Relating Axle Load Spectra to Truck Gross Vehicle Weights and Volumes
Publication: Journal of Transportation Engineering
Volume 133, Issue 12
Abstract
Axle load spectra have been used to develop the mechanistic-empirical pavement design guide (M-E PDG). Use of these load spectra provides a more direct and rational approach for the analysis and design of pavement structures to estimate the effects of actual traffic on pavement response and distress. However, the demand for specific truck- and axle load-related data makes the collection of axle load spectra a very complicated, costly, and labor-intensive operation. Due to limited resources available in state and local highway agencies for traffic data collection, the M-E PDG allows for various levels of traffic data collection and analysis. These levels vary from site-specific (Level 1) to regional average (Level 3) traffic load and volume data. This paper explores the possibility of extracting axle loads from truck weight and volume data and presents a practical method of modeling axle load spectra. Axle load-related data used in the analyses cover diversified geographical locations in the United States. The results show that truck weights and proportions on a highway can be used to estimate individual axle load spectra for various axle configurations. The practical implication of these results is that truck weights, which can be measured easily or estimated from existing data, can be related to the axle loads if accurate and rational models are developed for a region based on the local truck traffic characteristics and weights. Such estimates will be superior to assuming a Level 3 input for axle load spectra in the new M-E PDG.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Yagout, M. A., Mahoney, J. P., Pierce, L. M., and Hallenbeck, M. E. (2005). “Improving traffic characterization to enhance pavement design and performance: Load spectra development.” Final Research Rep. No. WA-RD 600.1, Washington State Transportation Center (TRAC), Univ. of Washington, Seattle.
Ayyub, B. M., and Richard, H. M. (2003). Probability, statistics and reliability for engineers and scientists, Chapman & Hall/CRC, New York.
Federal Highway Administration (FHwA). (2001). “Traffic monitoring guide.” FHwA-PL-01-021, ⟨http://www.fhwa.dot.gov/ohim/tmguide/index.htm⟩.
Federal Highway Administration (FHwA). (2002). “SPS traffic site evaluation–Pilots summary and lessons learned.” ⟨http://www.fhwa.dot.gov/pavement/pub-details.cfm?id=256⟩.
Fekpe, S. K., and Clayton, A. (1995). “Prediction of heavy-vehicle weight distributions.” J. Transp. Eng., 121(2), 158–168.
Fwa, T. F., Ang, B. W., Toh, H. S., and Goh, T. N. (1993). “Estimation of axle loads of heavy vehicles for pavement studies.” Transportation Research Record. 1388, Transportation Research Board, Washington, D.C., 70–79.
Haider, S. W., and Harichandran, R. S. (2006). “GVW distributions parameters for various truck classes.” ⟨http://www.egr.msu.edu/~harichan/papers/2007/axle-spectra.pdf⟩.
Hajek, J. J., Selezneva, O., Jiang, J. Y., and Mladenovic, G. (2002). “Improving the reliability of pavement loading estimates using the pavement loading guide.” Transportation Research Record. 1809, Transportation Research Board, Washington, D.C., 93–104.
Hajek, J. J., Selezneva, O. I., Mladenovic, G., and Jiang, Y. J. (2005). “Estimating cumulative traffic loads. II: Traffic data assessment and axle load projection for the sites with acceptable axle weight data, final report for phase 2.” FHWA-RD-03-094, Office of Infrastructure Research and Development, Federal Highway Administration 6300 Georgetown Pike, McLean, Va.
Haldar, A., and Mahadevan, S. (2002). Probability, reliability and statistical methods in engineering design, Wiley, New York.
Harrell, F. E. J. (2001). Regression model strategies with applications to linear models, logistic regression, and survival analysis, Springer Science+Business Media, Inc, New York.
Hong, F., and Prozzi, J. A. (2005). “A probabilistic rigid pavement failure study base on axle load spectra.” Presented at the 84th Annual Meeting of the Transportation Research Board (CD-ROM), Washington, D.C.
Huang, W., Sung, Y., and Lin, J. (2002). “Development of axle load distribution model for heavy vehicles.” Presented at the 81st Annual Meeting of the Transportation Research Board, Washington, D.C.
Kim, J. R., Titus-Glover, L., Darter, M. I., and Kumapley, R. K. (1998). “Axle load distribution characterization for mechanistic pavement design.” Transportation Research Record. 1629, Transportation Research Board, Washington, D.C., 13–28.
Larsen, D. A., and McDonnell, A.-M. H. (1999). “Second interim report on the installation and evaluation of weigh-in-motion utilizing quartz-piezo sensor technology.” Rep. No. 2306-2-99-7, Connecticut Dept. of Transportation, Newington, Conn.
M-EPDG. (2004). “Appendix AA: Traffic loading.” Final Rep.: Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures, ARA, Inc., ERES Division, Champaign, Ill.
Mohammadi, J., and Shah, N. (1992). “Statistical evaluation of truck overloads.” J. Transp. Eng., 118(5), 651–665.
National Cooperative Highway Research Program (NCHRP)-Project-1-39. (2005). “Traffic data collection, analysis, and forecasting for mechanistic pavement design.” NCHRP Rep. No. 538, Transportation Research Board, Washington, D.C.
Tam, W. O., and Quintus, H. V. (2003). “Use of long-term pavement performance data to develop traffic defaults in support of mechanistic-empirical pavement design procedures.” Transportation Research Record. 1855, Transportation Research Board, Washington, D.C., 176–182.
TechBrief. (1998). “Why does LTPP require site-specific traffic loading data?” FHWA-RD-98-103, Washington, D.C.
Timm, D. H., Tisdale, S. M., and Turochy, R. E. (2005). “Axle load spectra characterization by mixed distribution modeling.” J. Transp. Eng., 131(2), 83–88.
VTRIS. (2005). “Vehicle travel information system.” ⟨http://fhwapap07.fhwa.dot.gov/vtris/⟩.
Wu, S.-S. (1996). “Procedure to estimate loading from weigh-in-motion data.” Transportation Research Record. 1536, Transportation Research Board, Washington, D.C., 19–24.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 133 • Issue 12 • December 2007
Pages: 696 - 705
Copyright
© 2007 ASCE.
History
Received: Feb 20, 2007
Accepted: Jun 18, 2007
Published online: Dec 1, 2007
Published in print: Dec 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.