Geometric Models to Calculate Left-Turn Sight Distance for Signalized Intersections on Horizontal Curves
Publication: Journal of Transportation Engineering
Volume 132, Issue 9
Abstract
At signalized intersections where protected left turn signals are not provided, simultaneous opposing left-turn vehicles may cause insufficient sight distance for each other. There is a lack of literature presenting left-turn sight distance analysis at intersections located on curved highways. In this paper, sight distance calculation models focusing on curved-approach intersections were developed for left-turn maneuvers toward the outside of the curve and toward the inside of the curve, separately. Using those models, it was found that, for left-turn maneuvers toward the outside of the curve, opposing left-turn vehicles might cause serious sight distance problems even for a 3.7-m median. However, for a left-turn maneuver toward the inside of the curve, the curve may mitigate the sight distance problem and the median width plays a more important role in the available sight distance, especially when the curve radius is relatively large. The models and related analyses can be used to lay out intersection design or evaluate the sight distance problem of an existing intersection located on the horizontal curve to ensure safe left-turn maneuvers by drivers.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1994). A policy on geometric design of highways and streets, Washington, D.C.
AASHTO. (2001). A policy on geometric design of highways and streets, Washington, D.C.
Easa, S. M., and Ali, M. Z. A. (2005). “Modified guidelines for left-turn lane geometry at intersections.” J. Transp. Eng., 131(9), 677–688.
Easa, S. M., Dabbour, E., and Ali, M. Z. A. (2004). “Three-dimensional model for stop-control intersection sight distance.” J. Transp. Eng., 130(2), 261–270.
Harwood, D., Mason, J., and Brydia, R. (2000). “Sight distance for stop-controlled intersections based on gap acceptance.” Transportation Research Record 1701, Transportation Research Board, Washington, D.C., 32–41.
Harwood, D., Mason, J., Brydia, R., Pietrucha, M., and Gittings, G. L. (1996). “Intersection sight distance.” NCHRP 383, Transportation Research Board, National Research Council, Washington, D.C.
Joshua, S. C., and Saka, A. A. (1992). “Mitigation of sight-distance problem of unprotected left-turning traffic at intersections.” Transportation Research Record 1356, Transportation Research Board, Washington, D.C., 73–79.
McCoy, P. T., Byrd, P. S., and Pesti, G. (1999). “Pavement markings to improve opposing left-turn lane sight distance.” Final Rep. No. STPP-STWD(36)/700791.
McCoy, P. T., Navarro, U. R., and Witt, W. E. (1992). “Guidelines for offsetting opposing left-turn lanes on four-lane divided roadways.” Transportation Research Record 1356, Transportation Research Board, Washington, D.C., 28–36.
Tarawneh, M. S., and McCoy, P. T. (1996). “Effect of offset between opposing left-turn lanes on driver performance.” Transportation Research Record 1523, Transportation Research Board, Washington, D.C., 61–72.
Tarawneh, M. S., and McCoy, P. T. (1997). “Guidelines for offsetting opposing left-turn lanes on divided roadways.” Transportation Research Record 1579, Transportation Research Board, Washington, D.C., 43–52.
Yan, X., and Radwan, E. (2004). “Geometric models to calculate intersection sight distance for unprotected left-turn traffic.” Transportation Research Record 1523, Transportation Research Board, Washington, D.C., 46–53.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jan 25, 2005
Accepted: Feb 8, 2006
Published online: Sep 1, 2006
Published in print: Sep 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.