Predicting Moisture-Dependent Resilient Modulus of Cohesive Soils Using Soil Suction Concept
This article has a reply.
VIEW THE REPLYPublication: Journal of Transportation Engineering
Volume 134, Issue 1
Abstract
The resilient modulus of the materials used in various pavement layers has been used extensively as an important material property in structural design of pavement. The state of stress and moisture content of cohesive soils have been observed to exert significant effects on the measured resilient modulus. Since the moisture content in the cohesive subgrade soils underneath the pavement undergoes seasonal changes due to infiltration of precipitations and since characterization of moisture and stress dependent resilient modulus of cohesive soils is a demanding and tedious task, there is a practical need for a predictive equation for the resilient modulus as a function of stress states and moisture content. This paper presents a new predictive equation for the resilient modulus of cohesive soils using the concept of soil suction. The accuracy of the proposed model is validated against experimental data of A-4 and A-6 soils conducted by the writers as well as by other data available in the literature. The proposed model provides advantages over the existing predictive equations by reducing the number of tests and soil specimens needed for determining the regression coefficients in the equation. The proposed predictive equation compares well with the empirical equation in the new mechanistic empirical pavement design guide (MEPDG) in predicting the effect of moisture content variation on the resilient modulus. The proposed model provides an advantage over the MEPDG empirical equation in taking into account the effects of both the stress state and moisture content on the resilient modulus of cohesive soils.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1986). Guide for design of pavement structures, Washington, D.C.
AASHTO. (2003). “Determining the resilient modulus of soils and aggregate materials.” T307–99, Standard specifications for transportation materials and methods of sampling and testing, Washington, D.C.
ASTM. (2000). “Standard test method for measurement of soil potential (suction) using filter paper.” Annual book of ASTM standards, ASTM D 5298-94, Vol. 4.08, D-18 Committee on Soils and Rock, West Conshohocken, Pa., 1082–1087.
Bishop, A. W. (1959). “The principle of effective stress.” Tek. Ukeblad, 106(39), 859–863.
Brown, S. F., and Pappin, J. W. (1981). “Analysis of pavements with granular bases, layered pavement systems.” Transportation Research Record. 810, Transportation Research Board, Washington, D.C., 17–23.
Bulut, R., Lytton, R. L., and Wray, W. K. (2001). “Soil suction measurements by filter paper.” Expansive clay soils and vegetative influence on shallow foundations, geotechnical special publication 115, ASCE, 243–279.
Burczyk, J. M., Ksaibati, K., Anderson-Sprecher, R., and Farrer, M. J. (1994). “Factors influencing determination of a subgrade resilient modulus value.” Transportation Research Record. 1462, Transportation Research Board, Washington, D.C., 72–78.
Carmichael, R. F., and Stuart, E. (1986). “Predicting resilient modulus: A study to determine the mechanical properties of subgrade soils.” Transportation Research Record. 1043, Transportation Research Board, Washington, D.C., 145–148.
Ceratti, A., Gehling, W., and Nunez, W. P. (2004). “Seasonal variations of a subgrade soil resilient modulus in southern Brazil.” Transportation Research Record. 1874, Transportation Research Board, Washington, D.C., 165–173.
Dai, S., and Zollars, J. (2002). “Resilient modulus of Minnesota Road Research Project subgrade soil.” Transportation Research Record. 1786, Transportation Research Board, Washington, D.C., 20–28.
Drumm, E. C., Reeves, J. S., Madgett, M. R., and Trolinger, W. D. (1997). “Subgrade resilient modulus correction for saturation effects.” J. Geotech. Geoenviron. Eng., 123(7), 663–670.
Edris, E. V., Jr., and Lytton, R. L. (1976). “Dynamic properties of subgrade soils including environmental effects.” Texas Transportation Institute Rep. No. TTI-2-18-74-164-3, Texas A&M Univ., College Station, Tex.
Elfino, M. K., and Davidson, J. L. (1989). “Modeling field moisture in resilient modulus testing.” Geotechnical Special Publication 24, ASCE, 31–51.
Fredlund, D. G., Bergan, A. T., and Wong, P. K. (1977). “Relation between resilient modulus and stress research conditions for cohesive subgrade soils.” Transportation Research Record. 642, Transportation Research Board, Washington, D.C., 73–81.
Fredlund, D. G., and Rahardjo, H. (1993). Soil mechanics for unsaturated soils, Wiley, New York.
Fredlund, D. G., and Xing, A. (1994). “Equation for soil water characteristic curve.” Can. Geotech. J., 31, 521–532.
Fredlund, D. G., Xing, A., Fredlund, M., and Barbour, S. L. (1995). “The relationship of the unsaturated shear strength to the soil-water characteristic curve.” Can. Geotech. J., 32, 440–448.
George, K. P. (2004). “Prediction of resilient modulus from soil index properties.” Rep. No. FHWA/MS-DOT-RD-04-172, Federal Highway Administration, U.S. Department of Transportation, Washington, D.C.
Heath, A. C., Pestana, J. M., Harvey, J. T., and Bejerano, M. O. (2004). “Normalizing behavior of unsaturated granular pavement materials.” J. Geotech. Geoenviron. Eng., 130(9), 896–904.
Khalili, N., and Khabbaz, M. H. (1998). “A unique relationship for for the determination of the shear strength of unsaturated soils.” Geotechnique, 48(2), 1–7.
