Proper Determination of Earthworks Overhaul
Publication: Journal of Transportation Engineering
Volume 113, Issue 3
Abstract
There is some lack of uniformity in determining earthworks overhaul distance. Often, it is calculated as the distance between the centers of gravity of the cut and the fill, less the freehaul distance. This paper describes a different approach for calculating the haulage distance, i.e., to use the distance between centers of gravity of the cut and fill as the actual hauling distance to be paid for. It is proposed that the correct procedure should use the entire distance over which the earth volume is moved. Four basic reasons for this suggested approach are presented and discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, C. F. (1931). Railroads curves and earthwork, 7th ed., McGraw‐Hill Book Co., New York, N.Y.
2.
Bruce, A. G., and Clarkson, J. (1952). Highway design and construction, International Textbook Co., Scranton, Pa.
3.
Church, H. K. (1981). Excavation handbook, McGraw‐Hill Book Co., New York, N.Y.
4.
Hickerson, T. F. (1964). Route location and design, 5th ed., McGraw‐Hill Book Co., New York, N.Y.
5.
Ives, H. C., and Kissam, P. (1952). Highway curves, 4th ed., John Wiley and Sons, New York, N.Y.
6.
Oglesby, C. H. (1975). Highway engineering, 3rd ed., John Wiley and Sons, New York, N.Y.
7.
Wright, P. H., and Paquette, R. J. (1979). Highiway engineering, 4th ed., John Wiley and Sons, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Mar 1, 1987
Published in print: Mar 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.