Global System Considerations for Progressive Collapse with Extensions to Other Natural and Man-Made Hazards
Publication: Journal of Performance of Constructed Facilities
Volume 20, Issue 4
Abstract
One of the most frequently used approaches for minimizing the potential for progressive collapse in buildings is the alternate path method. The appeal of this method is primarily due to its relative simplicity and threat independent specification. Applications of the alternate path method typically employ a component design strategy in which the adequacy of the system is based on individual structural components successfully satisfying the acceptance criteria. This design philosophy is also used in evaluating other extreme loading conditions such as seismic loads and direct blast loads. However, the adequacy of the global structural system is not usually investigated during this component design process. This paper details the importance of investigating global effects when evaluating the potential for progressive collapse in buildings. There are two types of frames that will be evaluated: moment-resisting (sway) frames and nonsway frames that include lateral-force resisting elements, such as shear walls. The necessity for considering the global response of a damaged structure becomes apparent following the evaluation of the overall stability of these systems. In addition, the conclusions concerning progressive collapse investigations will be generalized for application to seismic and direct blast hazards. A simple design and analysis method will be introduced, along with the associated acceptance criteria.
Get full access to this article
View all available purchase options and get full access to this article.
References
AISC. (2001). Load & resistance factor design: Manual of steel construction, Chicago.
Allen, D. E., and Schriever, W. R. (1972). “Progressive collapse, abnormal loads, and building codes.” Division of Building Research, National Research Council.
American Concrete Institute (ACI). (2005). “Building code requirements for structural concrete.” ACI 318-05, Farmington Hills, Mich.
ASCE. (1972). Structural failures: Modes, causes, responsibilities, Research Council on Performance of Structures, Cleveland.
ASCE. (2002). “Minimum design loads for buildings and other structures.” ASCE 7-02, Reston, Va.
Biggs, J. M. (1964). Introduction to structural dynamics, New York.
Ettouney, M., and DiMaggio, P. (1998). “Integrated study of progressive collapse of buildings.” Proc., Structural Engineering World Congress 1998, San Francisco.
Ettouney, M., Hansen, E., Hapij, A., Lawver, D., Tang, M., Tennant, D., Vaughan, D., and Xie, M. (2004). “Development of a progressive collapse tool.” Rep. No. WA-0403, Prepared for Combating Terrorism Technology Support Office/Technical Support Working Group (CTTSO/TSWG), Arlington, Va.
Glover, N. (1996). “The Oklahoma City Bombing: Improving building performance through multi-hazard mitigation (FEMA 277) by Building Performance Analysis team,” ASCE, Reston, Va.
Multihazard Mitigation Council (MMC). (2002). Proc., National Workshop on the Prevention of Progressive Collapse, Chicago.
Naeim, F. (1989). The seismic design handbook, Van Nostrand Reinhold, New York.
Nair, R. (2003). “Progressive collapse basics.” Proc., Steel Building Symp. Blast and Progressive Collapse Resistance, New York.
Paulay, T., and Priestley, M. (1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York.
Smith, J. L., Brokaw, J. T., and Swatzell, S. R. (1998). “Progressive collapse analysis and design guidance summary report documenting the literature review findings.” Rep. No. ARA-TR-98-4854-1.
Tamboli, A. (1997). Steel design handbook, McGraw-Hill, New York.
Uniform Facilities Criteria (UFC). (2003) “Uniform facilities criteria: department of defense minimum antiterrorism standard for buildings.” UFC 4-010-01.
U.S. General Services Administration (GSA). (2003). “ISC security design criteria for new federal office buildings and major modernization projects.”
Whittaker, A., Hamburger, R., and Mahoney, M. (2003). “Performance-based engineering of buildings for extreme events.” Proc., Steel Building Symp. Blast and Progressive Collapse Resistance, New York.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Apr 18, 2006
Accepted: May 18, 2006
Published online: Nov 1, 2006
Published in print: Nov 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.