Rethinking Geometric Design Standards for Bike Paths
Publication: Journal of Transportation Engineering
Volume 133, Issue 9
Abstract
The “single file” and “side-by-side” travel characteristics of bicyclists and pedestrians should be considered for the determination of stopping sight distances, horizontal sightline offsets, and minimum lengths of vertical curves for bike paths. This paper describes these unique travel behaviors and classifies them into two cases (Case I and Case II) for geometric design. It presents a set of new design equations and charts that consider these two design cases and introduces design methods to supplement current AASHTO standards and guidelines. The paper then provides a practical procedure for using the new charts and equations for design of bike paths. It is recommended that the new analytical means of evaluating the effect of side-by-side riding on geometric design of bike paths should be included in the revision of the AASHTO Bike Guide for the Development of Bicycle Facilities.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The comments from Caltrans engineers who attended the training workshops on “Design of Bicycle and Pedestrian Facilities” from 2002 to 2005 significantly improved the exposition of our ideas.
References
American Association of Highway and Transportation Officials (AASHTO). (1999). Guide for the development of bicycle facilities, Washington, D.C.
California Department of Transportation (Caltrans). (2001). Chapter 1000, highway design manual, Sacramento, Calif.
California Department of Transportation (Caltrans). (2002). State transportation improvement program, Sacramento, Calif.
Do, A., Hummer, J. E., Toole, J. L., and Rouphail, N. M. (2005). “Making trail.” Public Roads, 69(1), ⟨http://www.tfhrc.gov/pubrds/05jul/02.htm⟩.
Federal Highway Administration (FHwA). (2006). Shared-use path level of service calculator—A user’s guide, Washington, D.C.
Hickerson, T. F. (1964). Route location and design, 5th Ed., McGraw-Hill, New York.
Landis, B. W., Petritsch, T. A., and Huang, H. F. (2004). “Characteristics of emerging road and trail users and their safety.” Rep. No. FHWA-HRT-04-103, Federal Highway Administration, McLean, Va.
Pein, W. (1997). “Bicyclist performance on a multiuse trail.” Transportation Research Record. 1578, Transportation Research Board, Washington, D.C., 127–131.
Petritsch, T. A. (2005). “Updating the AASHTO guide for the development of bicycle facilities” Final Rep. of National Cooperation Highway Research Program (NCHRP) 20-7, Task 187, Transportation Research Board, Washington, D.C.
Shafer, C. S., Lee, B., Turner, S., and Hughart, M. (1999). “Evaluation of bicycle and pedestrian facilities: User satisfaction and perceptions on three shared use trails in Texas” Rep. 472840-00021-1, Southwest Region Univ. Transportation Center, Texas Transportation Institute, College Station, Tex.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jan 17, 2006
Accepted: Jan 30, 2007
Published online: Sep 1, 2007
Published in print: Sep 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.