Culvert‐Soil Interaction Finite Element Analysis
Publication: Journal of Transportation Engineering
Volume 112, Issue 3
Abstract
A culvert‐soil structural model developed using general purpose finite element codes is described. Features of culvert specific codes such as incremental construction and Duncan's soil model are incorporated in the model via MARC user coded subroutines. Model evaluation through comparison of numerical results with results of prior empirical and analytical work establishes model validity. Our work demonstrates that finite element analysis performed using general purpose codes models the culvert‐soil interaction as effectively as culvert specific codes. Furthermore, both the interactive graphics and analytical capabilities of general purpose codes extend beyond those of culvert specific codes making general purpose codes applicable to a wider range of problems. This work guides engineers using general purpose codes in evaluating culvert‐soil interaction.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ASTM, “Standard Recommended Practice for Underground Installation of Flexible Thermoplastic Sewer Pipe,” ASTM Part 34: Plastic Pipe and Building Products, No. D2321, 1980, pp. 170–175.
2.
Clough, R. W., and Woodard, R. J., “Analysis of Embankment Stresses and Deformation,” Journal of the Soil Mechanics and Foundation Engineering Division, ASCE, Vol. 93, No. SM4, July, 1967, pp. 529–549.
3.
Desai, C. S., Elementary Finite Element Method, Prentice‐Hall, Inc., Engelwood Cliffs, N.J., 1979.
4.
Duncan, J. M., “Finite Element Analysis of Buried Flexible Metal Culvert Structures,” Laurits Bjerrum Memorial Volume, N. Jambu, F. Jorstad, and B. Kfoernsli, Eds., Norwegian Geotechnical Institute, Oslo, Norway, 1976, pp. 213–222.
5.
Duncan, J. M., “Behavior and Design of Long Span Metal Culverts,” ASCE Journal of the Geotechnical Engineering Division, Vol. 105, Mar., 1979, pp. 399–418.
6.
Duncan, J. M., Byrne, P., Wong, K. S., and Mabry, P., “Strength, Stress‐Strain and Bulk Modulus Parameters for Finite Element Analysis of Stresses and Movements in Soil Masses,” Univ. of California, Department of Civil Engineering, Report No. UCB/GT/80‐01, Aug., 1980.
7.
General Electric, “User Manual for MODEL CREATION, CROSS‐SECTION ANALYSIS, and OUTPUT DISPLAY,” General Electric CAE International, 1982.
8.
General Electric, “User Manual for SUPERB 6.0,” General Electric CAE International, 1983.
9.
General Electric, “User Manual for GEOMOD,” General Electric CAE International, 1983.
10.
General Electric, “I‐DEAS Technical Overview,” General Electric CAE International, 1984.
11.
Katona, M. G. Smith, J. M., Odello, R. J., and Allgood, J. R., “CANDE: A Modern Approach for the Structural Design and Analysis of Buried Culverts,” Civil Engineering Laboratoy, Naval Construction Battalion Center, Oct., 1976.
12.
Krizek, R. J., Parmalee, R. A., Day, J. N., and Enlagger, H. A., “Structural Analysis and Design of Pipe Culverts,” National Cooperative Highway Research Program, Report 116, HRB, 1971.
13.
Leonards, G. A., and Roy, M. B., “Predicting Performance of Pipe Culverts Buried in Soil,” Joint Highway Research Project No. C‐36‐62F, File No. 9‐8‐6, Purdue Univ., 1976.
14.
MARC Analysis Research Corporation, “MARC Purpose Finite Element Program Manual,” Part 1, Volumes A and B, MARC Analysis Research Corporation, 1980.
15.
MARC Analysis Research Corporation, “MARC General Purpose Finite Element Program Manual,” Part 2, Volumes C, D, and E, MARC Analysis Research Corporation, 1980.
16.
McVay, M. C., “Evaluation of Numerical Modeling of Buried Conduits,” thesis presented to the Univ. of Massachusetts, at Amherst, Mass., in 1982, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
17.
Parmalee, R. A., and Corotic, R. B., “Analytical and Experimental Evaluation of the Modulus of Soil Reaction,” Transportation Research Record, No. 518, 1974, pp. 29–38.
18.
Requicha, A. A. G., and Voelcker, H. B., “Solid Modeling: Current Status and Research Directions,” IEEE Computer Graphics and Applications, Vol. 3, No. 8, Oct., 1982, pp. 25–37.
19.
Robinson, R. A., “General Purpose Finite Element Codes Applied to Culvert Analysis,” The Ohio State Univ., 1983.
20.
Smith, I. M., Programming The Finite Element Method with Applications to Geomechanics, John Wiley and Sons Ltd., New York, N.Y., 1982.
21.
Spangler, M. G., “The Structural Design of Flexible Pipe Culverts,” Public Roads, Vol. 18, No. 12, 1938.
22.
Univ. of California, “Organization and Description of Input Data for Soil Structure Interaction Program (SSTIPN),” Univ. of California, Berkeley, Calif., Jan. 1979.
23.
White, H. L., and Layer, J. P., “The Corrugated Metal Conduit as a Compression Ring,” HBR Proceedings, Vol. 39, 1960, pp. 389–397.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: May 1, 1986
Published in print: May 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.