New Look at DCP Test with a Link to AASHTO SN Concept
Publication: Journal of Transportation Engineering
Volume 133, Issue 4
Abstract
The dynamic cone penetration (DCP) test has emerged as a simple but effective tool for characterizing granular pavement materials and subgrades. However, DCP data tend to be used more in the converted form, e.g., as California bearing ratio (CBR) or resilient modulus ( ) based on correlations, than on their own and are also perceived as highly variable. This paper looks into the data error and variability aspects and concludes that with reasonable care taken to control testing errors, DCP data can be treated as representative of in situ materials characteristics. The paper brings out an analogy between DCP blow rate (blow/mm penetration) for a pavement layer and the corresponding AASHTO layer coefficient. It is further shown that the DCP number (DCPN), cumulative blows required to penetrate through the pavement structure, is analogous to the AASHTO structural number (SN) as an expression of pavement structural capacity. These findings would facilitate the direct use of DCP data within AASHTO pavement design framework.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1993). “AASHTO guide for design of pavement structures.” Washington, D.C.
ASTM. (2003). “D6951-03 standard test method for use of the dynamic cone penetrometer in shallow pavement applications.” West Consohocken, Pa.
ASTM. (1999). “D1586-99 standard test method for penetration tests and split barrel sampling of soils.” West Consohocken, Pa.
Australian Standards. (1997). “AS1289.6.3.2 soil strength and consolidation tests—Determination of the penetration resistance of a soil— dynamic cone penetrometer test.” Standards Australia, Strathfield, NSW.
Austroads. (1992). “Pavement design—A guide to the structural design of road pavements.” Austroads, Sydney, Australia.
Beatty, T. L., et al. (2002). “Pavement preservation technology in France, South Africa and Australia.” Rep. No. FHWA-PL-03–001, Federal Highway Administration, Washington, D.C.
Bowles, J. E. (1997). Foundation analysis and design, McGraw-Hill, New York.
Chen, D.-H., Lin, D.-F., Liau, P.-H., and Bilyen, J. (2005). “A correlation between dynamic cone penetrometer values and pavement layer moduli.” Geotech. Test. J., 28(1), 42–49.
Chen, D.-H., Wang, J.-N., and Bilyeu, J. (2001). “Application of dynamic cone penetrometer in evaluation of base and subgrade layers.” Transportation Research Record. 1764, Transportation Research Board, Washington, D.C., 1–10.
Chen, J., Hossain, J. M., and La-Toretta, T. M. (1999) “Use of falling weight deflectometer and dynamic cone penetrometer in pavement evaluation.” Transportation Research Record. 1655, Transportation Research Board, Washington, D.C., 145–151.
Coonse, J. (1999). “Estimating California bearing ratio of cohesive piedmont residual soil using the scala dynamic cone penetrometer.” Master’s thesis, North Carolina State Univ., Raleigh, N.C.
De Beer, M. (1991). “Use of the dynamic cone penetrometer (DCP) in the design of road structures.” Geotechnics in the African Environment, Vol. 1, G. E. Blight, et al., eds., Balkema, Rotterdam, The Netherlands, 167–183.
Divinsky, M., and Livneh, M. (1999). “Probabilistic model for the analysis of dynamic cone penetrometer test values in pavement structures evaluation.” J. Test. Eval., 27–1, 7–14.
Ese, D., Myre, J., Noss, P., and Vaernes, E. (1994). “The use of dynamic cone penetrometer (DCP) for road strengthening design in Norway.” Proc., 4th Int. Conf. on Bearing Capacity of Roads and Airfields, Univ. of Minnesota, Minneapolis.
George, K. P., and Uddin, W. (2000). “Subgrade characterization for highway pavement design.” Rep. FHWA/MS-DOT-RD-00–131, Mississippi DOT, Jackson, Miss.
Harison, G. A. (1989). “In situ CBR determination by DCP testing using a laboratory-based correlation.” Aust. Road Res., 19(4), 313–317.
Johannesburg Metropolitan Municipality (2004). “Public roads and miscellaneous by-laws.” Johannesburg, South Africa.
Kleyn, E. G. (1975). “The use of the dynamic cone penetrometer (DCP).” Rep. L2/74, Transvaal Roads Department, Pretoria, South Africa.
Kumar, R. S., Reddy, K. S., Majumder, M., and Pandey, B. B. (2003). “Regression model for estimation of insitu subgrade moduli from DCP tests.” Indian Highways, 31(7), 5–19.
Lavoie, M. (2005). “Utilization d"un penetrometer dynamique automatise au Ministere des Transports.” 40e Congres annuel de l′AQTR, Association québécoise du transport et des routes (AQTR) Montreal, Quebec.
Livneh, M., and Ishai, I. (1987). “Pavement and material evaluation by a dynamic cone penetrometer.” Proc. 6th Int. Conf. on Struct. Design of Asphalt Pavements, Ann Arbor, Mich., 665–676.
Livneh, M., Ishai, I., and Livneh, N. A. (1995). “Effect of vertical confinement on dynamic cone penetrometer strength values in pavement and subgrade evaluations.” Transportation Research Record. 1473, Transportation Research Board, Washington, D.C., 1–8.
MnDOT. (1996). “Users' guide to the Minnesota cone penetrometer.” Minnesota DOT, St. Paul, Minn.
MnDOT. (2002). “Gradings and base manual.” Minnesota DOT, St. Paul, Minn.
Powell, W. D., Potter, J. F., Mayhew, H. C., and Nunn, M. E. (1984). “The structural design of bituminous roads.” Rep. LR 1132, Transport Research Laboratory, Crowthorne, U.K.
Smith, E. A. (1962). “Pile driving analysis by the wave equation.” Trans. Am. Soc. Civ. Eng., 127(1), 1145–1193.
Smith, R. B., and Pratt, D. N. (1983). “A field study of in situ California bearing ratio and dynamic cone penetrometer testing for road subgrade investigations.” Aust. Road Res., 13(4), 285–294.
Transportation Research Board (TRB). (2004). “Guide for the mechanistic-empirical design of new and rehabilitated pavement structures.” Transportation Research Board, Washington, D.C.
Transport Research Laboratory (TRL). (1993). “Overseas road note 31: A guide to the structural design of bitumen-surfaced roads in tropical and subtropical countries.” Transport Research Laboratory, Crowthorne, U.K.
Transport Research Laboratory (TRL). (1999). “Overseas road note 18: A guide to pavement evaluation and maintenance of bitumen-surfaced roads in tropical and sub-tropical countries.” Transport Research Laboratory, Crowthorne, U.K.
Webster, S. L., Grau, R. H., and Williams, T. P. (1992) “Description and application of dual mass dynamic cone penetrometer.” Instruction Rep. GL-92–3, Army Engineers Waterways Experiment Station, Vicksburg, Miss.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Dec 20, 2005
Accepted: Sep 14, 2006
Published online: Apr 1, 2007
Published in print: Apr 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.