Development of a Mechanistic-Empirical Model to Characterize Rutting in Flexible Pavements
Publication: Journal of Transportation Engineering
Volume 130, Issue 4
Abstract
Dramatic increases in the number and weight of vehicles have resulted in severe rutting on highways in Taiwan. The Taiwan Area National Freeway Bureau constructed an in-service test road in 1996 to investigate the effect of pavement structures and paving materials on pavement performance. A mechanistic-empirical rutting model was developed to account for material property changes in the progression of rutting over time and the cumulated compressive plastic strains of all layers on the basis of traffic loading. In addition, a three-dimensional, dynamic finite-element simulation was established to calculate pavement responses that were input into the rutting model for predicting permanent deformation. Traffic speed showed significant impact on vertical strains at the top of the surface layer, and its influence was consistent with those measured by other researchers. The rutting parameters in the model were calibrated using rut depths obtained from the field test, and the validation outcome showed that their predictions were in good agreement with measured ones. The results of this paper demonstrate that incorporating the mechanistic-empirical approach in the prediction of rutting is viable and provides valuable information on the contribution of each layer to permanent deformation in flexible pavements.
Get full access to this article
View all available purchase options and get full access to this article.
References
Archilla, A. R., and Madanat, S.(2001). “Estimation of rutting models by combining data from different sources.” J. Transp. Eng., 127(5), 379–389.
Asphalt Institute (AI). (1961). Soil manual for design of asphalt pavement structures, College Park, Md.
Asphalt Institute (AI). (1982). Research and development of the Asphalt Institute’s thickness design manual MS-1, 9th Ed., College Park, Md.
Chen, D. H., Zaman, M., Laguros, J., and Soltani, A. (1995). “Assessment of computer programs for analysis of flexible pavement structure.” Transportation Research Record 1482, Transportation Research Board, Washington, D.C., 123–133.
Chen, J. S., Shiah, M. S., and Chen, H. J.(2001). “Quantification of coarse aggregate shape and its effect on engineering properties of hot-mix asphalt mixtures.” J. Test. Eval., 29(6), 513–519.
Cho, Y., McCullough, B. F., and Weissmann, J. (1996). “Considerations on finite-element method application in pavement structural analysis.” Transportation Research Record 1539, Transportation Research Board, Washington, D.C., 96–101.
Collop, A. C., Cebon, D., and Hardy, M. S. A.(1995). “Viscoelastic approach to rutting in flexible pavements.” J. Transp. Eng., 121(1), 82–93.
Federal Highway Administration (FHWA). (1997). Pavement primary response to dynamic loadings, U.S. Department of Transportation, McLean, Va.
Kenis, W. J. (1978). “Predictive design procedures, VESYS users manual—A design method for flexible pavements using the VESYS structural subsystem.” Rep. FHWA-RD-77-154, U.S. Department of Transportation, Washington, D.C.
Krutz, N. C., and Stroup-Gardiner, M. (1990). “Relationship between permanent deformation of asphalt concrete and moisture sensitivity.” Transportation Research Record 1259, Transportation Research Board, Washington, D.C., 163–168.
Ministry of Transportation and Communications (MOTC). (1998). Statistical abstract for transportation, Taipei, Taiwan (in Chinese).
Monismith, C. L., and Tayebali, A. A.(1988). “Permanent deformation (rutting) considerations in asphalt concrete pavement sections.” J. Assoc. Asphalt Paving Technol., 57, 414–463.
Peattie, K. R. (1962). “A fundamental approach to the design of flexible pavements.” Proc., 1st Int. Conf. on the Structural Design of Asphalt Pavements, Univ. of Michigan, Ann Arbor, Mich., 403–411.
Perl, M., Uzan, J., and Sides, A. (1983). “Visco-elasto-plastic constitute law for a bituminous mixture under repeated loading.” Transportation Research Record 911, Transportation Research Board, Washington, D.C., 20–27.
Ramsamooj, D. V., Ramadan, J., and Lin, G. S.(1998). “Model prediction of rutting in asphalt concrete.” J. Transp. Eng., 124(5), 448–456.
Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D. Y., and Kennedy, T. W. (1996). Hot mix asphalt materials, mixture design, and construction, 2nd Ed., NAPA Education Foundation, Lanham, Md.
Sebaaly, P. E., and Tabatabaee, N. (1993). “Influence of vehicle speed on dynamic loads and pavement response.” Transportation Research Record 1410, Transportation Research Board, Washington, D.C., 107–114.
Shell International Petroleum Company. (1978). Shell pavement design manual—asphalt pavements and overlays for road traffic, London.
Shook, J. F., and Finn, F. N. (1962). “Thickness design relationships for asphalt pavements.” Proc., 1st Int. Conf. on the Structural Design of Asphalt Pavements, Univ. of Michigan, Ann Arbor, Mich., 52–83.
Siddharthan, R., Krishnamenon, N., El-Mously, M., and Sebbaly, P. E.(2002). “Investigation of tire contact stress distributions on pavement response.” J. Transp. Eng., 128(2), 136–144.
Sousa, J. B., and Weissman, S. L.(1994). “Modelling pavement deformation of asphalt-aggregate mixes.” J. Assoc. Asphalt Paving Technol., 63, 224–257.
Tsai, P. A., and Chen, J. S. (2001). Field study of distress on flexible pavements, Ministry of Transportation and Communication, Taipei, Taiwan (in Chinese).
Uzan, J.(1996). “Asphalt concrete characterization for pavement perfor-mance prediction.” J. Assoc. Asphalt Paving Technol., 65, 573–607.
White, T. D., Haddock, J. E., Hand, A. J., and Fang, H. (2002). “Contribution of pavement structural layers to rutting of hot mix asphalt pavements.” NCHRP Rep. 468, National Cooperative Highway Research Program, Washington, D.C.
Zafir, Z., Siddharthan, R., and Sebbaly, P. E.(1994). “Dynamic pavement strains from moving traffic loads.” J. Transp. Eng., 120(5), 821–824.
Zaghloul, S. M., and White, T. D. (1993). “Use of a three-dimensional, dynamic finite-element program for analysis of flexible pavement.” Transportation Research Record 1388, Transportation Research Board, Washington, D.C., 60–69.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jun 13, 2002
Accepted: Apr 23, 2003
Published online: Jun 15, 2004
Published in print: Jul 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.