Accuracy Assessment of Interstate Highway Length Using Digital Elevation Model
Publication: Journal of Surveying Engineering
Volume 130, Issue 3
Abstract
Road length is part of the geometry of the roadway network. Its measurement is critical to all road inventory databases. One approach to obtaining it is to drive cars equipped with a distance measurement instrument (DMI) along roads to measure mileages. This method provides accurate measurements, but it is expensive and time consuming. This paper proposes an alternative way to acquire actual road length, which is currently under consideration by the geographic information system (GIS) unit of the North Carolina Department of Transportation. The emphasis of this study was to determine the accuracy of the proposed approach. The proposed approach employs GIS application programs written in ARC macro language to calculate the actual length (surface length) along the sloped surface of highway centerlines based on elevation data and the road network geometry. This was done for all interstate highways in North Carolina. The calculated GIS results were compared with DMI measurements, which is the most accurate approach presently available to NCDOT. Three filters were applied to remove suspect road segments that have significant errors which are irrelevant to the proposed approach. All remaining segments were grouped by slope and length to evaluate the impact of slope and length on the accuracy. Frequency analysis and root mean square error were determined for all groups. It was found that the proposed method is a technically feasible method with reasonable accuracy. The study also revealed that where there are errors, they occur primarily for road segments with relatively high slopes, short lengths, or both. The meaning of this is that GIS and digital elevation model technologies can be combined and used in lieu of DMI measurements, thus reducing resource demands.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adams, M. T., Malaikrisanachalee, S., Blazquez, C., Lueck, S., and Vonderohe, A.(2002). “Enterprise-wide data integration and analysis for oversize/overweight permitting.” J. Comput. Civ. Eng., 16(1), 11–22.
Amrhein, C. G., and Schut, P. (1990). “Data quality standards and geographic information systems,” Proc., National Conf. GIS for the 1990’s, Canadian Institute of Surveying and Mapping, 918–930.
Anderson, J. M., and Mikhail E. M. (1998). “Chapter 13.” Surveying theory and practice, 7th Ed., McGraw-Hill, New York, 742–779.
Beard, M. K., and Buttenfield, B. P. (1999). “Chapter 15.” Geographic information systems—Principles and technical issues—Volume 1—Detecting and evaluating errors by geographical methods, Wiley, New York, 219–233.
Burrough, P. A., and McDonnell, R. A. (1998). “Chapter 9.” Principles of geographic information systems—Errors and quality control, Oxford University Press, New York, 220–240.
DeMers, M. N. (2000). “Chapter 8.” Fundamentals of geographic information systems, 2nd Ed., Wiley, New York, 208–234.
DeMers, M. N. (2000). “Chapter 10.” Fundamentals of geographic information systems, 2nd Ed., Wiley, New York, 256–297.
Donohoo, M. S. (1990). “Cartographic quality control: No longer optional for today’s GIS programs.” Proc., AM/FM Conf., XIII, 78–87.
Federal Geographic Data Committee (FGDC). (1998). “Geospatial positioning accuracy standards.” FGDC-STD-007.3-1998, 〈http://www.fgde.gov/standards/status/sub1_3.html〉 (June 16, 2001).
Fletcher, D. R. (2000). “Geographic information systems for transportation: A look forward.” Transportation in the New Millennium, Transportation Research Board, Washington, D.C.
Heesom, D., and Mahdjoubi, L.(2001). “Effect of grid resolution and terrain characteristics on data from DTM.” J. Comput. Civ. Eng., 15(2), 137–143.
Heuvelink, G. B. M. (1999). “Chapter 14.” Geographic information systems—Principles and technical issues—Vol. I—Propagation of error in spatial modeling with GIS, Wiley, New York, 207–217.
Jia, X.(2000). “IntelliGIS: Tool for representing and reasoning spatial knowledge.” J. Comput. Civ. Eng., 14(1), 51–59.
Karimi, H. A., Khattak, A. J., and Hummer, J. E.(2000). “Evaluation of mobile mapping systems for roadway data collection.” J. Comput. Civ. Eng., 14(3), 168–173.
Miles, S. B., and Ho, C. L.(1999). “Applications and issues of GIS as tool for civil engineering modeling.” J. Comput. Civ. Eng., 13(3), 144–152.
Ngan, S. (1995). “Digital quality control for manual digitizing operations.” Proc., 9th Annual Symp. on Geographic Information Systems, Vancouver, B. C., Canada, 739.
Osborn, K., et al. (2001). “National digital elevation program (NDEP).” Digital elevation model technologies and applications: The DEM users manual, F. D. Maune, ed. American Society for Photogrammetry and Remote Sensing, Bethesda, Md., 83–120.
Rasdorf, W., Cai, H., Tilley, C., Brun, E., Karimi, H., and Robson, F.(2003). “Transportation distance measurement data quality.” J. Comput. Civ. Eng., 17(2), 75–87.
Treash, K., and Amaratunga, K.(2000). “Automatic road detection in grayscale aerial images.” J. Comput. Civ. Eng., 14(1), 60–69.
USGS National Elevation Dataset. (2000). “USGS mapping applications center.” 〈http://mac.usgs.gov/mac/isb/pubs/factsheets/fs14899.html〉 (October 15, 2003).
USGS National Elevation Dataset. (2001a). 〈http://gisdata.usgs.net/ned/〉 (May 26, 2003).
USGS Western Geographic Science Center. (2001b). “Digital elevation model.” 〈http://craterlake.wr.usgs.gov/dem.shtml〉 (June 2, 2003).
USGS Digital Elevation Data Model. (2003). 〈http://edcwww.cr.usgs.gov/glis/hyper/guide/usgs_dem〉 (March 15, 2003).
Vonderohe, A. P., Travis, L., Smith, R. L., and Tsai, V. (1993). “Adaption of geographic information systems for transportation.” NCHRP Technical Rep. 359, Transportation Research Board, Washington, D.C.
Vonderohe, A. P., Travis, L., Smith, R. L., and Tsai, V. (1994). “Adapting geographic information systems for transportation.” Transportation Research News No. 171, Transportation Research Board, Washington, D.C.
Wu, J., Amaratunga, K., and Chitradon, R. (2002). “Design of distributed interactive online geographic information system viewer using wavelets.” J. Comput. Civ. Eng., 16(2), 115–123.
Xu, Z. X., Ito, K., Schultz, G. A., and Li, J. Y.(2001). “Integrated hydrologic modeling and GIS in water resources management.” J. Comput. Civ. Eng., 15(3), 217–223.
Yanalak, M.(2003). “Effect of gridding method on digital terrain model profile data based on scattered data.” J. Comput. Civ. Eng., 17(1), 58–67.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Nov 22, 2002
Accepted: Jul 9, 2003
Published online: Jul 15, 2004
Published in print: Aug 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.