Failure of Concrete Pavements in Test Tracks
Publication: Journal of Transportation Engineering
Volume 115, Issue 5
Abstract
Results of full‐scale accelerated traffic tests conducted by the U.S. Army Corps of Engineers were studied. It was found for similar pavements that relationships between observed failure coverages for different loads and gear assemblies provided a better correlation for flexible pavements than for rigid pavements. The analyses suggest that there may be variables in the tests that could adversely affect either the performance in rigid pavements more than in flexible pavements, or only the performance of rigid pavements. It was inferred that inconsistent test track results can be expected in similar rigid pavements due to: (1) The presence of joint system itself and difference in the material and construction variabilities in the joint system; (2) the possible difference in the geometrical layout of the joint system relative to the applied traffic pattern in each test traffic lane; and (3) temperature and moisture differentials in the concrete slabs, which may not be repeatable from one test to another. The analyses may suggest that the reliability of the failure criteria established from field‐test data may be inherently lower for rigid pavements than for flexible pavements.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahlvin, R. G. et al. (1971). “Multiple‐wheel heavy gear load pavement tests.” Tech. Report S‐71‐17, I–IV, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
2.
“BISAR users manual: Layered system under normal and tangential loads.” (1972). Koninklijke/Shell Laboratorium, Amsterdam, Holland.
3.
Brown, D. N., and Thompson, O. O. (1973). “Lateral distribution of aircraft traffic.” Miscellaneous Paper S‐73‐56, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
4.
Chou, Y. T. (1975). “Damage equivalencies of single and multiple loads.” J. Transp. Engrg., ASCE, 101(3).
5.
Chou, Y. T. (1976). “An iterative layered elastic computer program for rational pavement design.” Report No. FAA‐RD‐75‐226, Federal Aviation Administration, Washington, D.C.
6.
Chou, Y. T. (1981). “Structural analysis computer programs for rigid multicomponent structures with discontinuities—WESLIQID and WESLAYER, Report 1: program development and numerical presentations.” Tech. Report GL‐81‐6, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
7.
Deacon, J. A., and Monismith, C. L. (1967). “Laboratory flexural‐fatigue testing of asphalt‐concrete with emphasis on compound‐loading tests.” Research Record 158, Highway Research Board, Washington, D.C., 1–31.
8.
Deacon, J. A. (1969). “Load equivalency in flexible pavements.” Proc., Association of Asphalt Paving Technologists, 38, 465–494.
9.
Deacon, J. A. (1971). “Equivalent passages of aircraft with respect to fatigue distress of flexible airfield pavements.” Proc., Association of Asphalt Paving Technologists, 40, 194–226.
10.
Duncan, J. M., Monismith, C. L., and Wilson, E. L. (1968). “Finite element analysis of pavements.” Highway Research Record 228, Highway Research Board, 11–17.
11.
Hudson, W. R., and Matlock, H. (1966). “Analysis of discontinuities orthotropic pavement slabs subjected to combined loads.” Highway Research Record 131, Highway Research Board, 1–48.
12.
Kasianchuk, D. A. (1968). “Fatigue considerations in the design of asphalt concrete pavements.” Grad. Report, Institute of Transportation and Traffic Engineering, Univ. of California, Berkeley, Calif.
13.
Packard, R. G. (1973). “Design of concrete airport pavement.” Engrg. Bull. 050.03P, Portland Cement Association, Skokie, Ill.
14.
Packard, R. G. (1974). “Fatigue concepts for concrete airport pavement design.” J. Transp. Engrg., ASCE, 100(3), 567–582.
15.
Parker, F. et al. (1979). “Development of a structural design procedure for rigid airport pavements.” Tech. Report TR‐GL‐79‐4, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
16.
Tabatabaie, A. M., and Barenberg, E. J. (1980). “Structural analysis of concrete pavement systems.” J. Transp. Engrg., ASCE, 106(5).
17.
Westergaard, H. M. (1925). “Computation of stresses in concrete roads.” Proc., Highway Research Board, 5(I), 90–112.
18.
Westergaard, H. M. (1926). “Stresses in concrete pavements computed by theoretical analysis.” Public Roads, 7(2), 25–35.
19.
Westergaard, H. M. (1939). “Stresses in concrete runways of airports.” Proc., Highway Research Board, 19, 197–262.
20.
Westergaard, H. M. (1948). “New formulas for stresses in concrete pavements of airfields.” Trans., ASCE, 113, 425–444.
21.
Witczak, M. W. (1973). “Full‐depth pavements for air carrier airports.” MS‐11, 2nd ed., The Asphalt Institute, College Park, Md.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Sep 1, 1989
Published in print: Sep 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.