Cladding Design: Whose Responsibility?
Publication: Journal of Performance of Constructed Facilities
Volume 5, Issue 3
Abstract
Cladding failures are on the rise. First, a consolidated effort and sole responsibility are necessary for the successful and reliable performance of cladding. Second, it is becoming increasingly apparent that there must be a rational basis for cladding design. Engineered solutions are sorely needed for the following traditional aspects of cladding: durability and integrity of cladding materials, and the design and analysis of cladding and its connections to the structural frame. It is imperative that the concepts involved in these engineered solutions are taught to architectural students and conveyed to practitioners. Most importantly, these solution must be disseminated in the form of design standards and guidelines presented in engineering formats. Described in this paper are some of the issues involved to trying to develop engineered solutions, as well as recommendations for the introduction of “principles of cladding” into education and practice.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ASCE Task Committee on Drift Control of Steel Building Structures of the Committee on the Design of Steel Building Structures, ASCE. (1988). “Wind drift design of steel‐framed buildings: State‐of‐the‐art report.” J. Struct. Engrg., ASCE, 114(9), 2085–2189.
2.
Bell, R. G., and Schwartz, T. A. (1989). “Earthquake hazards and the design of constructed facilities in the eastern United States.” Annals of the New York Academy of Sciences, K. H. Jacob and C. J. Turkstra, eds., New York Academy of Sciences, New York, N.Y., Vol. 558, 300–314.
3.
Brock, L. (1991). “Facade failures: A backward look at responsibility.” Proc., 9th Annual Tech. Conf., Harvard University, Cambridge, Mass.
4.
Cohen, J. M., and Monteiro, P. J. M., (1991). “Durability and integrity of marble cladding: A state‐of‐the‐art review.” J. Perf. Constr. Fac., ASCE, 5(2), 113–124.
5.
Davies, J. M., and Bryan, E. R. (1982). Manual of stressed skin diaphragm design. John Wiley and Sons, Inc., New York, N.Y.
6.
Goodno, B. J., and Palsson, H. (1986). “Analytical studies of building cladding.” J. Struct. Engrg., ASCE, 112(4), 665–676.
7.
Henry, R. M., and Roll, F. (1986). “Cladding‐frame interaction.” J. Struct. Engrg., ASCE, 112(4), 815–834.
8.
Loos, A. (1982). “The principle of cladding.” Translated by J. O. Newman and J. H. Smith. Spoken into the void: Collected essays 1897—1900, Opposition Books, The M.I.T. Press, Cambridge, Mass., 66–69.
9.
Marble design manual III. (1988). Marble Institute of America, Farmington, Mich.
10.
Miller, C. J. (1972). “Analysis of multistory frames with light gauge steel panel walls.” Report 349, Dept. of Struct. Engrg., Cornell Univ., Ithaca, N.Y.
11.
Monk, C. B. (1985). “The Rational Use of Masonry,” Proc., 3rd North American Masonry Conf., University of Texas at Austin, Austin, Tex., 74‐1‐74–20.
12.
Peters, T. F. ( 1986 ). “ Report of an ongoing experiment: Case studies in construction as examples of theoretical approaches to teaching technology in architecture,” J. Architectural Education, 39 ( 4 ), 11 – 21.
13.
Peters, T. F. (1988). “The relative value of invention and the history of tall buildings.” Second century of the skyscraper. L. S. Beedle, ed., Van Nostrand Reinhold, New York, N.Y.
14.
Poland, C. (1988). “Life‐safety, key to seismic evaluation.” Civ. Engrg., ASCE, 58(7), 62–65.
15.
Thomasen, S. E., and Ewart, C. E. (1984). “Durability of thin‐set marble.” 3rd Int. Conf. on the Durability of Building Mat. and Components, Espoo, Finland.
16.
Tomasseti, R. L., Gutman, A., Lew, I. P., and Joseph, L. M. (1986). “Development of thin wall cladding to reduce wind drift in hi‐rise buildings.” IABSE Stockholm Colloquium Proc., Zurich, Switzerland, Vol. 49, 239–246.
17.
Trewhitt, J., and Tuchman, J. (1988). “Amoco may replace marble on Chicago headquarters.” ENR, March 24, 11–12.
18.
Wilson, F. ( 1989 ). “ The perils of using thin stone and safeguards against them.” ARCHITECTURE, 78 ( 2 ), 96 – 97.
19.
Youssef, N. ( 1988 ). “ What's irregular? ” Civ. Engrg., 58 ( 8 ), 74.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Aug 1, 1991
Published in print: Aug 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.