Improved Design for Vision-Based Incident Detection in Transportation Systems Using Real-Time View Transformations
Publication: Journal of Transportation Engineering
Volume 132, Issue 11
Abstract
Advances in machine vision techniques have led to algorithms and integrated systems that can be applied in transportation engineering to improve surveillance and control. Despite these advances, certain problems in the effective integration of machine-vision based systems at complex intersections and complex freeway sections still remain. These are related to increasing system performance in the identification, analysis, and detection of the traffic state in real time. This work examines the feasibility of providing transformed visual input to existing machine-vision based systems, in order to gain increased efficiency and cost effectiveness of integrated transportation systems. Two transformations are developed, homography-based transformation and panoramic image reprojection. Homography-based transformation operates on video of the road scene, provided by classical cameras, and seeks to transform any view to a top-down view. This transforms the three-dimensional problem of image analysis for, e.g., road event detection to a two-dimensional one. Panoramic image reprojection employs panoramic cameras to reduce required hardware, and the complexity and cost incurred in obtaining the desired road view. The image reprojection technique allows the reconstruction of undistorted, perspectively correct views from panoramic images in real time. Tests at sites in Spain, the United Kingdom, and Greece are performed on-line and off-line in combination with operating machine-vision based incident detection systems. Test results indicate that the two methods simplify the input provided to machine vision, and reduce the workload and amount of hardware in implementing complex machine-vision based systems for incident detection. Both modules can be integrated into incident detection systems to improve their overall efficiency and ease of application.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was performed as part of project PRIME, which was partially funded by the European Union. Participating organizations were from the U.K., Greece, Spain, Germany, and The Netherlands. Data provided by cooperating sites in these countries are gratefully acknowledged.EU
References
Argyros, A. A., Tsakiris, D. P., and Groyer, C. (2004). “Bio-mimetic centering behavior: Mobile robots with panoramic sensors.” IEEE robotics and automation magazine, special issue on panoramic robotics, IEEE, New York, 21–30.
Baillard, C., and Zisserman, A. (1999). “Automatic reconstruction of piecewise planar models from multiple views.” Proc., Computer Vision and Pattern Recognition, IEEE, New York, 559–565.
Bartoli, A., Sturm, P., and Horaud, R. (2000). “A projective framework for structure and motion recovery from two views of a piecewise planar scene.” Technical Rep. No. RR-4070, MOVI/Institut National de Recherche en Informatique et en Automatique, Sophia Antipolis, France.
Benosman, R., and Kang, S. B., eds. (2001). Panoramic vision, Springer, New York.
Blosseville, J., Morin, J., and Lochegnies, P. (1993). “Video image processing application: Automatic incident detection on freeways.” Proc., Pacific Rim Transportation and Technology Conf., ASCE, Reston, Va., 77–83.
Criminisi, A., Reid, I., and Zisserman, A. (1998). “Duality, rigidity and planar parallax.” Proc., European Conf. in Computer Vision, Springer, Berlin, 846–861.
Criminisi, A., Reid, I., and Zisserman, A. (1999). “A plane measuring device.” Image Vis. Comput., 17(8), 625–634.
Hartley, R., and Zisserman, A. (2000). Multiple view geometry in computer vision, Cambridge University Press, Cambridge, Mass.
Irani, M., Anandan, P., and Weinshall, D. (1998). “From reference frames to reference planes: Multi-view parallax geometry and applications.” Proc., European Conf. in Computer Vision, Springer, Berlin, 829–845.
Kaucic, R., Hartley, R., and Dano, N. (2001). “Plane-based projective reconstruction.” Proc., Int. Conf. in Computer Vision, Vol. I, IEEE, New York, 420–427.
Lourakis, M., and Deriche, R. (2000). “Camera self-calibration using the singular value decomposition of the fundamental matrix.” Proc., Asian Conf. in Computer Vision, Springer, Berlin, 403–408.
Lourakis, M. I. A., Argyros, A. A., and Orphanoudakis, S. C. (2002). “Plane detection in an uncalibrated image pair.” Proc., British Machine Vision Conf., Vol. 2, British Machine Vision Association, Worcs, U.K., 587–596.
Lourakis, M. I. A., Halkidis, S. T., and Orphanoudakis, S. C. (2000a). “Matching disparate views of planar surfaces using projective invariants.” Image Vis. Comput., 18(9), 673–683.
Lourakis, M. I. A., and Orphanoudakis, S. C. (1998). “Visual detection of obstacles assuming a locally planar ground.” Proc., Asian Conf. in Computer Vision, Vol. 2, Springer, Berlin, 527–534.
Lourakis, M. I. A, Tzurbakis, S. V., Argyros, A. A., and Orphanoudakis, S. C. (2000b). “Using geometric constraints for matching disparate stereo views of 3D scenes containing planes.” Proc., Int. Conf. on Pattern Recognition, International Association for Pattern Recognition, Buffalo, N.Y., 419–422.
McDonald, M., and Stephanedes, Y. J., eds. (2002). “Prediction of congestion and incidents in real time, for intelligent incident management and emergency traffic management.” Final Report PRIME IST-13036, Brussels, Belgium.
Michalopoulos, P., and Jacobson, R. (1993). “Field implementation and testing of machine vision based incident detection system.” Transportation Research Record. 1394, Transportation Research Board, Washington, D.C., 1–7.
Mohr, R., Morin, L., and Grosso, E. (1992). “Relative positioning with uncalibrated cameras.” Geometric invariance in computer vision, J. L. Mundy and A. Zisserman, eds., MIT Press, Cambridge, Mass, 440–460.
Rothwell, C. A., Zisserman, A., Forsyth, D. A., and Mundy, J. L. (1995). “Planar object recognition using protective shape representation.” Int. J. Comput. Vis., 16(1), 57–99.
Simon, G., Fitzgibbon, A., and Zisserman, A. (2000). “Markerless tracking using planar structures in the scene.” Proc., Int. Symp. on Augmented Reality, IEEE, New York, 120–128.
Stephanedes, Y. J. (2004). “Intelligent transportation systems.” The engineering handbook, 2nd Ed., R. C. Dorf, ed., CRC Press, Boca Raton, Fla. Chap. 86.
Stephanedes, Y. J., and Chassiakos, A. (1993). “Freeway incident detection through filtering.” Transportation Research Journal, 1C(2), 219–234.
Stephanedes, Y. J., and Filippi, F., eds. (1996). “Applications of advanced technologies in transportation engineering (1995).” Proc., 4th Int. Conf., ASCE, Reston, Va.
Triggs, B. (1998). “Autocalibration from planar scenes.” Proc., European Conf. in Computer Vision, Springer, Berlin, 89–105.
Van Gool, L., Proesmans, M., and Zisserman, A. (1998). “Planar homologies as a basis for grouping and recognition.” Image Vis. Comput., 16(1), 21–26.
Zelnik-Manor, L., and Irani, M. (2002). “Multiview constraints on homographies.” IEEE Trans. Pattern Anal. Mach. Intell., 24(2), 214–223.
Zoghlami, I., Faugeras, O., and Deriche, R. (1997). “Using geometric corners to build a 2D mosaic from a set of images.” Proc., Computer Vision and Pattern Recognition, IEEE, New York, 420–425.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Mar 5, 2005
Accepted: Apr 11, 2006
Published online: Nov 1, 2006
Published in print: Nov 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.