Geomatics Techniques for Structural Surveying
Publication: Journal of Surveying Engineering
Volume 130, Issue 2
Abstract
Structural engineers may utilize geomatics techniques for precise and accurate measurements of discrete points, detailed façade recording, and the production of engineering drawings and plans. Techniques commonly used include direct measurement using a tape or gauge or, more recently, observations made from a reflectorless total station. Photogrammetric methods are also suitable for structural surveying. Terrestrial laser scanners have recently taken large steps in development and have the potential to become a useful survey tool. An overview of current recording techniques along with an introduction to laser scanning is given, followed by details of a test involving terrestrial survey, photogrammetry, and laser scanning at a site in the United Kingdom. Analysis of the results showed that measurement to targeted points using the laser scanner was comparable to measurement using traditional stereo photogrammetric methods, although care needs to be taken to reduce the impact of mixed pixels and multipath occurring within the scanned scene.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bannister, A., Raymond, S., and Baker, R. (1998). Surveying, Addison-Wesley, New York.
Besl, P., and McKay, N. D.(1992). “A method for the registration of 3D shapes.” IEEE Trans. Pattern Anal. Mach. Intell., 14(2), 239–256.
Beyer, H. (1992). “Advances in characterization and calibration of digital imaging systems.” International Archives of Photogrammetry and Remote Sensing: Proc., 17th ISPRS Congress, Elsevier, Amsterdam, 545–555.
Boehler, W., Heinz, G., and Marbs, A. (2001). “The potential of non-contact close range laser scanners for cultural heritage recording.” Proc., CIPA Symposium, Potsdam, Germany, in press.
Bryan, P. G., Corner, I., and Stevens, D.(1999). “Digital rectification techniques for architectural and archaeological presentation.” Photogramm. Rec., 16(93), 399–415.
Clarke, T. A., Cooper, M. A. R., and Fryer, J. G. (1993). “An estimator for the random error in sub pixel target location and its use in the bundle adjustment.” Proc., Optical 3D Measurement Techniques II, A. Gruen and H. Kahmen, eds., 161–168.
Dallas, R. W. A., Kerr, J. B., Lunnon, S., and Bryan, P. G.(1995). “Windsor Castle: photogrammetric and archaeological recording after the fire.” Photogramm. Rec., 15(86), 225–240.
Drap, P., and Grussenmeyer, P.(2000). “A digital workstation on the web.” ISPRS J. Photogram. Remote Sensing, 55, 48–58.
Fraser, C. S. (1996). “Chapter 9: Network design.” Close range photogrammetry and machine vision, K. Atkinson, ed., Whittles, Caithness, U.K., 256–279.
Fraser, C. S., and Shortis, M. R.(1995). “Metric exploitation of still video imagery.” Photogramm. Rec., 15(85), 107–122.
Fryer, J. G.(1992). “Recent developments in camera calibration.” Int. Arch. Photogram. Remote Sensing, 29(5), 594–599.
Gordon, S., Lichti, D., and Stewart, M. (2001). “Application of a high-resolution, ground-based laser scanner for deformation measurements.” Proc., 10th FIG Int. Symp. on Deformation Measurements, Orange, Calif., 23–32.
Hancock, J., et al. (1998). “Active laser radar for high performance measurements.” Proc., IEEE Int. Conf. on Robotics and Automation, Institute of Electrical and Electronics Engineers, New York, 1465–1470.
Hecht, E. (1998). Optics, 3rd Ed., Addison-Wesley, New York.
Heinz, I., Mettenleitter, M., Hartl, T., Froehlich, C., and Langer, D. (2001). “3D ladar for inspection of real world environments.” Proc., Optical 3D Measurement Techniques V, A. Gruen and H. Kahmen, eds., 10–17.
International Electrotechnical Commission (IEC). (2001). “Radiation safety of laser products, equipment classification, requirements and user’s guide.” Rep. 60825-1(2001-08) Ed 1.2, 2001, Geneva.
Leica Geosystems AG. (1998). Leica TPS1100—user’s manual 1.0.0en, Heerbrug, Switzerland.
Lichti, D. D., Stewart, M. P., Tsakiri, M., and Snow, A. J. (2000). “Calibration and testing of a terrestrial laser scanner.” Int. Arch. Photogram. Remote Sensing, 33(B5), 485–492.
Mills, J. P., Peirson, G. C., Newton, I., and Byran, P. G.(2000). “Photogrammetric investigation into the suitability of desktop image measurement software for architectural recording.” Int. Arch. Photogram. Remote Sensing, 33(B5), 525–532.
Niebuhr, E. (2001). “From the point to the surface—the Callidus technology in theory and practice.” Proc., Optical 3D Measurement Techniques V, A. Gruen and H. Kahmen, eds., 26–32.
O’Shea, D. C., Callen, W. R., and Rhodes, W. T. (1997). Introduction to lasers and their applications, Addison-Wesley, New York.
Pfeifer, N., and Rottensteiner, G. (2001). “The Riegl laser scanner for the survey of the interior of Schoenbrunn Palace.” Proc., Optical 3D Measurement Techniques V, A. Gruen and H. Kahmen, eds., 18–25.
Pulli, K. (1999). “Multiview registration for large data sets.” Proc., 2nd Int. Conf. on 3D Digital Imaging and Modeling (3DIM’99), Ottawa, 160–168.
Riegl. (2001). “Product specification for the Riegl LMS Z210 laser scanner.” 〈http://www.riegl.com/lms-z210/e_lms-z210.htm#data〉 (Jan. 30, 2002).
Robson, S., and Shortis, M. R.(1998). “Practical influences of geometric and radiometric image quality.” Photogramm. Rec., 16(92), 225–249.
Runne, H., Niemeier, W., and Kern, F. (2001). “Application of laser scanners to determine the geometry of buildings.” Proc., Optical 3D Measurement Techniques V, A. Gruen and H. Kahmen, eds., 41–48.
Shortis, M. R., Robson, S., and Beyer, H. A.(1998). “Principal point behavior and calibration parameter models for Kodak DCS cameras.” Photogramm. Rec., 16(92), 165–186.
Ullrich, A., Reichert, R., Schwarz, R., and Riegl, J. (2001). “Time-of-flight based 3D imaging sensor with true color channel for automated texturing.” Proc., Optical 3D Measurement Techniques V, A. Gruen and H. Kahmen, eds., 2–9.
Wehr, A., and Lohr, U.(1999). “Airborne laser scanning—an introduction and overview.” ISPRS J. Photogram. Remote Sensing, 54, 68–82.
Wolf, P., and Dewit, B. (2000). Elements of photogrammetry, McGraw-Hill, New York.
Wolf, P. R., and Ghilani, C. D. (1997). Adjustment computations, Wiley, New York.
Wunderlich, T. A. (2001). “Operational and economic prospects of terrestrial laser scanning.” Proc., Optical 3D Measurement Techniques V, A. Gruen and H. Kahmen, eds., 18–25.
Zeiss. (1987). Zeiss P3 Planicomp P-Series analytical workstation specifications: Rev. 10/87, Thornwood, N.Y.
Zoller and Fröhlich. (2002). “Z+F: wire harness, automation, laser measurement technology.” 〈http://www.zofre.de/ehome.htm〉 (Jan. 30, 2002).
Information & Authors
Information
Published In
Journal of Surveying Engineering
Volume 130 • Issue 2 • May 2004
Pages: 56 - 64
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Mar 25, 2002
Accepted: Aug 30, 2002
Published online: Apr 15, 2004
Published in print: May 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.