Offsetting Opposing Left-Turn Lanes for Intersections on Horizontal Curves
Publication: Journal of Transportation Engineering
Volume 131, Issue 11
Abstract
Left-turn vehicles need sufficient sight distance to decide when it is safe to turn left crossing the lane(s) used by the opposing traffic. Current AASHTO policy recommends that the adequacy of sight distance for left turns should be checked for the reason that the opposing left-turn vehicles can block a driver’s view of oncoming traffic. Previous studies developed guidelines for offsetting opposing left-turn lanes to overcome this problem. However, these guidelines are only applicable to intersections with no curvature. This paper presents a mathematical model for calculating the required minimum left-turn lane offset and the median width (to accommodate the offset), when the intersections are located on horizontal curves. The provision of required offset ensures that the left-turn vehicles have unobstructed required sight distance. An application of the model is presented for divided highways with median width of 4.88 m assuming general values of other variables. The model is translated into an Excel worksheet in which the calculations for the required minimum offset and median width can be performed for any geometric configuration (e.g., curvature of major road, number of lanes, median and lane widths of the minor and major roads, etc.). Other design factors may be also input based on field observations, including design speed along the major road and longitudinal and lateral positioning of vehicles.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
The study is supported by a Discovery Grant from the Natural Sciences and Engineering Research Council of Canada and an Ontario Graduate Studies Scholarship.
References
American Association of State Highway and Transportation Officials (AASHTO). (2001). A policy on geometric design of highway and streets, AASHTO, Washington, D.C.
Easa, S. M., and Ali, M. Z. A. (2005). “Modified guidelines for left-turn lane geometry at intersections.” J. Transp. Eng., 131(9), 677–688.
Easa, S. M., Dabbour, E., and Ali, M. Z. A. (2004). “Three-dimensional model for stop-control intersection sight distance.” J. Transp. Eng. 130(2), 261–270.
Fitzpatrick, K., Mason, J., and Harwood, D. (1990). “Comparisons of sight distance procedures for turning vehicles from a stop-controlled approach." Transportation Research Record 1385, Transportation Research Board, Washington, D.C.
Fitzpatrick, K., and Wooldridge, M. (2001). “Recent geometric design research for improved safety and operations.” NCHRP Synthesis 299, National Research Council, Transportation Research Board, Washington, D.C.
Harwood, D., Mason, J., and Brydia, R. (2000). “Sight distance for stop-controlled intersections based on gap acceptance." Transportation Research Record 1385, Transportation Research Board, Washington, D.C.
Harwood, D., Mason, J., Brydia, R., Pietrucha, M., and Grittings, G. L. (1996). “Intersection sight distance.” NCHRP Report No. 383, National Research Council, Transportation Research Board, Washington, D.C.
Joshua, S. C., and Saka, A. A. (1992). “Mitigation of sight distance problem for unprotected left-turning traffic at intersections." Transportation Research Record 1356, Transportation Research Board, Washington, D.C.
Kihlberg, K. K., and Tharp, K. J. (1968). “Accident rates as related to design elements of rural highways.” NCHRP Report No. 47, National Research Council, Transportation Research Board, Washington, D.C.
McCoy, P. T., Byrd, P. S., and Pesti, G. (1999a). “Pavement markings to improve opposing left-turn lane sight distance.” Final Rep. Nebraska Department of Roads Project No. STPP-STWD(36), City of Lincoln Project No. 700791, Lincoln, Neb.
McCoy, P. T., Byrd, P. S., Pesti, G., and Singh, V. A. (1999b). “Improving sight distance from opposing left-turn lanes.” Proc., Transportation Frontiers for the Next Millenium, 69th Annual Meeting of the Institute of Transportation Engineers, Las Vegas, (CD-Rom).
McCoy, P. T., Navarro, U. R., and Witt, W. E. (1992). “Guidelines for offsetting opposing left-turn lanes on four-lane divided roadways.” Transportation Research Record 1356, Transportation Research Board, Washington, D.C.
McCoy, P. T., Pesti, G., Byrd, P. S., and Singh, V. A. (2001). “Guidelines for opposing left-turn lane-line widths.” Transportation Research Record 1751, Transportation Research Board, Washington, D.C.
Staplin, L., Lococo, K., Byington, S., and Harkey, D. (2001). “Guidelines and recommendations to accommodate older drivers and pedestrians.” Final Rep. No. FHWA-RD-01-051, Federal Highway Administration, Washington, D.C.
Transportation Research Board (TRB). (2000). “Highway capacity manual.” Special Rep. No. 209, Transportation Research Board, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Dec 18, 2003
Accepted: Mar 18, 2005
Published online: Nov 1, 2005
Published in print: Nov 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.