Discrete-Element Method Investigation of the Resilient Behavior of Granular Materials
Publication: Journal of Transportation Engineering
Volume 130, Issue 4
Abstract
This paper presents the results of numerical simulations of the resilient modulus test used to mechanically characterize the resilient behavior of aggregate materials, commonly used in pavement bases and subbases. The investigation made use of the discrete-element method (DEM) to replicate the particle behavior usually experienced during laboratory sample preparation and testing. The simulations were based on assemblies of circular particles confined between top and bottom rigid boundaries and laterally confined at constant stress. Contact forces and displacements were assumed to obey a linear relationship and shear forces were bounded by a maximum value (Coulomb friction law). Compacted samples were subjected to deviator repeated loads. The investigation showed that the DEM is capable of reproducing the results of the resilient modulus test performed on real granular materials in a qualitative manner. Further, the method predicted the effect of the state of stress depicted by laboratory testing.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials (AASHTO). (1986). Guide for design of pavement structures, Washington, D.C.
American Association of State Highway and Transportation Officials (AASHTO). (1992). “Resilient modulus of unbound granular base/subbase materials and subgrade soils.” SHRP Protocol P46: AASHTO Standard Test Designation T–294–92, Washington, D.C.
American Association of State Highway and Transportation Officials (AASHTO). (1993). AASHTO guide for design of pavement structures 1993, Washington, D.C.
Anderson, M. (1989). “A data base method for backcalculation of composite pavement layer moduli.” Nondestructive testing of pavements and backcalculation of moduli, A. J. Bush III and G. Y. Baladi, eds., ASTM, West Conshohocken, Pa., 452–467.
Bardet, J. P., and Proubet, J. A.(1991). “A numerical investigation of the structure of persistent shear bands in granular media.” Geotechnique, 41(4), 599–613.
Brown, S. F.(1974). “Repeated load testing of a granular material.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 100(7), 825–841.
Brown, S. F., and Selig, E. T. (1991). “The design of pavement and rail track foundations.” Cyclic loading of soils: from theory to design, M. P. O’Reilly and S. F. Brown, eds., Blackie and Son, Glasgow, U.K., 249–305.
Cook, B. J., and Jensen, R. P. (2002). “Numerical modeling of discontinua.” Proc., 3rd Int. Conf. on Discrete Element Methods, Santa Fe, N.M.
Cundall, P. A. (1971). “A computer model for simulating progressive, large scale movements in blocky rock systems.” Proc., Int. Symp. on Rock Fracture, International Society for Rock Mechanics, Lisboa, Portugal.
Cundall, P. A., and Hart, R. D. (1989). “Numerical of discontinua.” Proc., 1st U.S. Conf. on. Discrete Element Method, Golden, Colo.
Cundall, P. A., and Strack, O. D. L. (1978). “The distinct element method as a tool for research in granular media.” Rep. Concerning NSF Grant ENG76-20711, Part I, National Science Foundation, Arlington, Va.
Cundall, P. A., and Strack, O. D. L. (1979). “The distinct element method as a tool for research in granular media.” Rep. Concerning NSF Grant ENG76-20711, Part II, National Science Foundation, Arlington, Va.
Dawson, A. R., Thom, N. H., and Paute, J. L. (1996). “Mechanical characteristics of unbound granular materials as a function of condition.” Flexible Pavements: Proc., European Symp. Euroflex. 199, A. G. Correia, ed., Balkema, Rotterdam, The Netherlands, 35–44.
De Josselin de Jong, G., and Verruijt, A. (1969). “Etude photo-elastique d’un empilement de disques.” Cahiers du Groupe Français de Rheologie II, 1, 73–86 (in French).
Hicks, R. G. (1970). “Factors influencing the resilient properties of granular materials.” PhD thesis, Univ. of California at Berkeley, Berkley, Calif.
Hicks, R. G., and Monismith, C. L. (1971). “Factors influencing the resilient properties of granular materials.” Highway Research Record 345, Highway Research Board, Washington, D.C., 15–31.
LeKarp, F., Isacsson, U., and Dawson, A.(2000). “State of the art. I: Resilient response of unbound aggregates.” J. Transp. Eng., 126(1), 66–75.
Mahoney, J. P., Coetzee, N. F., Stubstad, R. N., and Lee, S. W. (1989). “A performance comparison of selected backcalculation computer programs.” Nondestructive testing of pavements and backcalculation of moduli, A. J. Bush III and G. Y. Baladi, eds., ASTM, West Conshohocken, Pa., 452–467.
Mustoe, G. G. W., Henriksen, M., and Huttelmaier, H.-P., eds. (1989). Proc., 1st U.S. Conf. on. Discrete Element Methods, Golden, Colo.
Pezo, R. F., Claros, G., Hudson, W. R., and Stokoe, K. H. (1992). “Development of a reliable resilient modulus test for subgrade and non-granular subbase materials for use in routine pavement design.” Research Rep. 1177-4f, Project 2/3/10-8-88/0-1177, Bureau of Engineering Research, Univ. of Texas at Austin, Austin, Tex.
Rada, G., and Witczak, M. W. (1981). “Comprehensive evaluation of laboratory resilient moduli results for granular material.” Transportation Research Record 810, Transportation Research Board, Washington, D.C., 23–33.
Robinson, R. G. (1974). “Measurement of the elastic properties of granular materials using a resonance method.” TRRL Supplementary Rep. No. 111UC, Transport Road Research Laboratory, Crowthorne, U.K.
Smith, W. S., and Nair, K. (1973). “Development of procedures for characterization of untreated granular base coarse and asphalt-treated base course materials.” Rep. No. FHWA-RD-74-61, Federal Highway Administration, Washington, D.C.
Sweere, G. T. H. (1990). “Unbound granular basis for roads.” PhD thesis, University of Delft, Delft, The Netherlands.
Thom, N. H., and Brown, S. F. (1988). “The effect of grading and density on the mechanical properties of a crushed dolomite limestone.” Proc., 14th ARRB Conf., ARRB Transportation Research, Canberra, Australia, 14(7), 94-10.
Walton, O. R. (1982). “Explicit particle dynamics model for granular materials.” Proc., 4th Int. Conf. on Numerical Methods in Geomechanics, Edmonton, Canada, Z. Eisenstein, ed., Balkema, Rotterdam, The Netherlands, 1261–1268.
Williams, J. R., and Mustoe, G. G. W. (1993). “Numerical modeling of discontinua.” Proc., 2nd Int. Conf. on. Discrete Element Methods, Cambridge, Mass.
Zaman, M., Chen, D., and Laguros, J.(1994). “Resilient moduli of granular materials.” J. Transp. Eng., 120(6), 967–988.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Apr 8, 2002
Accepted: Jun 24, 2003
Published online: Jun 15, 2004
Published in print: Jul 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.