Discussion of “Mechanical Properties of First‐Year Sea Ice at Tarsiut Island” by Jacqueline A. Richter‐Menge and Erland M. Schulson
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article has a reply.
VIEW THE REPLYPublication: Journal of Cold Regions Engineering
Volume 11, Issue 1
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adamson, R. M., Dempsey, J. P., DeFranco, S. J., and Yunbo, X. (1995). “Large‐scale in‐situ ice fracture experiments, part I: experimental results.” Ice Mech. 1995, ASME AMD, 201, 107–128.
2.
Buck, S. E., Nickolayev, O. Y., and Schulson, E. M. (1994). “Failure envelopes and the ductile to brittle transition in S2 freshwater and saline ice under biaxial compression.” Proc., IAHR Ice Symp., Int. Assn. of Hydraulic Research, Delft, The Netherlands, 1, 454–463.
3.
Chen, A. C. T., and Lee, J. (1986). “Large‐scale ice strength tests at slow strain rates.” Proc., ASME Int. Conf. on Offshore Mech. and Arctic Engrg., 4, 374‐384, ASME, New York, N.Y.
4.
Comfort, G., and Ritch, R. (1990). “Field measurement of pack ice stresses.” Proc., 9th Int. Conf. on Offshore Mech. and Arctic Engrg., ASME, New York, N.Y., IV, 177–181.
5.
Comfort, G., Ritch, R., and Frederking, R. M. W. (1992). “Pack ice stress measurements.” Proc., 10th Int. Conf. on Offshore Mech. and Arctic Engrg., ASME, New York, N.Y., IV, 245–253.
6.
Coon, M. D., Lau, P. A., Bailey, S. H., and Taylor, B. J. (1989). “Observations of ice floe stress in the eastern arctic.” Proc., 10th Int. Conf. on Port and Oc. Engrg. under Arctic Conditions, K. B. E. Axelsson and L. A. Fransson, eds., Univ. of Technology, Lulea, Sweden, 1, 1943–1973.
7.
Croasdale, K. R., Comfort, G., Frederking, R., Graham, B. W., and Lewis, E. L. (1988). “A pilot experiment to measure arctic pack‐ice driving forces.” Proc., 9th Int. Conf. on Port and Oc. Engrg. under Arctic Conditions, W. M. Sackinger and M. O. Jeffries, eds., Univ. of Alaska, Geophys. Inst., Fairbanks, Alaska, 3, 381–395.
8.
Dykins, J. E. (1970). “Ice engineering: tensile properties of sea ice grown in a confined system.” NCEL Tech. Rep. R680, Naval Civil Engineering Laboratory, Port Hueneme, Ca.
9.
Gratz, E. T, and Schulson, E. M. (1994). “Preliminary observations of brittle compressive failure of columnar saline ice under triaxial loading.” Annals of Glaciology, 19, 33–38.
10.
Kuehn, G. A., Lee, R. W., Nixon, W. A., and Schulson, E. M. (1990). “The structure and tensile behavior of first‐year sea ice and laboratory‐grown saline ice.” ASME J. Offshore Mech. and Arctic Engrg., 112(4), 357–363.
11.
Kuehn, G. A., and Schulson, E. M. (1994). “The mechanical properties of saline ice under uniaxial compression.” Annals of Glaciology, 19, 39–48.
12.
Kuehn, G. A., Schulson, E. M., Jones, D. E., and Zhang, J. (1993). “The compressive strength of ice cubes of different sizes.” J. Offshore Mech. and Arctic Engrg., 115, 142–148.
13.
Kujala, P., Riska, K., Varsta, P., Koskivaara, R., and Nyman, T. (1990). “Results from in situ four point bending tests with Baltic Sea ice.” Proc., 10th IAHR Ice Symp., Int. Assn. of Hydraulic Research, Delt, The Netherlands, 261–278.
14.
Lee, J., Ralston, T. D., and Petrie, D. H. (1986). “Full‐thickness sea ice strength tests.” Proc., 8th IAHR Ice Symp., Delft, The Netherlands, 1, 293–306.
15.
