New Consistency Model for Rural Highways and Its Relationship to Safety
Publication: Journal of Transportation Engineering
Volume 130, Issue 3
Abstract
The goal of the research was to study consistency of design on two-lane rural highways and to ascertain the existence of a relationship between consistency and safety level. The immediate objectives were to develop new, independent measures of consistency that could reflect the similarity (or lack thereof) of performance along an entire level or hilly section, to develop a new consistency model, and to find the relationship between the new model and crash rates on two-lane rural highways. Two consistency measures were developed: the first was the relative area bounded by the speed profile and the average weighted speed; the second was the standard deviation of operating speeds in each design element along the entire section investigated. Following an extensive sensitivity analysis of these two measures, thresholds that quantified the design quality were suggested. Based on the two independent measures, a consistency model was developed; and thresholds for good, acceptable, and poor design consistency of any section were proposed. Additional analysis was conducted on the relationship between the proposed consistency model and the safety level of two-lane highways. This was done initially on a limited data set of nine local, two-lane highway sections. It was found that as design consistency increased, crash rates decreased significantly. In a second phase, the analysis was expanded and the same consistency model was applied to a data set of 28 two-lane U.S. highways. It was found that crash rates decreased when the consistency value increased.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Masaeid, H. R., Hamed, M., Aboul-Ela, M., and Ghannan, A. G. (1995). “Consistency of horizontal alignment for different vehicle classes.” Transportation Research Record 1500, Transportation Research Board, National Research Council, Washington, D.C., 178–183.
American Association of State Highway Officials (AASHO). (1972). Driver expectancy checklist, Washington, D.C.
Anderson, I. B., and Krammes, R. A. (2000). “Speed reduction as a surrogate for accident experience at horizontal curves on rural two-lane highways.” Transportation Research Record 1701, Transportation Research Board, Washington, D.C., 86–94.
Garber, N. J., and Ehrhart, A. A. (2000). “The effect of speed, flow and geometric characteristics on crash rates for different types of Virginia highways.” VTRC 00-R15, Virginia Transportation Research Council, Charlottesville, Va.
Glennon, J. C., Harwood, D. W., Free, S., and Gray, C. W. (1978). “Highway design consistency and systematic design related to highway safety.” Transportation Research Record 681, National Research Council, Washington, D.C., 77–88.
Krammes, R. A. (1997). “Interactive highway safety design model: Design consistency module.” Public Roads, September/October, 47–51.
Krammes, R. A., and Hayden, C. (2003). “Making two-lane roads safer.” Public Roads, January/February, 16–21.
Krammes, R. A., Hoon, O. H., and Rao, K. S. (1995). “Highway geometric design consistency evaluation software.” Transportation Research Record 1500, Washington, D.C., 19–24.
Lamm, R., and Choueiri, E. (1995). “The relationship between highway safety and geometric design consistency: A case study.” Road safety in Europe and Strategic Highway Research Program (SHRP), 133–151.
McFadden, J., and Elefteriadou, L. (1997). “Formulation and validation of operating speed-based design consistency models by bootstrapping.” Transportation Research Record 1579, Transportation Research Board, Washington, D.C., 97–103.
Messer, C. J. (1980). “Methodology for evaluating geometric design consistency.” Transportation Research Record 757, Transportation Research Board, National Research Council, Washington, D.C., 7–14.
Polus, A.(1980). “The relationship of overall geometric characteristics to the safety level of rural highways.” Traffic Q., 34, 575–585.
Polus, A., and Dagan, D. (1988). “Models for evaluating the consistency of highway alignment.” Transportation Research Record 1122, Transportation Research Board, National Research Council, Washington, D.C., 47–56.
Polus, A., Fitzpatrick, K., and Fambro, D. (2000). “Predicting operating speeds on tangent sections of two-lane rural highways.” Transportation Research Record 1737, Transportation Research Board, National Research Council, Washington, D.C., 50–57.
Solomon, D. (1964). Accidents on main rural highways related to speed, Driver and Vehicle, Bureau of Public Roads, Washington, D.C.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 130 • Issue 3 • May 2004
Pages: 286 - 293
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Oct 15, 2002
Accepted: Jun 12, 2003
Published online: Apr 15, 2004
Published in print: May 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.