Effect of Orientation of Approach Slabs on Pavement Deformation
Publication: Journal of Transportation Engineering
Volume 120, Issue 4
Abstract
Differential settlements often occur between bridge abutments and the approach embankments either because the soil underlying the embankment consolidates or because the pavement and embankment materials are compressible and the bridge deck is essentially rigid. This causes a “bump” to form at the approach abutment, and so many bridges are provided with approach slabs, the purpose of which is to span across any difference in level caused by differential settlement between the embankment and the bridge. Repeated traffic loadings can, however, produce a new bump at the end of the slab. To overcome this problem, approach slabs can be constructed at an angle to the horizontal, sloping down beneath the pavement. The varying thickness of base course above the slab produces a graded deformation in the pavement and results in a smoother riding surface. Model pavements and approach slabs have been tested in a laboratory‐scale test track, and these tests have shown the effectiveness of sloping approach slabs in reducing the problem of a bump forming at the end of the slab.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barenberg, E. J., and Hazarida, B. P. (1976). “Use of University of Illinois test track to evaluate pavement performance.” Transp. Res. Rec. 574, TRB, Washington, D.C., 38–50.
2.
Brown, S. F., and Brodrick, B. V. (1981). “Nottingham pavement test facility.” Transp. Res. Board No. 810, TRB, Washington, D.C., 67–72.
3.
Paterson, W. D. O. (1972). “Deformations in asphalt concrete wearing courses caused by traffic.” Proc., 3rd Int. Conf. on Struct. Design of Asphaltic Pavements, London, England, 317–325.
4.
Road Transport Research. (1985). “Full scale pavement tests.” Rep., Organisation for Economic Co‐Operation and Development (OECD), Paris, France.
5.
Shackel, B., and Arora, M. G. (1978). “The application of a full‐scale road simulator to the study of highway pavements.” Australian Road Res., Vermont South, Victoria, Australia, 8(2), 17–31.
6.
Sparks, G. H. (1970). “Development and use of a machine for examining the behavior of pavement structures under the action of moving wheel loads.” M.Eng.Sci. thesis, University of Sydney, Sydney, Australia.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Feb 1, 1993
Published online: Jul 1, 1994
Published in print: Jul 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.