Analysis of Rim Supports for Off‐Axis Inflatable Reflectors. I: Loads
Publication: Journal of Aerospace Engineering
Volume 4, Issue 1
Abstract
A structural analysis is performed for the rim support of a pressurized off‐axis paraboloidal membrane, serving as a space‐based solar concentrator. The function of the rim support is to take up the tensile forces created by the stretched membrane. This paper deals with the load analysis. The tensile forces transmitted by the membrane to the rim support are calculated, and are proportional to pb, where p is the inflation pressure and b is one‐half the major axis of the elliptical rim. Next, the internal forces and moments generated in the rim support by the membrane forces are calculated. The compression forces are considerably larger, at any point, than the shear forces; both are proportional to The bending moments are proportional to The critical point is found to be at the top of the rim, where both the bending moment and compression force are at their maximum.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arduini, A., Ponzi, U., and Bernasconi, C. M. (1988). “A contribution to the study of the precise pressurized structures.” Paper No. IAF‐88‐268, (39th Int. Astronautical Congress), International Astronautical Federation, Oct.
2.
Belvin, W. K., Edighoffer, H. H., and Herstrom, C. L. (1987). “Quasi‐static shape adjustment of a 15 meter diameter space antenna.” AIAA/ASME/ASCE/AHS 28th Struct., Struct. Dynamics and Matls. Conf., American Institute of Aeronautics and Astronautics, Apr., part 1, 705–713.
3.
Grossman, G., and Williams, G. (1989). “Inflatable concentrators for solar propulsion and dynamic space power.” Proc. ASME Int. Solar Energy Conf., American Society of Mechanical Engineers, 39–45.
4.
Hedgepeth, J. M. (1985). “New concepts for precision reflector support structure.” Paper No. IAF‐85‐208, (36th Int. Astronautical Congress), International Astronautical Federation, Oct.
5.
Kato, S., et al. (1988). “Concept of inflatable elements supported by truss structure for reflector application.” Paper No. IAF‐88‐274 (39th Int. Astronautical Congress), International Astronautical Federation, Oct.
6.
Marin, J., and Sauer, J. A. (1954). Strength of materials. The McMillan Co., New York, N.Y., 238–269.
7.
Popov, E. P. (1952). Mechanics of materials. Prentice Hall, Englewood Cliffs, N.J., 525–556.
8.
Roark, R. J. (1971). Formulas for stress and strain, McGraw‐Hill Book Co., New York, N.Y., 300.
9.
Thomas, M., and Friese, G. J. (1980). “Pressurized antennas for space radars.” Conf. on Sensor Systems for the 80's, American Institute of Aeronautics and Astronautics, 65–71.
10.
Williams, G. (1987). “Inflatables for lightweight satellite applications.” 1st Annual USU Conf. on Small Satellites, Utah State University, Oct.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Jan 1, 1991
Published in print: Jan 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.