Large-Scale Experiments on Pore Pressure Generation underneath a Caisson Breakwater
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 132, Issue 4
Abstract
Results of large-scale model experiments in a wave flume are discussed. These experiments are concerned with the study of the generation of transient or instantaneous and residual pore pressure in a seabed beneath a caisson breakwater subjected to both pulsating and breaking wave loads. The simulated seabed and drainage conditions correspond to those encountered in a loose sand bed with thin clay or silt layers. Even under such unfavorable conditions total liquefaction due to residual pore pressures could not occur during the experiments. It is shown that the residual pore pressure is essentially generated by the caisson motions due to breaking wave loads and that they are closely related to residual soil deformations, which may lead to the failure of the breakwater.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
The writers would like to thank the EU for the support of this study within the LIMAS-Project (Liquefaction Around Marine Structures, Contract No. EVK3-CT-2000-00038).
References
Chaney, R. C., and Fang, H. Y. (1991). “Liquefaction in the coastal environment: An analysis of case histories.” Mar. Geotech., 10, 347–370.
De Groot, M. B., et al. (2006a). “Physics of liquefaction phenomena around marine structures.” J. Waterw., Port, Coastal, Ocean Eng., 132(4), 227–243.
De Groot, M. B., Kudella, M., Meijers, P., and Oumeraci, H. (2006b). “Liquefaction phenomena underneath marine gravity structures subjected to wave loads.” J. Waterw., Port, Coastal, Ocean Eng., 132(4), 325–335.
De Groot, M. B., and Meijers, P. (2004). “Wave induced liquefaction underneath gravity structures.” Proc. Int. Conf. on Cyclic Behaviour of Soils and Liquefaction Phenomena, Bochum, Germany, Balkema, Rotterdam, 399–406.
Ischen, M. (2003). “Development of pore water pressure in a sand bed under transient water waves.” Master thesis, Technical Univ. Braunscheig, Leichtweiss-Institut.
Ishihara, K. (1993). “Liquefaction and flow failure during earthquakes.” Geotechnique, 43(3), 351–415.
Kudella, M., and Oumeraci, H. (2004a). “Wave-induced pore pressure in the sandy seabed underneath a caisson breakwater—Experimental results of large-scale model tests.” Technical Rep., Technical Univ. of Braunschweig, Leichtweiss-Institute.
Kudella, M., and Oumeraci, H. (2004b). “Wave-induced transient and residual pore pressure in the sand bed underneath a caisson breakwater—Processes leading to liquefaction.” Proc., Int. Conf. on Cyclic Behaviour of Soils and Liquefaction Phenomena, Bochum, Germany, Balkema, Rotterdam, 411–424.
Okusa, S. (1985). “Wave induced stress in unsaturated marine sediments.” Geotechnique, 35(4), 517–532.
Oumeraci, H. (1994). “Review and analysis of vertical breakwater failures: Lessons learned.” Coastal Eng., 22(1/2), 3–29.
Oumeraci, H., et al. (2001). Probabilistic design tools for vertical breakwaters, Balkema, Lisse, The Netherlands.
Pietruszczak, S., and Pande, G. N. (1996). “Constitutive relations for partially saturated soils containing gas inclusions.” J. Geotech. Eng., 122(1), 50–59.
Puech, A., and Foray, P. (2002). “Refined model for interpreting shallow penetration CPTs in sand.” Proc., Offshore Technology Conf., Houston, (published as CD-ROM).
Zen, K., Umehara, Y., and Finn, W. D. L. (1986). “A case study of the wave-induced liquefaction of sand layers under the damaged breakwater.” Proc., 3rd Canadian Conf. on Marine Geotechnical Engineering, St. John’s, Newfoundland, Canada, 505–519.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jun 15, 2004
Accepted: Aug 26, 2004
Published online: Jul 1, 2006
Published in print: Jul 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.