Airport Passenger Buildings: Efficiency through Shared Use of Facilities
Publication: Journal of Transportation Engineering
Volume 128, Issue 3
Abstract
This paper provides a comprehensive guide to the design of shared facilities. Shared facilities serve many users (aircraft, airlines, or types of services) in several functions (arrivals, departures, international and domestic, and so on). They significantly increase the utilization of facilities, thus reducing the amount needed for any level of traffic. They also increase the flexibility of the building, thus enabling it to accommodate easily to variations in traffic composition (the fractions associated with specific airlines or international and domestic services). Shared facilities reduce capital expenditures by up to 30%, and correspondingly increase the return on the investment. Two main factors motivate the use of shared facilities. One is peaking; that is, variations in the levels of traffic (either in hours or a day). The other is uncertainty in the timing of the traffic (either in the short run or in the long run). The paper details the appropriate analyses in each instance. It presents analytic results showing that the design of passenger buildings should normally include shared space, swing gates, and shared facilities that buffer uncertain demands.
Get full access to this article
View all available purchase options and get full access to this article.
References
Amran, M., and Kulatilaka, N. (1999). Real options: Managing strategic investment in an uncertain world, Harvard Business School Press, Boston.
Ashford, N., and Wright, P. (1992). Airport engineering, 3rd Ed., Wiley, New York.
Bandara, S., and Wirasinghe, S. (1988). “Airport gate position estimation under uncertainty.” Transportation Research Record 1199, Transportation Research Board, Washington, D.C., 41–48.
Bandara, S., and Wirasinghe, S.(1990). “Airport gate position estimation for minimum total cost—Approximate closed form solution.” Transp. Res. B,24, 287–297.
Belin, S. C. (2000). “Designing flexibility into airport passenger buildings: The benefits of multifunctional space and facilities.” SM thesis, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, Mass.
Brealey, R., and Myers, S. (1996). Principles of corporate finance, 5th Ed., McGraw-Hill, New York.
Dada, F., and Wirasinghe, S. (1994). “Cost considerations in planning pier terminals.” Aviation crossroads: Challenges in a changing world, Proc., 23rd Int. Air Transportation Conf., ASCE, New York, 183–192.
de Neufville, R. (1976). Airport systems planning: A critical look at the methods and experience, MIT Press, Cambridge, Mass.
de Neufville, R. (1990). Applied systems analysis: Engineering planning and technology management, McGraw-Hill, New York.
de Neufville, R., and Barber, J.(1991). “Deregulation induced volatility of airport traffic.” Transp. Plan. Technol., 16(2), 117–128.
Digest of statistics—Airport traffic. (1990). International Civil Aviation Organization, Montréal.
Digest of statistics—Airport traffic. (1991). International Civil Aviation Organization, Montréal.
Digest of statistics—Airport traffic. (1992). International Civil Aviation Organization, Montréal.
Digest of statistics—Airport traffic. (1993). International Civil Aviation Organization, Montréal.
Digest of statistics—Airport traffic. (1994). International Civil Aviation Organization, Montréal.
Digest of statistics—Airport traffic. (1995). International Civil Aviation Organization, Montréal.
Digest of statistics—Airport traffic. (1996). International Civil Aviation Organization, Montréal.
Digest of statistics—Airport traffic. (1997). International Civil Aviation Organization, Montréal.
Faulkner, T. W. (1996). “Applying options thinking to R & D valuation.” Research Tech. Mgt., May-June, 50–56.
Feldman, J., (1999). “Controlling the airport data grid.” Air Transport World, 36(6), 34.
Fordham, G. (1995). “Planning airport terminals for flexibility and change.” National Conf. Publication, Institute of Engineers, Canberra, Australia, 45–50.
Gaudinat, D. (1980). “A study of gate sharing at airports: Boston as an example.” SM thesis, Dept. of Aeronautics and Astronautics, Massachusetts Institute of Technology, Cambridge, Mass.
Hassounah, M. L., and Steuart, G. N. (1993). “Demand for aircraft gates.” Transportation Research Record 1423, Transportation Research Board, Washington, D.C., 26–33.
Horonjeff, R., and McKelvey, F. (1994). Planning and design of airports, 4th Ed., McGraw-Hill, New York.
Little, R. (1998). “New BWI pier is a dud so far.” Baltimore Sun, Nov. 29, 1D.
Paullin, R. (1966). “Passenger flows at departure lounges.” Graduate Rep., Institute of Transportation and Traffic Engineering, Univ. of California, Berkeley, Calif.
Paullin, R., and Horonjeff, R.(1969). “Sizing of departure lounges in airport buildings.” Transp. Eng. J. ASCE, 95(3), 267–277.
Reiss, S.(1995). “Down-to-earth terminal design.” Civil Engineering,65(2), 48–51.
South Australian Government. (n.d.). 〈http://www.ministers.sa.gov.au/premier/highlights/drawing_board/airport_upgrade.html〉.
Steuart, G. N.(1974). “Gate position requirements at metropolitan airports.” Transp. Sci., 8(2), 169–189.
Trigeorgis, L. (1996). Real options: Managerial flexibility and strategy in resource allocation, MIT Press, Cambridge, Mass.
U.S. Federal Aviation Administration (FAA). (1988). “Planning and design guidelines for airport terminal facilities.” Advisory Circular 150/5360-13, U.S. Government Printing Office, Washington, D.C.
Wirasinghe, S., and Shehata, M.(1988). “Departure lounge sizing and optimal seating capacity for a given aircraft/flight mix—(i) single gate, (ii) several gates.” Transp. Plan. Technol., 13(1), 57–71.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Dec 8, 2000
Accepted: Apr 10, 2001
Published online: Apr 15, 2002
Published in print: May 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.