Passenger‐Terminal Simulation Model
Publication: Journal of Transportation Engineering
Volume 120, Issue 4
Abstract
A fluid approximation model for the simulation of passenger terminals is described. It is implemented via a specially designed, high‐level, passenger‐terminal simulation language, TERMSIM, which is Pascal‐based. TERMSIM uses three broad groups of terminal submodels: processors (such as check‐in and security), storage (such as ancillary services and hold rooms), and circulation components (such as corridors). The TERMSIM language consists of seven terminal‐component names, three flow‐control unit names, and six command statements allowing a terminal designer to create a representation of a terminal very quickly. Terminal operations are described by the number of passengers arriving, being served and queuing at the various terminal facilities. The structure of the model is described along with the mechanics underlying some of the terminal‐component models and representative parameter magnitudes required by these models. The modeling components of TERMSIM are structured in a modular way allowing the mechanics underlying each model to be rewritten and inserted into the program. A simple example is used to illustrate the programming language, and the capabilities of the model are illustrated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ashford, N., Hawkins, N., O'Leary, M., Bennetts, D., and McGinity, P. (1976). “Passenger behavior and design of airport terminals.” Transp. Res. Record 588, Transportation Research Board, Washington, D.C., 18–26.
2.
Ashford, N., O'Leary, M., and McGinity, P. (1976). “Stochastic modelling of passenger and baggage flows through an airport terminal.” Traffic Engrg. and Control, 17(5), 207–210.
3.
Baron, P. (1969). “A simulation analysis of airport terminal operations.” Transp. Res., 3(4), 481–491.
4.
Bastiansen, E., Hviid, J., and Matthiesen, P. (1980). “Simulation defines alternatives for Copenhagen terminal expansion.” Airport Forum, (1), 21–24.
5.
Cheng, C., and Gilmour, P. (1978). “Computer simulated passenger service levels for airport terminals.” Airport Forum, (4); 106–107.
6.
Fruin, J. J., and Benz, G. (1984). “Pedestrian time‐space concept for analyzing corners and crosswalks.” Transp. Res. Record 959, Transportation Research Board, Washington, D. C, 18–24.
7.
Gentry, D., and Doyle, K. M. (1978). “The FAA's airport landside model: Analytical approach to delay analysis.” Report FAA‐AVP‐78‐2, Federal Aviation Administration, U.S. Department of Transportation, Washington, D.C.
8.
Gorstein, M., and McCabe, L. (1982). “Airport landside model (ALSIM)—Volume 1, planning guide.” Report FAA‐EM‐80‐8‐I, Transportation Systems Center, U.S.—Department of Transportation, Cambridge, Mass.
9.
Gosling, G. D. (1988). “Introduction.” Transp. Res. Record 959, Transportation Research Board, Washington, D.C., 1–3.
10.
Jovanocic, T., Jelaska, M., and Janic, M. (1984). “Aircraft delay impact on a central terminal hall: A simulation model.” Airport Forum, (3); 63–67.
11.
Lemmer, A. C. (1988). “Measuring airport landside capacity.” Transp. Res. Record 1199, Transportation Research Board, Washington, D.C., 12–18.
12.
Low, J. T. (1977). “Analysis of passenger congestion delays at a metropolitan airport: A system simulation approach,” PhD thesis, University of Michigan, at Ann Arbor, Mich.
13.
McCullough, B. F., and Roberts, F. L. (1979). “Decision tool for analysis of capacity of airport terminal buildings.” Transp. Res. Record 732, Transportation Research Board, Washington, D.C., 41–53.
14.
Mumayiz, S. (1985). “A methodology for planning and operations management of airport passenger terminals: A capacity/level‐of‐service approach,” PhD thesis, University of Technology, at Loughborough, England.
15.
Mumayiz, S. (1990). “An overview of airport simulation models.” Transp. Res. Record 1273, Transportation Research Board, Washington, D.C., 11–20.
16.
Mumayiz, S., and Ashford, N. (1986). “Methodology for planning and operations management of airport terminal facilities.” Transp. Res. Record 1094, Transportation Research Board, Washington, D.C., 24–35.
17.
Odoni, A. R., and de Neufville, R. (1991). “Passenger terminal design and computer models,” presented at the 70th annual meeting, Transportation Research Board, Washington, D.C.
18.
Park, C.‐H. (1977). “A tandem‐queue algorithm for evaluating overall airport capacity,” PhD thesis, University of Texas at Austin, Tex.
19.
Ramsey, G. S., and Hutchinson, B. G. (1982). A general description of the airport terminal passenger flow model. Transport Group, Department of Civil Engineering, University of Waterloo, Waterloo, Ontario.
20.
Setti, J. R. A. (1990). “Passenger terminal simulation model,” PhD thesis, University of Waterloo, at Waterloo, Ontario.
21.
Transport Canada. (1980). “Summary of the airport planning simulation package.” Technical Report AK‐41‐01‐100, Quantitative Systems Division, Canadian Air Transportation Administration, Canada, Ottawa, Ontario.
22.
Transportation Research Board. (1987). “Measuring airport landside capacity.” Special Report 215, Transportation Research Board, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Jan 31, 1992
Published online: Jul 1, 1994
Published in print: Jul 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.