Design of Dilution Junctions for Water Quality Control
Publication: Journal of Water Resources Planning and Management
Volume 115, Issue 6
Abstract
A method for extending the available water supply in a region is discussed. Using dilution (mixing) junctions, brackish water is mixed with higher quality water, thus producing the required water quality. For good results, the process should be controlled automatically. Typically, the controlled variables are salinity, outlet flow, water level or outlet pressure. Mixing junctions are classified, possible configurations discussed, and the most promising analyzed in detail. Steadystate equations are derived, and a microcomputer program simulating steady‐state operation is presented. This program helps to determine various design constants of the junction. For a dynamic study, a hybrid computer simulation was made, with dynamics of instrumentation simulated on an analog computer. A conclusion of this simulation is that equal‐percentage rather than linear‐control valves should be used. A cost analysis showed that lowest cost is achieved using a self‐actuated pressure or flow regulator, and single‐speed floating control for salinity. A circuit implementing single‐speed floating control, using a conventional control valve and two small solenoid valves, is described and tested by hybrid simulation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Action pak catalog. (1975). Action Instruments Co.
2.
Considine, D. (1974). Process instruments and controls handbook, 2nd Ed., McGraw‐Hill Inc., New York, N.Y., 18‐22–18‐23.
3.
Korn, G. (1962). “New dead space limiter.” Control Engrg., March, 91.
4.
Lee hydraulic inserts—Technical hydraulic handbook. (1980). Lee Company.
5.
Muckli, W., and Kraemer, W. (1972). “Reglereinstellung an nichtentkoppelten zweigroessenregelungen.” Regelungstechnik und Prozess‐Datenverarbeitung, 20(4), 155–163 (in German).
6.
Pessen, D. (1982). “Computer simulation of steady‐state flows in mixing junctions.” Research Report TME‐416, Dept. of Mech. Engrg., Technion, Haifa, Israel.
7.
Pessen, D. (1983a). “A survey of control configurations for water mixing junctions.” Research Report TME‐419, Dept. of Mech. Engrg., Technion, Haifa, Israel.
8.
Pessen, D. (1983b). “Hybrid computer simulation of type A‐30‐P mixing junction.” Research Report TME‐422, Dept. of Mech. Engrg., Technion, Haifa, Israel.
9.
Pessen, D. (1984a). “Mixing junctions with single‐speed floating control.” Research Report TME 422‐A, Dept. of Mech. Engrg., Technion, Haifa, Israel.
10.
Pessen, D. (1984b). “Price comparison between various mixing‐junction control methods.” Research Report 419‐A, Dept. of Mech. Engrg., Technion, Haifa, Israel.
11.
Pessen, D., Reike, M., and Sinai, G. (1986). “Design and simulation of watermixing junctions in irrigation systems.” Int. J. Model. and Simul., 6(1), 32–38.
12.
Pessen, D. (1988). “Upside‐down hybrid simulation.” Proc. IASTED Int. Symp. On Modeling, Ident. and Cont., Grindelwald, Switzerland, 5–7.
13.
Reike, M., et al. (1987). “Hierarchical control of multi‐quality water distribution systems.” Comput. and Elect. in Agr., 2, 1–13.
14.
Shinskey, F. G. (1967). Process‐control systems. McGraw‐Hill Inc., New York, N.Y.
15.
Sinai, G., Jury, W. A., and Stolzy, L. H. (1985). “Simultaneous control of flows and salinity in irrigation networks.” Irrig. Sci., 6, 179–190.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Nov 1, 1989
Published in print: Nov 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.