Seismic Response of Elevated Steel Water Pipe
Publication: Journal of Transportation Engineering
Volume 116, Issue 4
Abstract
Elevated steel water pipelines may be subjected to transverse and vertical seismic forces, and should be designed to withstand these forces safely. A specific elevated steel water pipeline is studied using a linear computer program that incorporates the response spectrum approach for seismic analysis. Two means of pipeline support are studied and compared: a steel moment-resisting frame system and a steel vertical truss system. Preliminary design of the individual supports is completed using an approximate lateral-force procedure. The bending moment in the pipeline is then investigated, as well as the lateral forces imparted to the support structures, using the response spectrum approach, with modifications for damping and ductility. Results indicate that the equivalent lateral-force procedure does not prove satisfactory for this particular pipeline. In addition, the vertical truss method of support results in a consistently lower bending moment in the pipeline than does the moment-resisting frame method of support.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anderson, T. L., and Nyman, D. J. (1977). “Lifeline earthquake engineering for trans‐Alaska pipeline system.” The current state of knowledge of lifeline earthquake engineering (ASCE Tech. Council on Lifeline Earthquake Engrg. Specialty Conf), ASCE, 35–50.
2.
“Code for pressure piping.” (1977). ANSI B31.1, Am. Nat. Standards Inst., New York, N.Y.
3.
Hall, W. J., and Newmark, N. M. (1977). “Seismic design criteria for pipelines and facilities.” The current state of knowledge of lifeline earthquake engineering (ASCE Tech. Council on Lifeline Earthquake Engrg. Specialty Conf.), ASCE, 18–33.
4.
Manual of steel construction. (1980). 8th Ed., Am. Inst. of Steel Constr., Chicago, Ill.
5.
“Minimum design loads for buildings and other structures.” (1982). ANSI A58.1, Am. Nat. Standards Inst., New York, N.Y.
6.
Newmark, N. M., and Hall, W. J. (1982). Earthquake spectra and design. Earthquake Engrg. Res. Inst., Berkeley, Calif.
7.
“Tentative provisions for the development of seismic regulations for buildings.” (1978). Publication ATC 3‐06 (NBS Special Publications 510), Applied Technology Council, U.S. Government Printing Office, Washington, D.C.
8.
Ware, A. G., and Thinnes, G. L. (1984). “Structural damping results from vibration tests of straight piping sections.” Seismic effects in PVP components (ASME Pressure Vessel and Piping Conf. and Exhibition), American Society of Mechanical Engineers, 25–41.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jul 1, 1990
Published in print: Jul 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.