Mulmule, S. V., Dempsey, J. P., and Adamson, R. M. (1995). “Large‐scale in‐situ ice fracture experiments, part II: modeling aspects.” Ice Mech. 1995, ASME AMD, 201, 129–146, ASME, New York, N.Y.
16.
Petrie, D. H., and Poplin, J. P. (1986). “Comparison of small‐scale and large‐scale sea ice strengths.” Proc., 8th IAHR Ice Symp., Int. Assn. of Hydraulic Research, Delft, The Netherlands, 1, 265–277.
17.
Richter‐Menge, J. A. (1991). “Confined compressive strength of horizontal first‐year sea ice samples.” ASME J. Offshore Mech. and Arctic Engrg., 113, 344–351.
18.
Richter‐Menge, J. A. (1992). “The compressive strength of frazil sea ice.” Proc., 11th IAHR Ice Symp., Int. Assn. of Hydraulic Research, Delft, The Netherlands, 2, 1065–1074.
19.
Richter‐Menge, J. A., and Jones, K. F. (1993). “The tensile strength of first‐year sea ice.” J. Glaciology, 39(133), 609–618.
20.
Sanderson, T. J. O. (1988). Ice mechanics: risks to offshore structures. Graham and Trotman, Ltd., London.
21.
Schulson, E. M., Gies, M. C., Lasonde, G. J., and Nixon, W. A. (1989). “The effect of the specimen‐platen interface on internal cracking and brittle fracture of ice under compression: high‐speed photography.” J. Glaciology, 35(121), 378–382.
22.
Schulson, E. M., and Nickolayev, O. Y. (1995). “Failure of columnar saline ice under biaxial compression: failure envelopes and the brittle to ductile transition.” J. Geophys. Res., 100(B11), 22383–22400.
23.
Shapiro, L. H., and Weeks, W. F. (1993). “The influence of crystallographic and structural properties on the flexural strength of small sea ice beams.” Proc., 1st Joint Mech. Meeting of ASME, ASCE, and SES, J. P. Dempsey, Z. P. Baant, Y. D. S. Rajapakse, and S. S. Sunder, eds., ASME, New York, N.Y., 177–188.
24.
Sinha, N. K. (1981). “Comparative study of ice strength data.” Proc., IAHR Int. Symp. on Ice, Int. Assn. of Hydraulic Research, Delft, The Netherlands, II, 581–595.
25.
Sinha, N. K., and Frederking, R. M. W. (1979). “Effect of test system stiffness on strength of ice.” Proc., 5th Int. Conf. on Port and Oc. Engrg. under Arctic Conditions, Inst. of Technology, Trondheim, Norway, 1, 708–717.
26.
Smith, T. R., and Schulson, E. M. (1994). “Brittle compressive failure of salt‐water ice columnar ice under biaxial loading.” J. Glaciology, 40, 265–276.
27.
Sui, J., Li, F., Li, Z., Zhang, M., and Yu, Y. (1988). “Study of the flexural strength and elastic modulus of sea ice in the Bohai Sea.” Proc., 9th Int. Conf. on Port and Oc. Engrg. under Arctic Conditions, W. M. Sackinger and M. O. Jeffries, eds., Univ. of Alaska, Geophys. Inst., Fairbanks, Alaska, 1, 39–44.
28.
Timco, G. W., and Frederking, R. M. W. (1986). “Confined compression tests: outlining the failure envelope of columnar sea ice.” Cold Regions Sci. and Technol., 12, 13–28.
29.
Timco, G. W., and Frederking, R. M. W. (1990). “Compressive strength of sea ice sheets.” Cold Regions Sci. and Technol., 17, 227–240.
30.
Tucker, W. B. III, and Perovich, D. K. (1992). “Stress measurements in drifting pack ice.” Cold Regions Sci. and Technol., 20, 119–139.
31.
Williams, F. M., and Parsons, B. L. (1994). “Size effect in the flexural strength of ice.” Proc., ASME 13th Int. Conf. on Offshore Mech. and Arctic Engrg., IV, 15–22, ASME, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 ASCE.
History
Published online: Mar 1, 1997
Published in print: Mar 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.