Simulation of Operations and Water Quality Performance of Reservoir Multilevel Intake Configurations
Publication: Journal of Water Resources Planning and Management
Volume 133, Issue 1
Abstract
A predictive framework is developed and applied to evaluate benefits of multilevel intake configurations in managing temperature and turbidity in water withdrawn from a water supply reservoir, Schoharie Reservoir, New York, that presently, has a single level intake. High values of occur in late summer for the reservoir in major drawdown years, and high levels occur irregularly following runoff events. The framework, composed of a tested two-dimensional water quality model for temperature and turbidity linked to a heuristic optimization algorithm, supports automated selection of intake levels to meet user-specified operational goals. Multilevel intake configurations are demonstrated to avoid exceedences of a State discharge standard for for the conditions of a critical historic year, through a strategy of withdrawal of warmer upper layers through early summer and subsequent blending with cooler lower layers as necessary, at both the existing intake site and a deeper down-reservoir location. The adequacy of the existing intake site is challenged for this critical year if a conservative lower standard is set to accommodate the effects of model uncertainty. Amelioration of high values is demonstrated for multilevel intake configurations. The operation of a multilevel intake facility in the reservoir would result in a shallower epilimnion and metalimnion in many years, and summer surface temperatures would be lower in major drawdown years. The modeling approaches used in this analysis are generally applicable to support evaluations of multilevel intake configurations for other water supply lakes and reservoirs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funding of this study was provided by the New York City Department of Environmental Protection. This is contribution No. 242 of the Upstate Freshwater Institute.
References
Akiyama, J., and Stefan, H. G. (1984). “Plunging flow into a reservoir: Theory.” J. Hydraul. Eng., 110(4), 484–499.
Burns, N. M. (1995). “Using hypolimnetic dissolved oxygen depletion rates for monitoring lakes.” N.Z.J. Mar. Freshwater Res., 29, 1–11.
Chung, S. W., and Gu, R. (1998). “Two-dimensional simulations of contaminant currents in stratified reservoir.” J. Hydraul. Eng., 124(7), 704–711.
Cole, T. M., and Wells, S. A. (2002). “CE-QUAL-W2: A two-dimensional, laterally averaged, hydrodynamic and water quality model, version 3.1.” Instruction Rep. EL-2002-1, U.S. Army Engineering and Research Development Center, Vicksburg, Miss.
Edinger, J. E., and Buchak, E. M. (1975). “A hydrodynamic, two-dimensional reservoir model: The computational basis.” Prepared for U.S. Army Engineer Division, Ohio River, Cincinnati.
Effler, S. W., and Owens, E. M. (1996). “Density stratification in Onondaga Lake: 1968–1994.” Lake Reservoir Manage., 12, 25–33.
Effler, S. W., Prestigiacomo, A., Peng, F., Bulygina, K. B., and Smith, D. G. (2006). “Resolution of turbidity patterns from runoff events in a water supply reservoir and the advantages of in situ beam attenuation measurements.” Lake Reservoir Manage., 22, 79–93.
Fischer, H. B., List, E. J., Imberger, J., Koh, R. C., and Brooks, N. H. (1979). Mixing in inland and coastal waters. Academic, New York.
Gannett Fleming, Hazen, and Sawyer, (2004). “Catskill turbidity control study: Phase I Final Report.” Prepared for New York City Department of Environmental Protection, Bureau of Environmental Engineering Watershed Facilities Design.
Gelda, R. K., and Effler, S. W. (2006a). “Testing and application of a two-dimensional hydrothermal model for a water supply reservoir: Implications of sedimentation.” J. Environ. Eng. Sci., in press.
Gelda, R. K., and Effler, S. W. (2006b). “Modeling turbidity in a water supply reservoir: Advancements and issues.” J. Environ. Eng., in press.
Gu, R., and Chung, S. W. (1998). “Reservoir flow sensitivity to inflow and ambient parameters.” J. Water Resour. Plann. Manage., 124(3), 119–128.
Hanna, R. B., Saito, L., Bartholow, J. M., and Sandelin, J. (1999). “Results of simulated temperature control device operations on in-reservoir and discharge water temperatures using CE-QUAL-W2.” Int. J. Approx. Reason., 15, 87–102.
Longabucco, P., and Rafferty, M. R. (1998). “Analysis of material loading to Cannonsville Reservoir: Advantages of event-based sampling.” Int. J. Approx. Reason., 14, 197–212.
Martin, J. L., and McCutcheon, S. C. (1999). Hydrodynamics and transport for water quality modeling, Lewis Publishers, Boca Raton, Fla.
Martin, S. C., et al. (1985). “Dissolved oxygen model for a dynamic reservoir.” J. Environ. Eng., 111(5), 647–664.
Stefan, H., Megard, R. O., and Skoglund, T. (1976). “Wind control of algae growth in eutrophic lakes.” J. Envir. Engrg. Div., 102(6), 1210–1213.
Wetzel, R. G. (2001). Limnology: Lake and reservoir ecosystems. Academic, New York.
Young, T. C., DePinto, J. V., and Heidtke, T. M. (1988). “Factors affecting the efficiency of some estimators of fluvial total phosphorus loads.” Water Resour. Res., 24, 1535–1540.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jun 9, 2005
Accepted: Nov 21, 2005
Published online: Jan 1, 2007
Published in print: Jan 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.