Analysis and Design Optimization of Flexible Pavement
Publication: Journal of Transportation Engineering
Volume 126, Issue 2
Abstract
A project-level optimization approach was developed to minimize total pavement cost within an analysis period. Using this approach, the designer is able to select the optimum initial pavement thickness, overlay thickness, and overlay timing. The model in this approach is capable of predicting both pavement performance and condition in terms of roughness, fatigue cracking, and rutting. The developed model combines the American Association of State Highway and Transportation Officials (AASHTO) design procedure and the mechanistic multilayer elastic solution. The Optimization for Pavement Analysis (OPA) computer program was developed using the prescribed approach. The OPA program incorporates the AASHTO equations, the multilayer elastic system ELSYM5 model, and the nonlinear dynamic programming optimization technique. The program is PC-based and can run in either a Windows 3.1 or a Windows 95 environment. Using the OPA program, a typical pavement section was analyzed under different traffic volumes and material properties. The optimum design strategy that produces the minimum total pavement cost in each case was determined. The initial construction cost, overlay cost, highway user cost, and total pavement cost were also calculated. The methodology developed during this research should lead to more cost-effective pavements for agencies adopting the recommended analysis methods.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
French, S., Hartley, R., Thomas, L. C., and White, D. J. (1986). Operational research techniques. Edward Arnold, London.
2.
Guide for design of pavement structures. (1993). American Association of State Highway and Transportation Officials, Washington, D.C.
3.
Haas, R., Hudson, W. R., and Zaniewski, J. P. (1994). Modern pavement management. Krieger Publishing Co., Melbourne, Fla.
4.
Highway design and maintenance model, HDM-III. (1985). The Johns Hopkins University Press, Baltimore, Md.
5.
Holsapple, V. S., and Jacob, A. B. W. (1994). Operations research and artificial intelligence. Ablex Publication Corp., Norwood, N.J.
6.
Huang, Y. H. (1993). Pavement analysis and design. Prentice-Hall, Englewood Cliffs, N.J.
7.
Hudson, W. R., and McCullough, B. F. (1973). “Flexible pavement design and management system formulation.” NCHRP Rep. 139, Highway Research Board, Washington, D.C.
8.
Li, D., and Qian, S. D. (1982). Operations research, 1st Ed., Tsinghua University Press, Beijing, China.
9.
Monismith, C. L. (1992). “Analytically based asphalt pavement design and rehabilitation: Theory to practice, 1962–1992.” Transp. Res. Rec. 1354, Transportation Research Board, Washington, D.C.
10.
Nie, T. J. (1982). Numerical methods—Engineering mathematics. Defense Industry Press, Beijing, China.
11.
Paterson, W. D. O. (1989). “A transferable causal model for predicting roughness progression in flexible pavements.” Transp. Res. Rec. 1215, Transportation Research Board, Washington, D.C.
12.
Sniedovich, M. (1992). Dynamic programming. Marcel Dekker, New York.
13.
Zaniewski, J. P., Elkins, G. E., and Flannagan, P. R. (1985). “An algorithm for user cost calculations in a pavement management system.” Proc., North Am. Pavement Mgmt. Conf., 1.
14.
Zaniewski, J. P., and Hudson, W. R. (1994). “Methodology to improve pavement—Investment decisions.” NCHRP Res. Proposal, Texas Research and Development Foundation, Austin, Tex.
Information & Authors
Information
Published In
History
Received: Dec 23, 1998
Published online: Mar 1, 2000
Published in print: Mar 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.