Hydraulic Transport of Fine and Coarse Sediment Mixtures in Pipelines
Publication: Journal of Transportation Engineering
Volume 128, Issue 1
Abstract
This paper presents results from a comprehensive laboratory study of the effects of a fine grained sediment (clay) carrier fluid on the hydraulic gradient of sand-sized sediments (600–2,000 microns) in a 103-mm diameter pipeline. Three sand sizes were evaluated in the pipeline: (1) medium sand (670 microns), coarse sand (1,260 microns), and very coarse sand (2,040 microns). Initial experiments were conducted with water as the carrier fluid. Sand concentrations of 0.05, 0.10, 0.20, and 0.30 by volume were evaluated. For each sand concentration, the effect of phosphate clay concentrations on the hydraulic gradient was evaluated. The clay carrier fluids exhibited both Newtonian and non-Newtonian fluid properties. Study results indicate that the hydraulic gradient reduction effect resulting from phosphate clay added to sand and water slurries increases with sand concentration, decreases with particle size, and is maximum within the flow range representing maximum solids stratification with bed contact (2.0–3.0 m/s) in the test pipeline.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bruhl, H., and Kazanskij, I. (1976). “New results concerning the influence of fine particles on sand-water flows in pipes.” Hydrotransport 4, Paper B2, British Hydromechanics Research Association (BHRA) Fluid Engineering, Cranfield, Bedford, U.K., 19–28.
Carstens, M. R. (1981). “Non-Newtonian flow.” Transportation of Solids Using Centrifugal Pumps Course, Georgia Iron Works Hydraulic Laboratory.
Duckworth, R. A. (1986). “The pipeline transport of coarse materials in a non-Newtonian carrier fluid.” Proc., 10th Int. Conf. on the Hydraulic Transport of Solids in Pipes, Innsbruck, Austria, 69–88.
Durand, K. (1953). “Basic relationships of the transportation of solids in pipes-experimental research.” Proc., Minnesota Int. Hydraulics Convention, International Association for Hydraulic Research, 89.
Georgia Iron Works (GIW) Testing Laboratory. (1989). “Phosphate matrix pipeline design data and tools for efficiency improvement.” Publication No. 04-037-078, Florida Institute of Phosphate Research.
Govier, G. W., and Aziz, K. (1972). The flow of complex mixtures in pipes, Van Nostrand Reinhold, New York.
Hisamitsu, N. (1978). “Effect of added fine particles on flow properties of settling solids.” Hydrotransport 5, Paper D3, British Hydromechanics Research Association (BHRA) Fluid Engineering, Cranfield, Bedford, England.
Hou, H. C. (1986). “Investigation of optimal grain-distribution for transport with high concentration.” Proc., 10th Int. Conf. on the Hydraulic Transport of Solids in Pipes, Innsbruck, Austria, 177–183.
Kazanskij, I. (1974). “Influence of added fine particles on the flow structure and the pressure losses in sand-water mixture.” Hydrotransport 3, Paper D2, British Hydromechanics Research Association (BHRA) Fluid Engineering, Cranfield, Bedford, England.
Scott, S. H. (1997). “The effect of fine sediment rheology on coarse sediment transport in pipes.” PhD dissertation, Colorado State Univ., Fort Collins, Colo.
Sive, A. W., and Lazarus, J. H. (1986). “A comparison of some generalized correlations for the head loss gradient of mixed regime slurries.” Proc., 10th Int. Conf. on the Hydraulic Transport of Solids in Pipes, Innsbruck, Austria, 149–175.
Wilson, K. C. (1992). Slurry transport using centrifugal pumps, Elsevier Applied Science, New York.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Apr 22, 1999
Accepted: Nov 28, 2000
Published online: Jan 1, 2002
Published in print: Jan 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.