General Approach to Dynamic Analysis of Rotorcraft
Publication: Journal of Aerospace Engineering
Volume 4, Issue 1
Abstract
This paper presents a general‐purpose mathematical formulation for the dynamic analysis of a rotorcraft consisting of flexible or rigid components, or both, that may undergo large rotations. In this formulation, two sets of coordinates are used, namely rigid‐body coordinates and elastic coordinates. The rigid‐body coordinates define the location and the orientation of a body frame with respect to an inertial frame. The rigid‐body rotational coordinates may be Euler angles, Euler‐like angles, or Euler parameters. The elastic coordinates define the elastic deformations with respect to the body frame. Nonlinear strain‐displacement relations are considered in order to be able to incorporate the effect of geometric stiffening. A systematic methodology that combines the traditional finite element and multibody approaches is developed to obtain a set of differential and algebraic equations governing the dynamics of the system. The resulting set of equations is highly nonlinear. Numerical schemes to solve this set of equations are also discussed. The formulation presented is general and allows the development of a modular code. The formulation also allows the code to be updated and grow without reformulation of the problem.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Agrawal, O. P., and Shabana, A. A. (1986). “Application of deformable‐body mean‐axis to flexible multibody system dynamics.” Comput. Meth. Appl. Mech. Engrg., 56(2), 217–245.
2.
Agrawal, O. P., and Saigal, S. (1989). “Dynamic analysis of multibody systems using tangent coordinates.” Comput. Struct., 31(3), 349–355.
3.
Amirouche, F. M. L., Jia, T., and Ider, S. K. (1988). “A recursive householder transformation for complex dynamical systems with constraints.” J. Appl. Mech., 55(3), 729–734.
4.
Berman, A. (1982). Dynamic system coupling (DYSCO) program, TR‐81‐D‐42A B, U.S. Army Aviation Research and Development Command, Fort Eustis, Va.
5.
Baumgarte, J. (1972). “Stabilization of constraints and integrals of motion in dynamic systems.” Comput. Meth. Appl. Mech. Engrg., 1(1), 1–16.
6.
Bielawa, R. L. (1976). “Aeroelastic analysis for helicopter rotor blades with time variable nonlinear structural twist and multiple structural redundancy—mathematical derivation and program user's manual.” CR‐2368, National Aeronautic and Space Administration, Washington, D.C.
7.
Chang, C. O., and Nikravesh, P. E. (1985). “An adaptive constraint violation stabilization method for dynamic analysis of mechanical systems.” J. Mech. Trans., Automat. Design, 107(4), 488–492.
8.
Goldstein, H. (1980). Classical mechanics, Addison‐Wesley Publishing Co., Inc., Reading, Mass.
9.
Hodges, D. H. (1979). “An aeromechanical stability analysis for bearingless rotor helicopter.” J. Am. Helicopter Soc., 24(1), 2–9.
10.
Hodges, D. H., Hopkins, A. S., Kunz, D. L., and Hinnant, H. E. (1989). “Analysis of structures with rotating, flexible substructures applied to rotorcraft aeroelasticity.” AIAA J., 27(2), 192–200.
11.
Jalon, J. G. C., Avello, A., and Jimenez, J. M. (1987). “Basis for null‐space for the Jacobian matrix of constrained multibody systems.” Proc. Seventh World Congress on the Theory of Machines and Mechanisms, 1, 501–504.
12.
Johnson, W. (1986). “Assessment of aerodynamic and dynamic models in a comprehensive analysis for rotorcraft.” Comput. Math. Appl., 12A(1), 11–28.
13.
Kim, S. S., and Vanderploeg, M. J. (1986). “QR decomposition for state space representation of constrained mechanical systems.” J. Mech., Trans., Automat. Design, 108(2), 183–188.
14.
Liang, C. G., and Lance, G. M. (1987). “A differential null space method for constrained dynamic analysis.” J. Mech. Trans. Automat. Design, 109(3), 405–411.
15.
Lotstedt, P. (1965). “On a penalty function method for the simulation of mechanical systems subject to constraints.” TRITA‐NA‐7919, Royal Institute of Technology, Stockholm, Sweden.
16.
Mani, N. K., Haug, E. J., and Atkinson, K. E. (1985). “Application of singular value decomposition for analysis of mechanical system dynamics.” J. Mech., Trans., Automat. Design, 107(1), 82–87.
17.
McLarty, T., et al. (1977). Rotorcraft flight simulation with coupled rotor aeroelastic stability analysis, Vol. I, engineer's manual, TR‐76‐41A, U.S. Army Air Mobility Research and Development Laboratory, Fort Worth, Tex.
18.
Park, K. C. (1986). “Stabilization of computational procedures for the constrained dynamic systems: Formulation.” Paper 86‐0926‐CP, AIAA.
19.
Reaser, J. S., and Kretsinger, P. H. (1978). REXOR‐II, rotorcraft simulation model, Vol. I, engineering documentation. CR‐145331, National Aeronautic and Space Administration, Washington, D.C.
20.
Shabana, A. A. (1989). Dynamics of multibody systems, John Wiley & Sons, New York, N.Y.
21.
Shabana, A., and Wehage, R. A. (1983). “A coordinate reduction technique for transient analysis of spatial structures with large angular rotations.” J. Struct. Mech., 11(3), 401–431.
22.
Singh, R. P., and Likins, P. W. (1985). “Singular value decomposition for constrained dynamical systems.” J. Appl. Mech., 52(4), 943–948.
23.
Wehage, R. A., and Haug, E. J. (1982). “Generalized coordinate partitioning for dimension reduction in analysis of constrained dynamic systems.” J. Mech. Design, 104(1), 247–255.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Jan 1, 1991
Published in print: Jan 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.