Underground Leakage into Freezing Ground
Publication: Journal of Cold Regions Engineering
Volume 13, Issue 2
Abstract
Certrifuge model tests are used to identify the path of dyed ethylene glycol (antifreeze) when it leaks from a cylinder buried in freezing or frozen silt at different times during the freezing cycle. The paths followed are contrasted to the path followed by release of dyed water from the same cylinder in a model undergoing freezing, and in another model, to the path followed by release of the ethylene glycol from the cylinder into soil not subjected to freezing. When ethylene glycol is released after freezing has penetrated well below the elevation of the leak, it is contained, at least over that duration (simulating 0.4 years), by the surrounding ice rich frozen soil. The same behavior is observed when ethylene glycol is released into unfrozen soil that experiences no subsequent freezing. When ethylene glycol is released before freezing, subsequent freezing draws the contaminant vertically to the soil surface. When it is released as freezing is occurring at the elevation at which the ethylene glycol is released, its path is long and inclined upward, moving far from the point of injection; dyed water released at the same elevation and at the same point during the freezing process does not travel far from the point of injection before being frozen in place.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chamberlain, E. J. ( 1986). “A universal frost susceptibility test apparatus.” U.S. Army CRREL Rep., Prepared for the Transportation Research Board, U.S. Army Cold Regions Research Engineering Laboratory, Hanover, N.H.
2.
Culligan-Hensley, P. J., and Savvidou, C. ( 1995). “Environmental geomechanics and transport processes.” Geotechnical centrifuge technology, Blackie Academic and Professional Publishers, U.K., 196–263.
3.
Dash, J. G., Fu, H. Y., and Leger, R. ( 1997). “Frozen soil barriers for hazardous waste confinement.” S. Knutsson, ed., Proc., Ground Freezing—Frost Action in Soil, A. A. Balkema, The Netherlands, 375–380.
4.
Ketcham, S. A., Black, P. B., and Pretto, R. (1997). “Frost heave loading of a constrained footing by centrifuge modeling.”J. Geotech. Engrg., ASCE, 123(9), 874–880.
5.
Miller, E. E. ( 1980). “Similitude and scaling of soil-water phenomena.” Applications of soil physics, D. Hillel, ed., Academic, New York, 300–318.
6.
Miller, R. D. ( 1990). “Scaling of freezing phenomena in soils.” Scaling in soil physics: Principle and applications, D. Hillel and D. E. Elrick, eds., 1-11, Soil Science Society of America, Special Publication No. 25.
7.
Miller, E. E., and Miller, R. D. ( 1956). “Physical theory for capillary flow phenomena.” J. Appl. Physics, 27(4), 324–332.
8.
Taylor, R. N. ed. ( 1995). Geotechnical centrifuge technology, Blackie Academic and Professional Publishers, U.K.
9.
Yang, D. ( 1997). Investigation of the scaling laws for centrifuge modelling of frost heave,” PhD dissertation, University of Maryland, College Park, Md.
10.
Yang, D., and Goodings, D. J. (1998). “Climate soil freezing modeled in a centrifuge.”J. Geotech. and Geoenvir. Engrg., 124(12), 1186–1194.
Information & Authors
Information
Published In
History
Received: Jul 21, 1998
Published online: Jun 1, 1999
Published in print: Jun 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.