Minimization of Filling and Emptying Time for Navigation Locks
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 126, Issue 6
Abstract
A mathematical model is developed to simulate the filling/emptying of navigation locks and to compute the stress on mooring lines of barges during lockage. The model, verified for different filling and emptying systems (end-filling systems with valves-in-gate or loop culverts and wall culverts with side-ports), reproduces satisfactorily the hydraulic transient generated in the lock chamber and the hawser force. A procedure is proposed to design the optimal valve operation for end-filling systems, which gives the minimum lockage time, keeping the hawser force below the admissible value. It is concluded that valving at a progressively increasing rate diminishes the lockage time in comparison to a valve operated at a constant rate.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ables, J. H. ( 1978). “Filling and emptying system, New Ship Lock, Mississippi River—Gulf Outlet, Louisiana, hydraulic model investigation.” Tech. Rep. H-7816, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
2.
Cabelka, J., and Gabriel, P. ( 1985). “Inland waterways.” Developments in hydraulic engineering, Vol. 3, P. Novak, ed., Elsevier Applied Science, London.
3.
Cankaya, I., and Peyton Jones, J. C. ( 1999). “Lurching phenomenon and mean roll response of a ship in regular and irregular beam seas.” Proc., IASTED Int. Conf. on Modelling and Simulation, M. H. Hamza, ed., IASTED, Anaheim, Calif., 386–389.
4.
Crandall, S. H. ( 1956). Engineering analysis: A survey of numerical procedures, McGraw-Hill, New York.
5.
Cunge, J. A., Holly, F. M., and Verwey, A. ( 1980). Practical aspects of computational river hydraulics, Pitman Publishing Ltd., London.
6.
Gallati, M., and Natale, L. ( 1977). “A numerical model of the hydrodynamic transient in navigation locks.” Proc., 17th IAHR Congr., IAHR, 319–325.
7.
Himmelblau, D. L. ( 1972). Applied nonlinear problems, McGraw-Hill, New York.
8.
Hydraulic design of navigation locks. (1995). Manual EM 1110-2-1604, U.S. Army Corps of Engineers, Washington, D.C.
9.
Kalkwijk, J. P. T. ( 1973). “Hydrodynamic forces and ship motions induced by surges in a navigation lock.” Rep. No. 73-1, Delft University of Technology, Delft, The Netherlands.
10.
Kolkman, P. A. ( 1973). “Low head navigation locks door filling and emptying systems developed by hydraulic investigations.” Publ. No. 111, Delft Hydraulics Laboratory, Delft, The Netherlands.
11.
McCartney, B. L. (1986). “Inland waterway navigation project design.”J. Wtrwy., Port, Coast., and Oc. Engrg., ASCE, 112(6), 645–657.
12.
McCartney, B. L., George, J., Lee, B. K., Lindgren, M., and Neilson, F. ( 1998). “Inland navigation: Locks, dams, and channels.” ASCE Manuals and Reports on Engineering Practice No. 94, ASCE, Reston, Va.
13.
McNown, J. S. (1976). “Sinkage and resistance for ships in channels.”J. Wtrwy., Harb., and Coast. Engrg. Div., ASCE, 102(3), 287–300.
14.
Miller, D. S. ( 1971). Internal flow, a guide to losses in pipe and duct systems, British Hydromechanics Research Association, Belford, U.K.
15.
Natale, L., and Savi, F. ( 1994). “Dynamics of barges in navigation locks.” Proc., IASTED Int. Conf. on Modelling and Simulation, M. H. Hamza, ed., IASTED, Anaheim, Calif., 237–240.
16.
Permanent International Association of Navigation Congresses (PIANC). ( 1986). “Final report of the International Commission for the study of locks.” Bull. 55, Brussels.
17.
Permanent International Association of Navigation Congresses (PIANC). ( 1990). “Normalisation du Dimensionnement des Voies Navigables.” Supplement Bull. 71, Brussels (in French).
18.
Rich, G. R. ( 1963). Hydraulic transients, Dover, New York.
19.
Stockstill, R. L., Neilson, F. M., and Zitta, V. L. (1991). “Hydraulic calculations for flow in lock manifolds.”J. Hydr. Engrg., ASCE, 117(8), 1026–1041.
20.
Timoshenko, S. ( 1955). Vibration problems in engineering, Van Nostrand Co. Inc., Princeton, N.J.
21.
Zong, M., and Ding, X. ( 1990). “Hydraulic design experiences and practices of navigation locks in China.” AIPCN Bull. No. 69, Brussels, 81–92.
Information & Authors
Information
Published In
History
Received: Jun 8, 1999
Published online: Dec 1, 2000
Published in print: Dec 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.