Evaluation of a Dike Damaged by Pile Driving in Soft Clay
Publication: Journal of Performance of Constructed Facilities
Volume 19, Issue 4
Abstract
This paper presents a case study detailing a riverbank dike damaged by pile driving in very soft clay in Shanghai, P. R. China. Driven piles were designed to support the existing dike to be raised to a higher elevation. The subsoil mainly consisted of very soft clay with its natural moisture content greater than its liquid limit. This paper describes the phenomena of dike movement and crack development during pile driving based on field observations and instrumentation data. Cone penetration tests and vane shear tests were conducted after pile driving to investigate the slip surfaces. Degradation of soil strength was identified as the main cause for the failure of this dike. Slope stability analysis was conducted to back-calculate the degraded undrained shear strength of the clay. The results indicate that the soil strength in the disturbed area due to pile driving approached the level of its remolded strength.
Get full access to this article
View all available purchase options and get full access to this article.
References
Asaoka, A., Kodaka, T., and Nozu, M. (1994). “Undrained shear strength of clay improved with sand compaction piles.” Soils Found., 34(4), 23–32.
Bjerrum, L. (1973). “Problems of soil mechanics and construction on soft clay and structurally unstable soils.” Proc., 8th Int. Conf. on Soil Mechanics and Foundation Engineering, Moscow, 3, 111–157.
Hwang, J. H., Liang, N., and Chen, C. H. (2001). “Ground response during pile driving.” J. Geotech. Geoenviron. Eng., 127(11), 939–949.
Leonards, G. A., and Frost, J. D. (1992). “Discussion of ‘Necessary redundancy in geotechnical Engineering,’ by J. O. Osterberg.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 18(2), 331–333.
Massarsch, K. R. (1978). “New aspects of soil fracturing in clay.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 104(8), 1109–1123.
Poulos, H. G. (1995). “Design of reinforcing piles to increase slope stability.” Can. Geotech. J., 32, 808–818.
Poulos, H. G., and Davis, E. H. (1980). Pile foundation analysis and design, Wiley, New York.
Randolph, M. F., Carter, J. P., and Wroth, C. P. (1979). “Driven piles in clay—the effects of installation and subsequent consolidation.” Geotechnique, 29(4), 361–393.
Shanghai Construction Committee (SCC). (1999). “Shanghai Foundation design code.” DGJ08-11-1999, Shanghai, China (in Chinese).
Shen, S. L., Han, J., Huang, X. C., and Du, S. J. (2003a). “Laboratory studies on property changes in surrounding clays due to installation of deep mixing columns.” Marine Georesources and Geotechnology, 21(1), 15–35.
Shen, S. L., Miura, N., Han, J., and Koga, H. (2003b). “Evaluation of property changes in surrounding clays due to installation of deep mixing columns.” Grouting and Ground Treatment (GSP 120), ASCE, Reston, Va., 634–645.
Shen, S. L., Miura, N., and Koga, H. (2003c). “Interaction mechanism between deep mixing column and surrounding clay during installation.” Can. Geotech. J., 40(2), 293–307.
Spencer, E. (1967). “A method of analysis of the stability of embankments assuming parallel inter-slice forces.” Geotechnique, 17, 11–26.
Sun, G. S., and Zheng, D. T. (1984). Soft soil foundation and geotechnical engineering, China Architecture Industrial Press, Beijing (in Chinese).
Vesic, A. S. (1972). “Expansion of cavities in infinite soil mass.” J. Soil Mech. Found. Div., 98(3), 265–290.
Yasuhara, K. (1994). “Postcyclic undrained strength for cohesive soils.” J. Geotech. Eng., 120(11), 1961–1979.
Yasuhara, K., Hirao, K., and Hyde, A. F. (1992). “Effects of cyclic loading on undrained strength and compressibility of clay.” Soils Found., 32(1), 100–116.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Feb 10, 2004
Accepted: Aug 4, 2004
Published online: Nov 1, 2005
Published in print: Nov 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.