Progressive Analysis Procedure for Progressive Collapse
Publication: Journal of Performance of Constructed Facilities
Volume 18, Issue 2
Abstract
Following the collapse of the World Trade Center towers in September 2001, there has been heightened interest among building owners and government entities in evaluating the progressive collapse potential of existing buildings and in designing new buildings to resist this type of collapse. The General Services Administration and Department of Defense have issued general guidelines for evaluating a building’s progressive collapse potential. However, little detailed information is available to enable engineers to confidently perform a systematic progressive collapse analysis satisfying these guidelines. In this paper, we present four successively more sophisticated analysis procedures for evaluating the progressive collapse hazard: linear-elastic static; nonlinear static; linear-elastic dynamic; and nonlinear dynamic. We discuss the advantages and disadvantages of each method. We conclude that the most effective analysis procedure for progressive collapse evaluation incorporates the advantageous parts of all four procedures by systematically applying increasingly comprehensive analysis procedures to confirm that the possibility of progressive collapse is high.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE. (2002). “Minimum design loads for buildings and other structures.” American Society of Civil Engineers publication (note revision of 7-98, does not include building security or antiterrorism but covers all natural hazards), ISBN: 0-7844-0624-3.
Clough, R. W., and Penzien, J. (1993). Dynamics of structures, 2nd Ed., McGraw-Hill, New York.
Corley, W. G. (2002). “Applicability of seismic design in mitigating progressive collapse.” National Workshop on Prevention of Progressive Collapse in Rosemont, Ill, Multihazard Mitigation Council of the National Institute of Building Sciences, Washington, D.C.
Department of Defense (DoD). (2002). “Unified facilities criteria (UFC), DoD minimum antiterrorism standards for buildings.” Department of Defense, UFC 4-010-01, U.S. Army Corps of Engineering, Washington, D.C., 31.
Dusenberry, D. O. (2002). “Review of existing guidelines and provisions related to progressive collapse.” National Workshop on Prevention of Progressive Collapse in Rosemont, Ill, Multihazard Mitigation Council of the National Institute of Building Sciences, Washington, D.C.
Federal Emergency Management Agency. (FEMA). (1997). “NEHRP guidelines for the seismic rehabilitation of buildings.” FEMA-273, Washington, D.C.
Federal Emergency Management Agency. (FEMA). (1997). “NEHRP commentary on the guidelines for the seismic rehabilitation of buildings.” FEMA-274 Washington, D.C.
General Services Administration (GSA). (2000). Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects. Office of Chief Architect, Washington, D.C.
Krauthammer, T., Hall, R. L., Woodson, S. C., Baylot, J. T., Hayes, J. R., and Sohn, Y. (2002). “Development of progressive collapse analysis procedure and condition assessment for structures.” National Workshop on Prevention of Progressive Collapse in Rosemont, Ill. Multihazard Mitigation Council of the National Institute of Building Sciences, Washington, D.C.
SAP2000. (2002). Version 8, analysis reference manual, Computers and Structures, Inc., Berkeley, Calif.
Wilson, E. L. (2002). Three dimensional static and dynamic analysis of structures, 3rd Ed., Computers and Structures, Inc., Berkeley, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jun 23, 2003
Accepted: Sep 29, 2003
Published online: Apr 15, 2004
Published in print: May 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.