Testing and Analysis of Steel Pipe Segments
Publication: Journal of Transportation Engineering
Volume 127, Issue 5
Abstract
Steel pipelines buried in cold regions are subject to thermally induced axial loads, hoop stresses caused by the action of the fluids they convey, and differential settlements caused by factors such as thaw settlements, frost heave, and landslides. Due to these loads, pipelines may experience localized deformations well into the plasticity range of the pipe material. This paper presents an experimental program consisting of seven tests conducted to investigate and document the deformational behavior of full-scale pipes subjected to loads similar to those in the field. The specimens and loading conditions were carefully selected to match those in the field. A finite-element model was developed using the finite-element simulator ABAQUS to predict the local buckling behavior of pipes. The finite-element model was based on a large displacement, large rotation, finite-membrane-strain formulation and included material nonlinearity effects. The comparison between the numerical and the experimental results demonstrates the ability of the analytical model to predict the local buckling behavior of pipes when deformed well into the postyield range.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American National Standards Institute (ANSI). ( 1979). “ASME code for pressure piping, liquid petroleum transportation systems.” ANSI/ASME B31-4, New York.
2.
American National Standards Institute (ANSI). ( 1982). “ASME code for pressure piping, gas transmission and distribution piping systems.” ANSI/ASME B31-8, New York.
3.
Bathe, K-J. ( 1982). Finite element procedures in engineering analysis, Prentice-Hall, Englewood Cliffs, N.J.
4.
Bouwkamp, J. G., and Stephen, R. M. (1973). “Large diameter pipe under combined loading.”J. Transp. Engrg., ASCE, 99(3), 521–536.
5.
Batterman, S. C. ( 1965). “Plastic buckling of axially compressed cylindrical shells.” AIAA J., 3(2), 316–325.
6.
Canadian Standards Association (CSA). ( 1990). “Oil pipeline systems.” CAN/CSA-Z183-M90, Rexdale, Ont., Canada.
7.
Canadian Standards Association (CSA). ( 1993). “Steel line pipe—Oil & gas industry systems and materials.” CAN/CSA-Z245.1-M84, Rexdale, Ont., Canada.
8.
Canadian Standards Association (CSA). ( 1994). “Oil and gas pipeline systems.” CAN/CSA-Z662-94, Rexdale, Ont., Canada.
9.
Det Norske Veritas. ( 1981). “Rules for submarine pipeline systems.” Norway.
10.
Gellin, S. ( 1980). “The plastic buckling of long cylindrical shells under pure bending.” Int. J. Solids and Struct., 16, 397–407.
11.
Gresnigt, A. M. ( 1986). “Plastic design of buried steel pipelines in settlement areas.” Heron, 31(4).
12.
Hibbit, H. D., Karlson, B. I., and Sorensen, P. ( 1995). “ABAQUS version 5.5—Theory manual.” Pawtucket, R.I.
13.
Kim, H. O., and Velasco, P. ( 1988). “Review of pipe buckling for arctic pipeline design.” Proc., 7th Int. Conf. on Offshore Mech. and Arctic Engrg., 307–315.
14.
Mohareb, M., Elwi, A. E., Kulak, G. L., and Murray, D. W. ( 1994). “Deformational behaviour of line pipe.” Struct. Engrg. Rep. No. 202, Dept. of Civ. Engrg., University of Alberta, Edmonton, Alto., Canada.
15.
Reddy, B. D. ( 1979). “An experimental study of the plastic buckling of circular cylinders in pure bending.” Int. J. Solids and Struct., 15(9), 669–683.
16.
Workman, G. H. ( 1988). “Manufacturing residual stress effects on buried pipeline structural response.” Proc., 7th Int. Conf. on Offshore Mech. and Arctic Engrg.
17.
Yoosef-Ghodsi, N., Cheng, J. J. R., Murray, D. W., Doblanko, R. M., and Wilkie, S. A. ( 2000). “Analytical simulation and field measurements for a wrinkle on the norman wells pipeline.” Proc., Int. Pipeline Conf., Offshore and Arctic Engrg. Div., ASME, Calgary, Alta., Canada, 931–938.
18.
Yoosef-Ghodsi, N., Kulak, G. L., and Murray, D. W. ( 1994). “Behaviour of girth-welded line pipe.” Struct. Engrg. Rep. No. 203, Dept. of Civ. Engrg., University of Alberta, Edmonton, Alta., Canada.
19.
Yoosef-Ghodsi, N., Kulak, G. L., and Murray, D. W. ( 1995). “Some test results for wrinkling of girth welded line pipe.” Proc., 14th Conf. on Offshore Mech. and Arctic Engrg. on Pipeline Technol., ASME, Copenhagen, 379–388.
20.
Zimmerman, T. J. E., Stephens, M. J., DeGeer, D. D., and Chen, Q. ( 1995). “Compressive strain limits for buried pipelines.” Proc., 14th Conf. on Offshore Mech. and Arctic Engrg., Pipeline Technol., ASME, Copenhagen, 365–378.
Information & Authors
Information
Published In
History
Received: Dec 2, 1998
Published online: Oct 1, 2001
Published in print: Oct 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.