Flexible Membrane Wave Barrier. II: Floating/Submerged Buoy-Membrane System
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 123, Issue 2
Abstract
The interaction of water waves with a tensioned, inextensible, vertical flexible membrane hinged at the sea floor and attached to a solid cylindrical buoy at its top, was investigated in the context of two-dimensional linear wave-body interaction theory. Both submerged and surface-piercing buoy/membrane wave barriers were considered. A two-domain boundary element program was developed based on a discrete-membrane dynamic model and simple-source distribution over the entire fluid boundaries. Since the boundary condition on the membrane is not known in advance, the membrane motion and velocity potentials were solved simultaneously. The accuracy and convergence of the developed program were checked using the energy-conservation formula. The numerical results were further verified by checking several limiting cases and through comparison with the experiments conducted in a 2D wave tank. Using the developed computer program, the performance of surface-piercing or submerged buoy/membrane wave barriers was tested with varying buoy radius and draft, water depth, membrane length, and mooring-line stiffness. The performance of the three different mooring types was also investigated. From our numerical examples, it can be concluded that the buoy/membrane wave barrier can function as a very effective breakwater if it is properly designed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abul-Azm, A. G.(1994). “Wave diffraction by double flexible breakwaters.”J. Appl. Oc. Res., 16, 87–99.
2.
Au, M. C., and Brebbia, C. A.(1982). “Numerical prediction of wave forces using the boundary element method.”Appl. Math. Modeling, 6, 218–228.
3.
Broderick, L. L., and Jenkins, C. H.(1993). “Experimental investigation of fluid-filled membrane breakwaters.”J. Wtrwy., Port, Coast., and Oc. Engrg., ASCE, 119(6), 639–656.
4.
Evans, D. V., and Linton, C. M.(1991). “Submerged floating breakwaters.”J. Offshore Mech. and Arctic Engrg., 113, 205–210.
5.
Hagan, C. L., and Kim, M. H. (1994). “A theoretical/experimental study of a perforated wall wave absorber.” MS Thesis, Texas A&M University, College Station, Tex.
6.
Huygens, M., Verhoeven, R., Wachter, D. D., Himpe, J., Buyck, S., and Wens, F. (1994). “Underwater screens for shore protection.”Proc., Int. Symp. Waves-Phys. and Numer. Modeling, 1503–1512.
7.
Ijima, T., Chou, C. R., and Yoshida, A. (1978). “Method of analyses for two-dimensional water wave problems.”Proc., 15th Conf. on Coast. Engrg., 2717–2737.
8.
Isaacson, M.(1991). “Measurement of regular wave reflection.”J. Wtrwy., Port, Coast., and Oc. Engrg., ASCE, 117, 553–569.
9.
Isaacson, M., Whiteside, N., Gardiner, R., and Hay, D. (1994). “Modelling of a circular section floating breakwater.”Proc., Int. Symp. Waves-Phys. and Numer. Modeling.
10.
Kim, M. H., and Kee, S. T. (1994). “Flexible membrane wave barrier.”Proc., 9th Int. Workshop Water Waves and Floating Bodies, 109–113.
11.
Kim, M. H. and Kee(1996). “Flexible membrane wave barrier. I: Analytic and numerical solutions.”J. Wtrwy., Port, Coast., and Oc. Engrg., ASCE, 122(1), 46–53.
12.
Lee, J. F., and Chen, C. J.(1990). “Wave interaction with hinged flexible breakwater.”J. Hydr. Res., Delft, The Netherlands, 28, 283–295.
13.
Newman, J. N.(1994). “Wave effects on deformable bodies.”J. Appl. Oc. Res., 16, 47–59.
14.
Ohyama, T., Tanaka, M., Kiyokawa, T., Uda, T., and Murai, Y.(1989). “Transmission and reflection characteristics of waves over a submerged flexible mound.”Coast. Engrg. in Japan, 32(1), 53–68.
15.
Sawaragi, T., Aoki, S., and Yasui, A. (1989). “Tensions on silt curtains in currents and waves.”Proc., Offshore Mech. and Arctic Engrg. Conf., Hague, 13–21.
16.
Seymour, R. J., and Hanes, D. M.(1979). “Performance analysis of tethered float breakwater.”J. Wtrwy., Port, Coast., and Oc. Engrg., ASCE, 105(3), 265–281.
17.
Sollitt, C. K., Lee, C. P., McDougal, W. G., and Perry, T. J.(1986). “Mechanically coupled buoyant flaps: theory and experiment.”Proc., 20th Coast. Engrg. Conf., 3, 2445–2459.
18.
Thompson, G. O., Sollitt, C. K., McDougal, W. G. and Bender, W. R. (1992). “Flexible membrane wave barrier.”Proc., ASCE Conf. Oc. V, ASCE, New York, N.Y., 129–148.
19.
Wang, K. H., and Ren, X.(1993). “Water waves on a flexible and porous breakwater.”J. Engrg. Mech., ASCE, 119, 1025–1048.
20.
Williams, A. N., Geiger, P. T., and McDougal, W. G.(1991). “Flexible floating breakwater.”J. Wtrwy., Port, Coast., and Oc. Engrg., ASCE, 117(5), 429–450.
21.
Williams, A. N., Geiger, P. T., and McDougal, W. G.(1992). “A submerged compliant breakwater.”J. Offshore Mech. and Arctic Engrg., 114, 83–90.
22.
Zhao, R. (1994). “Hydroelastic analyses of a floating flexible body in waves.”Proc., 9th Int. Workshop Water Waves and Floating Bodies, Japan, 241–244.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Mar 1, 1997
Published in print: Mar 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.