Standardized Elastic Moduli of Pavement Layers for Overlay Design
Publication: Journal of Transportation Engineering
Volume 121, Issue 2
Abstract
The application of elastic theory to the design of overlays on existing pavement requires that a modulus of elasticity be assigned to the existing structural system. Estimates of elastic modulus are obtained from dynamic deflection readings in the field; but asphalt is a highly temperature-sensitive viscoelastic material, and deflections not corrected to a standard temperature can produce misleading results. It is therefore the objective of the present study to develop a procedure for estimating an effective modulus of elasticity for a layer of asphaltic concrete in which a temperature gradient exists because of the combined influences of solar radiation, wind, air temperature, cloud cover, and other variables specific to time and location that cause temperature variations within the pavement layer. Two models are presented for the achievement of that objective. The first of the two models has been designed to utilize site-specific conditions for calculating a temperature profile at a given time within an asphaltic layer. The second model relates an equivalent elastic modulus to the calculated temperature profile.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Society of Heating, Refrigeration and Air Conditioning (ASHRAE). (1987). “Chapter 47; solar energy utilization.”ASHRAE handbook, systems & applications.
2.
Boussinesq, J. (1885). “Application des potentials a l'etude de l'equelibre et de mouvement des solids elastique.”Gauthier-Villars, Paris, France (in French).
3.
Burmister, D. M. (1994a). “A general theory of stresses and displacements in layered systems I.”J. Appl. Physics, 16(Feb.), 89–94.
4.
Burmister, D. M. (1945b). “A general theory of stresses and displacements in layered systems II.”J. Appl. Physics, 16(Mar.), 126–127.
5.
Burmister, D. M. (1945c). “A general theory of stresses and displacements in layered systems III.”J. Appl. Physics, 16(May), 296–302.
6.
Carnahan, B., Luther, H. A., and Wilkes, J. O. (1969). Applied numerical methods . John Wiley & Sons, Inc., New York, N.Y.
7.
Chua, K. M. (1989). “Evaluation of moduli backcalculation programs for low-volume roads.”Nondestructive testing of pavements and backcalculation of moduli; ASTM STP 1026, A. J. Bush III and G. Y. Baladi, eds., ASTM, Philadelphia, Pa., 398–414.
8.
Colony, D. C., and Wolfe, R. K.(1978). “Initial cooling of asphalt concrete mats.”Transp. Engrg. J. of ASCE, 104(3), 295–310.
9.
Lytton, R. L. (1989). “Backcalculation of pavement layer properties.”Nondestructive testing of pavements and backcalculation of moduli; ASTM STP 1026, A. J. Bush III and G. Y. Baladi, eds., ASTM, Philadelphia, Pa., 7–38.
10.
Robinson, R. G. (1985). “A model for calculating pavement temperatures from meterological data.”Res. Rep. 44; Pavement Design and Maintenance Division, Highways and Structures Department, Transport and Road Research Laboratory, Crowthorne, Bershire, England.
11.
Sargand, S. (1991). “Evaluation of resilient modulus by backcalculation technique.”Final Proj. Rep., Ohio Department of Transportation, Ohio.
12.
Thenn de Barros, S. (1966). “Deflection factor charts for two and three-layer elastic systems.”Hwy. Res. Rec. 145, HRB, Washington, D.C., 83–108.
13.
Threlkeld, J. L. (1970). Thermal environmental engineering, 2nd Ed., Prentice-Hall, Inc., Englewood Cliffs, N.J.
14.
Vaswani, N. K. (1971). “Method for separately evaluating structural performance of subgrades and overlaying flexible pavements.”Hwy. Res. Rec. 362, HRB, Washington, D.C., 48–62.
15.
Wolfe, R. K., and Colony, D. C. (1977). “Asphalt cooling rates: a computer simulation study.”Final Rep. on Ohio Dept. of Transp. Proj. 2844, Columbus, Ohio.
16.
Wolfe, R. K., Colony, D. C., and Eaton, R. D. (1977). “Microprocessor plus Saul′Yev method solves simultaneous partial differential equations of the diffusion type with highly nonlinear boundary conditions.”Minicomputers and large scale computations, P. Lykos, ed., American Chemical Society Series 57, Washington, D.C.
17.
Wolfe, R. K., Heath, G. L., and Colony, D. C. (1980a). “The University of Toledo Time-Temperature Model laboratory and field Validation.”Final Rep. Ohio Dept. of Transp. Proj. 3101, Columbus, Ohio.
18.
Wolfe, R. K., Heath, G. L., and Colony, D. C. (1980b). “Hand-held microprocessor implementation of heretofore large computer simulation.”Computers and Industrial Eng., Vol. 4, 1–12.
19.
Wolfe, R. K., Heath, G. L., and Colony, D. C.(1983). “Cooling curve prediction of asphaltic concrete.”J. Transp. Engrg., ASCE, 109(1), 137–147.
20.
Wolfe, R. K., and Randolph, B. W. (1993). “Temperature adjustment of dynamic deflection measurements of asphalt concrete pavements.”Rep., FHWA/OH-93/010, Ohio Dept. of Transp., Columbus, Ohio.
21.
Yoder, E. J., and Witczak, M. W. (1975). Principles of pavement design, 2nd Ed., John Wiley & Sons, Inc., New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Mar 1, 1995
Published in print: Mar 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.