Phosphate Waste in Mixtures to Improve Their Deformation
Publication: Journal of Transportation Engineering
Volume 126, Issue 5
Abstract
The objective of this research is to investigate the deformation behavior of asphalt concrete mixtures containing four phosphate waste fillers (12.7-mm reject, 4.5-mm reject, slime, and phosphogypsum) as compared to the behavior of a standard mixture containing limestone filler. The Marshall test results revealed that, generally, there was improved Marshall characteristics for the mixtures containing these wastes when compared to the standard mixture. The immersion wheel tracking machine results revealed that the 12.7- and 4.5-mm reject fillers increased resistance to deformation by 2.2 and 1.5 times, respectively, as compared to the standard mixture. As measured by the immersion wheel tracking machine, the effect of water on the slime and phosphogypsum indicated poor behavior of the mixtures containing both fillers. It is recommended that the slime and phosphogypsum fillers should not be used in wearing course mixtures. It was further concluded that the Marshall test method provided misleading conclusions with respect to the effects of water on the mixtures containing slime and phosphogypsum fillers and in terms of ranking mixtures in the order of their ability to resist deformation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ASTM. (1974). “Resistance to plastic flow of bituminous mixtures, using Marshall apparatus,” ASTM D 1559, West Conshohocken, Pa.
2.
Austin, G. T. ( 1984). Shreve's chemical processing industries, McGraw-Hill, New York, 267–287.
3.
Brien, D. (1977). “Research in the design of asphalt.” The Hwy. Engr., 24(10), 14–21.
4.
Brown, S. F., Cooper, K. E., and Pooley, G. R. (1981). “Mechanical properties of bituminous materials for pavement design.” Proc. Eur. Symp. on Bituminous Mixtures, Cannes, France, 143–147.
5.
Buchner, W., Schliebs, R., Winter, G., and Buchel K. H. (1988). Industrial inorganic chemistry, VCH, New York.
6.
Choyce, P. W., Lammiman, K. A., and Taylor, I. F. (1984). “Resistance of deformation of hot rolled asphalt.” J. Hwy. and Transp., 31(1), 28–32.
7.
Deer, W. A., Howie, R. A., and Zussmar, J. ( 1992). “An introduction to the rock-forming minerals.” Longman scientific and technical, 2nd Ed., Hong Kong, 663–669.
8.
Fabb, T. R. J., and Heyes, J. V. (1984). “Deformation of asphalt wearing courses.” J. Inst. of Asphalt Technol., U.K., 34, 7–17.
9.
Hills, J. F. (1980). “The Marshall test in The Netherlands investigation into the reproducibility.” J. Inst. of Asphalt Technol., U.K., 29, 28–44.
10.
Lees, G. (1969). “The influence of binder and aggregate in the bituminous mixtures.” J. Inst. of Hwy. Engrs., 7–19.
11.
Lees, G. (1987). “Asphalt mix design for optimum structural and tyre interaction purposes.” Proc., Int. Conf. on Struct. Des. of Asphalt Pavements, University of Michigan, Ann Arbor, Mich., 404–417.
12.
Please, A. (1961). “Use of the Marshall test for evaluating dense bituminous surfacings.” J. Appl. Chem., U.K., 11, 73–80.
13.
Pooley, G. R. (1985). “Principles of Marshall mix design.” J. Inst. of Asphalt Technol., U.K., 36, 33–36.
14.
Specifications for highway and bridge construction. (1991). Ministry of Public Works and Housing, Amman, Jordan.
15.
Stock, A. F. (1985). “Evaluation of hot rolled asphalt mixes by Marshall, creep and dynamic stiffness test.” J. Inst. of Asphalt Technol., U.K., 36, 11–13.
16.
Uge, P., and Van de Loo. (1974). “Permanent deformation of asphalt mixes.” Proc., 19th Int. Annu. Conf., CTAA, 307–341.
Information & Authors
Information
Published In
History
Received: Jul 6, 1998
Published online: Sep 1, 2000
Published in print: Sep 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.