Tire‐Wear Characteristics of Public Buses
Publication: Journal of Transportation Engineering
Volume 117, Issue 3
Abstract
This paper describes a study that examines tire‐wear characteristics of a fleet of public buses under actual operating conditions. A sampling experiment is first performed to determine the number of tread‐depth measurements required for each tire. A sample size of 12 is found to be adequate. Tread wear of 144 tires is measured and analyzed statistically. Emphasis is placed on identifying bus operating parameters that are within bus operators' control, to achieve optimal tire use. Two sets of regression models are developed to describe tire‐wear characteristics of the bus fleet. The first set of models is expressed in terms of indicator variables representing service routes and bus models, while the second set consists of quantitative parameters representative of tire, vehicle, and service characteristics of the buses. The effects of individual parameters are established statistically. The results show that tire and service parameters have a great influence on tire‐wear characteristics of the buses.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chesher, A., and Harrison, R. (1987). Vehicle operating costs. The Johns Hopkins University Press, Baltimore, Md.
2.
Claffey, P. J. (1971). “Running costs of motor vehicles as affected by road design and traffic.” NCHRP Report 111, Highway Res. Board.
3.
Draper, N. R., and Smith, H. (1966). Applied regression analysis. John Wiley and Sons, Inc., New York, N.Y.
4.
Fwa, T. F., and Yap, C. M. (1988). “Highway pavement performance evaluation for maintenance management of road networks.” J. Instn. of Engrs., Singapore, 28(1), 49–58.
5.
Hide, H., Abaynayaka, S. W., Sayer, I., and Wyatt, R. J. (1975). “The Kenya road transport cost study: Research on vehicle operating costs.” Transport and Road Res. Lab. Report 672, Department of the Environment, Crowthorne, United Kingdom.
6.
Lim, L. S. (1989). “Analysis of tyre wear characteristics of buses.” Final Year Project Report, Dept. of Mech. and Production Engrg., Nat. Univ. of Singapore, Singapore.
7.
Neter, J., Wasserman, W., and Kuther, M. H. (1985). Applied linear statistical models, Second Ed., Richard D. Irwin, Inc., Ill.
8.
Ryder, D. F. (1979). “Design of radial passenger tires with aramid cord belts.” ASTM STP 694, R. A. Fleming and D. I. Livingston, eds., Amer. Society for Testing and Materials, Philadelphia, Pa., 284–297.
9.
SAS user's guide 1985. (1985). SAS Institute, Cary, N.C.
10.
Willilams, A. R., and Evans, M. S. (1983). “Influence of tread wear irregularity on wet friction performance of tires.” ASTM STP 793, W. E. Meyer and J. D. Walter, eds., Amer. Society for Testing and Materials, Philadelphia, Pa., 41–64.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: May 1, 1991
Published in print: May 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.