J. of Sci., 273, 428–439.
20.
Simonds, C. H. (1988). “Hot pressing of lunar soil and qualification for manned applications.” Engineering, construction, and operations in space, S. W. Johnson and J. P. Wetzel, eds., ASCE, New York, N.Y., 35–45.
21.
Taylor, S. R. (1975). Lunar science: A post‐Apollo view. Pergamon Press Inc., New York, N.Y.
22.
Uhlmann, D. R., Klein, L., Kritchevsky, G., and Hopper, R. W. (1974). “The formation of lunar glasses.” Proc., 5th Lunar Sci. Conf., 2317–2331.
23.
Uhlmann, D. R., Klein, L., Onorato, P. I. K., and Hopper, R. W. (1975). “The formation of lunar breccias: Sintering and recrystallization.” Proc., 6th Lunar Sci. Conf., 693–705.
24.
Williams, R. J., and Jadwick, J. J. (1980). Handbook of lunar materials: NASA Ref. Public. 1057, National Aeronautics and Space Administration (NASA), Washington, D.C.
25.
Woods, M. (1989). “Scientists learn when glass will crack,” Houston Chronicle, (Sept. 11).
26.
Young, J. F., and Berger, R. L. (1988). “Cement‐based materials for planetary facilities.” Engineering, construction, and operations in space, S. W. Johnson and J. P. Wetzel, eds., ASCE, New York, N.Y., 134–145.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Apr 1, 1992
Published in print: Apr 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.