Three-Dimensional Modeling of the Ruwais Coastal Area of United Arab Emirates
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 132, Issue 6
Abstract
The coastal flow pattern around a coastal industrial compound in United Arab Emirates has been studied using a three-dimensional hydrodynamic model. The study area is and is partially sheltered from the open sea by salt marshes and islands. Such configuration increases the risk of marine pollution near the industrial site. The region is ecologically diversified and therefore understanding the physical dynamics of the area is important for any assessment work on the impact of industrial and port operations. The utilized model has a size of and employs a curvilinear sigma grid system. The setup is nested inside a regional model that covered the entire Arabian Gulf. A – module estimates the depth variation of the turbulence field. The model is calibrated against the water level and current data. A sensitivity analysis is done for different wind conditions. The results show that a mean current is developed due to tidal action in the deeper section of the coastal basin. Dominant winds develop eastward coastal currents. The daily mean water level of the area has dropped during spring tide. A tracer simulation study shows that the tracer field oscillates between east and west in conjunction with the neap and spring tides with northward net displacement.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is conducted during a research project sponsored by the Japan Cooperation Center, Petroleum (JCCP) in the United Arab Emirates University. The writers would like to acknowledge the great support offered from TAKREER and ADPOC from UAEU-ADNOC during the marine surveys.
References
Blain, C. A. (1999). “Modeling three dimensional, thermohaline-driven circulation in the Arabian Gulf.” Proc., 6th Int. Conf. on Estuarine and Coastal Modeling, La.
Chao, S-Y., Kao, T. W., and Al-Hajri, K. R. (1992). “A numerical investigation of circulation in the Arabian Gulf.” J. Geophys. Res., [Oceans], 97(C7), 11219–11236.
Elshorbagy, W., Azam, M. H., and Karim, M. A. (2002). “Hydrodynamic modeling of the southern Arabian Gulf.” Proc., HYDROSOFT2002, 9th Int. Conf. on Hydraulic Modeling, Wessex Inst. of Technology, Montreal.
Elshorbagy, W., Azam, M. H., and Nakata, K. (2004). “Temperature-salinity field of the shallow shelf of southern Arabian Gulf.” Continental Shelf Journal, submitted.
Elshorbagy, W., Azam, M. H., and Taguchi, K. (2006). “Hydrodynamic characterization and modeling of the Arabian Gulf.” J. Waterway, Port, Coastal, Ocean Eng., 132 (1), 47–56.
Fischer, H. B. (1981). Transport models for inland and coastal waters, Academic, New York.
Hibma, A., de Vriend, H. J., and Stive, M. J. F. (2003). “Numerical modeling of shoal pattern formation in well-mixed elongated estuaries.” Estuarine Coastal Shelf Sci., 57, 981–991.
Hughes, P., and Hunter, J. R. (1979). “Physical oceanography and numerical modeling of the Kuwait action plan region.” Rep. No. MARINE, 278, UNESCO Division of Marine Sciences.
Lardner, R. W., Al-Rabeh, W., Gunay, N., Hossain, M., Reynolds, R. M., and Lehr, W. J. (1993). “Computation of residual flow in the Gulf using the Mt. Mitchell data and the KFUPM/RI hydrodynamic model.” Mar. Pollution Bull., 27, 61–70.
Lardner, R. W., Lehr, W. J., Fraga, R. J., and Sarhan, M. A. (1987). “Residual circulation in the Arabian Gulf. I: Density-driven flow.” Arabian J. Sci. Eng., 12(3), 341–354.
Militello, A. (1999). “Hydrodynamic modeling of a sea breeze dominated shallow embayment, Baffin Bay, Texas.” Proc., 6th Int. Conf. on Estuarine and Coastal Modeling, La.
Perrone, T. J. (1981). “Winter shamal in the Persian Gulf.” Technical Rep. 79-06, Naval Env. Prediction Res. Facility, Monterey, Canada.
Reynolds, M. R. (1993). “Physical oceanography of the Gulf, Strait of Hormuz, and Gulf of Oman—Results from the Mt. Mitchell expedition.” Mar. Pollution Bull., 27, 35–39.
Rodi, W. (1987). “Turbulence models and their applications in hydraulics, state of the art paper article surl’etat de connaisance.” Proc., IAHR-Section of Fundamentals of Division II: Experimental and Mathematical Fluid Dynamics, The Netherlands.
Roelvink, J. A., and van Banning, G. K. F. M. (1994). “Design and development of DELFT3D and application to coastal morphodynamics.” Proc., Hydroinformatics ’94, A. Verwey, A. W. Minns, V. Babovic, and M. Maksimovic, eds., Rotterdam, The Netherlands, 451–456.
Sweers, H. E. (1976). “A monogram to estimate the heat exchange coefficient at the air-water interface as a function of wind speed and temperature, a critical survey of some literature.” J. Hydrol., 30.
UNEP. (1999). “Overview on land based sources and activities effecting the marine environment in the ROPME sea area.” Regional Seas Rep. and Studies No. 168 http://www.gpa.unep.org/documents/technical/rseas_reports/168-eng.pdf .
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Mar 10, 2004
Accepted: Jan 11, 2005
Published online: Nov 1, 2006
Published in print: Nov 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.