Cost-Based Space Estimation in Passenger Terminals
Publication: Journal of Transportation Engineering
Volume 128, Issue 2
Abstract
Passenger processing space estimations described in textbooks and guidebooks are based solely on peak passenger demand and personal space standards describing perceived passenger comfort. The economic aspects of facility sizing are disregarded by those methods. In this article, an analytical tool based on deterministic queuing theory is presented for determining optimal personal space, which minimizes total cost. Total cost is defined as the sum of the cost of constructing, operating, and maintaining (COM) the facility and the cost of passenger (user) inconvenience. While COM cost is derived as a function of the expected maximum queue length and personal space, passenger cost is defined as a function of average queue length and personal space. Application of the tool is demonstrated using a hypothetical data from a typical passenger check-in lobby. It is shown that optimal personal space is influenced less by unit user cost than by unit construction cost, even when scale economies exit. Moreover, the degree of elasticity and the optimal personal space are dependent on the cost functional form.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ashford, N. (1988). “Le niveau de service—un critere pour la conception des aerogares de passagers.” Transports, 330(Juillet-Aout), Montreal (in French).
Ashford, N., and Wright, P. H. (1992). Airport engineering, 3rd Ed., Wiley, New York.
Blow, C. J. (1996). Airport terminals, Butterworth, Ottawa.
Federal Highway Administration (FAA). (1988). “Planning and design guidelines for airport terminal facilities.” FAA Advisory Circular 150/5360-13, Washington, D.C.
Federal Highway Administration (FAA). (1997). “FAA cost-benefit analysis.” Transportation Research Circular No. 476, Washington, D.C.
Fruin, J. J. (1971). Pedestrian planning and design metropolitan, Metropolitan Association of Urban Designer and Environmental Planners, New York.
Horonjeff, R., Mckelvey, F., and Horonjeff, D. (1993). Planning and design of airports, 4th Ed., McGraw-Hill, New York.
International Air Transport Association (IATA). (1995). Airport development reference manual, 8th Ed., Montreal.
International Air Transport Association (IATA). (1996). Guidelines for airport capacity/demand management, 3rd Ed., Geneva.
International Civil Aviation Organization (ICAO). (1990). “Aerodromes, Volume 1.” Aerodrome design and operations, Montreal.
National Fire Protection Association (NFPA). (1993). NFPA130 fixed guideway transit systems, Quincy, Mass.
Paullin, R., and Horonjeff, R.(1969). “Sizing of departure lounges in airport buildings,” Transp. Eng. J., 2, 267–277.
Ralph M. Parsons Company. (1975). “The apron and terminal building planning report.” Rep. No. FAA-RD-75-191, Washington, D.C.
Seneviratne, P. N., and Javid, M.(1994). “Cost-based approach for sizing of pedestrian facilities.” J. Adv. Transp., 28(2), 189–200.
Seneviratne, P. N., and Morrall, J. F.(1985). “Level of service on pedestrian facilities.” Transp. Q.,39(1), 109–112.
Stoddard, A. T. (1982). “A model for determining the width of airport pedestrian corridors.” Proc., 1983 Meeting of the Transportation Research Board, Transportation Research Board, Washington, D.C., 17–21.
Subprasom, K. (2000). “Design space standards for passenger terminals.” MS thesis, Utah State Univ., Logan, Utah.
Transportation Research Board (TRB). (2000). Highway Capacity Manual, Special Rep. 209, Washington, D.C.
White, J. A., Schmidt, J. W., and Bennett, G.K. (1975). Analysis of queuing systems, Academic, New York.
Wright, P. H., Ashford N. J., and Stammer, R. J., Jr. (1998). Transportation engineering planning and design, Wiley, New York.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Aug 4, 2000
Accepted: Jun 15, 2001
Published online: Mar 1, 2002
Published in print: Mar 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.