Khoury, N. N., Musharraf, Z. M., Nevels, J. B., and Mann, J. (2003). “Effect of soil suction on resilient modulus of subgrade soil using the filter paper technique.” Proc., Transportation Research Board(CD-ROM), National Research Council, Washington, D.C.
Khoury, N. N., and Zaman, M. (2004). “Correlation among resilient modulus, moisture variation, and soil suction for subgrade soils.” Transportation Research Record. 1874, Transportation Research Board, Washington, D.C., 99–107.
Larson, G., and Dempsey, B. J. (1997). “Integrated climatic model, Version 2.0.” Rep. No. DTFA MN/DOT 72114, Univ. of Illinois at Urbana-Champaign and Newmark Civil Engineering Laboratory, Urbana, Ill.
Lee, W. J., Bohra, N. C., Altschaeffl, A. G., and White, T. D. (1995). “Resilient modulus of cohesive soils and the effect of freeze-thaw.” Can. Geotech. J., 32, 559–568.
Lee, W., Bohra, N. C., Altschaeffl, A. G., and White, T. D. (1997). “Resilient modulus of cohesive soils.” J. Geotech. Geoenviron. Eng., 123(2), 131–136.
Mohammad, L. N., Huang, B., Puppala, A., and Alen, A. (1999). “A regression model for resilient modulus of subgrade soils.” Proc., 78th Annual Meeting of the Transportation Research Board, Washington, D.C.
Mohammad, L. N., Puppala, A. J., and Alavilli, P. (1996). “Resilient modulus of laboratory compacted subgrade soils.” Transportation Research Record. 1504, Transportation Research Board, Washington, D.C., 87–102.
Moossazadeh, J., and Witczak, M. W. (1981). “Prediction of subgrade moduli for soil that exhibits nonlinear behavior.” Transportation Research Record. 810, Transportation Research Board, Washington, D.C., 9–17.
National Cooperative Highway Research Program (NCHRP). (2003). “Procedure for resilient modulus of unstabilized aggregate base and subgrade materials.” Project No. 1-28A, Appendix A, NCHRP Transportation Research Board, Washington, D.C.
National Cooperative Highway Research Program (NCHRP). (2004). “Development of the 2002 guide for the design of new and rehabilitated pavement structures.” Project No. 1-37A, NCHRP Transportation Research Board, Washington, D.C.
Pezo, R. F., Claros, G., Hudson, W. R., and Stoke, K. H. (1992). “Development of a reliable resilient modulus test for subgrade and non granular subbase materials for use in routine pavement design.” Research Rep. No. 1177-4f, Center for Transportation Research, Univ. of Texas, Austin, Tex.
Santha, B. L. (1994). “Resilient modulus of subgrade soils: Comparison of two constitutive equations.” Transportation Research Record. 1462, Transportation Research Board, Washington, D.C., 79–90.
Sauer, E. K., and Monismith, C. L. (1968). “Influence of soil suction on behavior of a glacial till subjected to repeated loading.” Highw. Res. Rec., 215, 8–23.
Seed, H. B., Mitry, F. G., Monismith, C. L., and Chan, C. K. (1967). “Prediction of pavement deflection from laboratory repeated load tests.” NCHRP Rep. No. 35, Washington, D.C.
Thadkamalla, G. B., and George, K. P. (1995). “Characterization of subgrade soils at simulated field moisture.” Transportation Research Record. 1481, Transportation Research Board, Washington, D.C., 21–27.
Thompson, M. R., and Robnett, Q. L. (1979). “Resilient properties of subgrade soils.” Transp. Engrg. J., 105, (No. 1), 71–89.
Uzan, J. (1998). “Characterization of clayey subgrade materials for mechanistic design of flexible pavements.” Transportation Research Record. 1629, Transportation Research Board, Washington, D.C., 188–196.
Vanapalli, S. K., Pufahl, D. E., and Fredlund, D. G. (1999). “The influence of soil structure and stress history on the soil-water characteristic of a compacted till.” Geotechnique, 49(2), 143–159.
Von Quintus, H., and Killingsworth, B. (1998). “Analyses relating to pavement material characterizations and their effects on pavement performance.” Rep. No. FHWA RD- 97-085, U.S. Department of Transportation, Federal Highway Administration, Washington, D.C.
Witczak, M., and Uzan, J. (1988). “The universal airport design system, Report I of IV. Granular material characterization.” Rep. to Department of Civil Engineering, Univ. of Maryland, College Park, Md.
Wolfe, W. E., and Butalia, T. S. (2004). “Continued monitoring of SHRP pavement instrumentation including soil suction and relationship with resilient modulus.” Rep. No. FHWA/OH-2004/007, U.S. Department of Transportation, Federal Highway Administration, Washington, D.C.
Yang, R. R., Huang, W. H., and Tai, Y. T. (2005). “Variation of resilient modulus with soil suction for compacted subgrade soils.” Transportation Research Record. 1913, Transportation Research Board, Washington, D.C., 99–106.
Zapata, C. E. (1999). “Uncertainty in soil-water characteristic curve and impacts on unsaturated shear strength predictions.” Ph.D. dissertation, Arizona State Univ., Tempe, Ariz.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 134 • Issue 1 • January 2008
Pages: 34 - 40
Copyright
© 2008 ASCE.
History
Received: Jun 13, 2006
Accepted: Jun 18, 2007
Published online: Jan 1, 2008
Published in print: Jan 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.