Appraisal of Source Head Methods for Calculating Reliability of Water Distribution Networks
Publication: Journal of Water Resources Planning and Management
Volume 127, Issue 4
Abstract
This paper presents a new way of interpreting the results of the traditional demand-driven network analysis as an approximation to pressure-driven simulation so as to calculate the reliability of single-source networks. The approach is useful because most network modeling software packages use the demand-driven analysis approach and are incapable of simulating pressure-deficient conditions properly. The formulation draws from recent developments in pressure-driven simulation and can be used to calculate the reliability of an entire water distribution network or that of the individual demand nodes. The method herein is probabilistic in that the random nature of link failures is accounted for. Using a sample network, it is shown that the method has several advantages including simplicity and a very high computational efficiency.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bao, Y., and Mays, L. W. (1990). “Model for water distribution system reliability.”J. Hydr. Engrg., ASCE, 116(9), 1119–1137.
2.
Chandapillai, J. (1991). “Realistic simulation of water distribution system.”J. Transp. Engrg., ASCE, 117(2), 258–263.
3.
Cullinane, M. J., Lansey, K. E., and Mays, L. W. (1992). “Optimization-availability-based design of water distribution networks.”J. Hydr. Engrg., ASCE, 118(3), 420–441.
4.
Fujiwara, O., and Ganesharajah, T. ( 1993). “Reliability assessment of water supply systems with storage and distribution networks.” Water Resour. Res., 29(8), 2917–2924.
5.
Fujiwara, O., and Tung, H. D. ( 1991). “Reliability improvement for water distribution network through improving pipe size.” Water Resour. Res., 27(7), 1395–1402.
6.
Gupta, R., and Bhave, P. R. (1994). “Reliability analysis of water-distribution systems.”J. Envir. Engrg., ASCE, 120(2), 447–460.
7.
Gupta, R., and Bhave, P. R. (1996). “Comparison of methods for predicting deficient-network performance.”J. Water Resour. Plng. and Mgmt., ASCE, 122(3), 214–217.
8.
Gupta, R., and Bhave, P. R. (1997). “Closure of ‘Comparison of methods for predicting deficient-network performance.’”J. Water Resour. Plng. and Mgmt., ASCE, 123(6), 370.
9.
Jacobs, P., and Goulter, I. (1991). “Estimation of maximum cut-set size for water network failure.”J. Water Resour. Plng. and Mgmt., ASCE, 117(5), 588–605.
10.
Khomsi, D., Walters, G. A., Thorley, A. R. D., and Ouazar, D. (1996). “Reliability tester for water-distribution networks.”J. Comp. in Civ. Engrg., ASCE, 10(1), 10–19.
11.
Su, Y., Mays, L. W., Duan, N., and Lansey, K. E. (1987). “Reliability-based optimization model for water distribution systems.”J. Hydr. Engrg., ASCE, 113(12), 1539–1556.
12.
Tabesh, M. ( 1998). “Implications of the pressure dependency of outflows on data management, mathematical modelling and reliability assessment of water distribution systems.” PhD thesis, University of Liverpool, Liverpool, England.
13.
Tanyimboh, T. T. ( 1993). “An entropy-based approach to the optimum design of reliable water distribution network.” PhD thesis, University of Liverpool, Liverpool, England.
14.
Tanyimboh, T. T., and Tabesh, M. (1997). “Discussion of `Comparison of methods for predicting deficient-network performance.' by R. Gupta and P. R. Bhave.”J. Water Resour. Plng. and Mgmt., ASCE, 123(6), 369–370.
15.
Tanyimboh, T. T., and Templeman, A. B. ( 1993). “Optimum design of flexible water distribution networks.” Civ. Engrg. Sys., 10(3), 243–258.
16.
Tanyimboh, T. T., and Templeman, A. B. ( 1995). “A new method for calculating the reliability of single-source networks.” Developments in computational techniques for civil engineering, B. H. V. Topping, ed., Civil-Comp Press, Endingburgh, U.K., 1–9.
17.
Twort, A. C., Law, F. M., Crowley, F. W., and Ratnayaka, D. D. ( 1994). Water supply, Edward Arnold, London.
18.
Wager, J. M., Shamir, U., and Marks, D. H. (1988). “Water distribution reliability: Simulation methods.”J. Water Resour. Plng. and Mgmt., ASCE, 114(3), 276–294.
19.
Walters, G. A., and Knezevic, J. (1989). “Discussion of `Reliability-based optimization model for water distribution systems' by Y. Su et al.”J. Hydr. Engrg., ASCE, 115(8), 1157–1158.
20.
Xu, C., and Goulter, I. C. (1998). “Probabilistic model for water distribution reliability.”J. Water Resour. Plng. and Mgmt., ASCE, 124(4), 218–228.
21.
Yang, S.-L., Hsu, N.-S., Louie, P. W. F., and Yeh, W. W.-G. (1996). “Water distribution network reliability: Connectivity analysis.”J. Infrastruct. Sys., ASCE, 2(2), 54–64.
Information & Authors
Information
Published In
History
Received: Dec 17, 1997
Published online: Aug 1, 2001
Published in print: Aug 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.