Bridge Embankments. I: Seismic Risk Assessment and Ranking
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article has a reply.
VIEW THE REPLYPublication: Journal of Performance of Constructed Facilities
Volume 22, Issue 3
Abstract
The objective of this study is to provide a simple methodology to conduct preliminary seismic assessment and ranking of bridge embankments in order to identify and prioritize embankments that are susceptible to failure. A ranking model that provides a priority list of embankments with the highest seismic risk of failure is generated. A step-by-step methodology is presented in a flowchart to estimate the seismic slope stability capacity/demand ratio, displacement, and liquefaction potential of bridge embankments. Three categories are presented to identify the failure risk of the embankments. The ranking model is useful for a quick sensitivity assessment of the effect of various site conditions, earthquake magnitudes, and site geometry on possible movement of designated embankments. The priority list will enable decision makers to decide on either carrying out further detailed evaluation or consider other appropriate actions for the bridge embankments with the highest seismic failure risk.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The support of the Federal Highway Administration, the Transportation Cabinet of the Commonwealth of Kentucky, and the Kentucky Transportation Center are gratefully acknowledged.
References
AASHTO. (2002). Standard specifications for highway bridges, 17th Ed., Washington, D.C.
Ambraseys, N. N., and Menu, J. M. (1988). “Earthquake induced ground displacements.” Earthquake Eng. Struct. Dyn., 16, 985–1006.
Banbury, C. (1997). “Seismic ranking analyses and stability assessments for Kentucky highway embankments.” MSc thesis, Univ. of Kentucky, Lexington, Ky.
Buckle, I. G., and Friedland, I. M. (1995). Seismic Retrofitting Manual for Highway Bridges, Rep. No. FHWA-RD-94-052, Federal Highway Administration, Washington, D.C.
Cocks, G., and Wilmot, A. (2005). “Meckering earthquake and the Scout Hall slip.” Proc., of the Australian Earthquake Engineering Society, Australian Earthquake Engineering Society, Albury, New South Wales, Australia.
Dickenson, S., McCullough, N., Barkau, M., and Wavra, B. (2002). “Assessment and mitigation of liquefaction hazards to bridge approach embankments in Oregon.” Rep. No. SPR 361, Oregon Dept. of Transportation, Corvallis, Ore.
Dodds, A. M. (1997). “Seismic deformation analysis for Kentucky highway embankments.” MSc thesis, Univ. of Kentucky, Lexington, Ky.
Franklin, A. G., and Chang, F. K. (1977). “Permanent displacements of earth embankments by Newmark sliding block analysis.” Rep. No. 5, Miscellaneous Papers S-71-17, U.S. Army Corps of Engineers Waterways Experiment Station, Vicksburg, Miss.
Janbu, N. (1954). “Stability analysis of slopes with dimensionless parameters.” Harvard soil mechanics series, No. 46, Pierce Hall, Cambridge, Mass.
Kyrou, K. (2002). “Seismic slope stability analysis.” Proc. Int. Conf. on Earthquake Risk Minimization, G. Petrides and K. Kyrou, eds., Geological Survey Dept., Nicosia.
Naval Facilities Engineering Command (NAVFAC). (1986). “Soil mechanics.” DM7.01, Dept. of Navy, Alexandria, Va.
Newmark, N. M. (1965). “Effects of earthquakes on dams and embankments.” Geotechnique, 15(2), 139–160.
Seed, H. B., Idriss, I., and Arango, I. (1983). “Evaluation of liquefaction potential using field performance data.” J. Geotech. Engrg., 109(3), 458–482.
Seed, H. B., Tokimatsu, K., Harder, L. F., and Chung, R. M. (1985). “The influence of SPT procedures in soil liquefaction resistance evaluations.” J. Geotech. Engrg., 111(12), 1425–1445.
Seed, R., and Harder, L. (1990). “SPT-based analysis of cyclic pore pressure generation and undrained residual strength.” Proc., H. Bolton Seed Memorial Symp., Vol. 2, Univ. of California-Berkeley, Berkeley, Calif., 351–376.
Street, R., Wang, Z., Harik, I., Allen, D., and Griffin, J. (1996). “Source zones, recurrence rates, and time histories for earthquakes affecting Kentucky.” Rep. No. KTC-96-4, Kentucky Transportation Center, Univ. of Kentucky, Lexington, Ky.
Sutterer, K., Banbury, C., and Dodds, A. (1999). Ranking system for seismic stability of Kentucky highway embankments, Transportation Research Board, Washington, D.C.
Sutterer, K., Harik, I., Allen, D., and Street, R. (2000). “Ranking and assessment of seismic stability of highway embankments in Kentucky.” Research Rep. No. KTC-00-1, Kentucky Transportation Center, Univ. of Kentucky, Lexington, Ky.
Trandafir, C., and Sassa, K. (2005). “Seismic triggering of catastrophic failures on shear surfaces in saturated cohesionless soils.” Can. Geotech. J., 42(1), 229–251.
Trandafir, C., Sassa, K., and Fukuoka, H. (2003). “Assessment of undrained seismic displacements on shear surfaces in saturated cohesionless soils.” Annuals of Disaster Prevention Research Institute, No. 46 B, Kyoto Univ., Kyoto, Japan.
United States Department of Agriculture (USDA). (undated ). Soil Conservation Service, map.
United States Geologic Survey (USGS). (undated ). Geologic Quadrant Maps of the United States, map.
Yegian, M., Marciano, E., and Ghahraman, V. (1991). “Earthquake-induced permanent deformations: Probabilistic approach.” Hypertens. Res., 117(1), 35–50.
Zatar, W. A., and Harik, I. E. (2008). “Bridge embankments. Part II: Seismic risk for I-24 in Kentucky.” J. Perform. Constr. Facil., 22(3), 181–190.
Zatar, W., Harik, I. E., and Peng, Y. (2006) “Seismic evaluation and ranking of bridges and embankments along I-24 in western Kentucky.” Research Rep. No. KTC-06-26/SPR206-00-7F, Kentucky Transportation Center, Univ. of Kentucky, Lexington, Ky.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jul 7, 2006
Accepted: May 14, 2007
Published online: Jun 1, 2008
Published in print: Jun 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.