Use of GPS‐Derived Coordinates in GIS Environment
Publication: Journal of Surveying Engineering
Volume 114, Issue 4
Abstract
GIS (Geographic Information Systems) will become increasingly important for engineers and planners because of their inherent ability to provide both positional and attribute information about the land. In the past, the expense involved in tying land‐related information to a common, accurate geographic base was largely prohibitive. With the advent of the GPS (global positioning system), a new avenue has been opened to surveyors and others to measure relative geographic positions quickly and accurately. A high‐accuracy GPS reference network provides the means of resolving differences in horizontal datums, which is the most serious obstacle to relating data from disparate sources within a GIS. Initiatives are being taken in New Mexico to establish such a network as a public resource. The New Mexico State Highway and Transportation Department will use the network as the basis for developing a statewide parcel‐level highway data base. This will be part of a statewide effort to promote the improvement and sharing of geographic information.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Frank, A. (1984). Classnotes from computer cartography I. Surveying Engineering Program, University of Maine, Orono, Me.
2.
GPS resource package. (1987). GPS Committee, New Mexico Geographic Information Council, Albuquerque, N.M.
3.
Lambert, S. (1987). “Monitoring vertical crustal deformation in eastern Maine using GPS and derived orthometric heights,” thesis presented to the University of Maine, at Orono, Me., in partial fulfillment of the requirements for the degree of Master of Science.
4.
Leick, A., ed. (1980). “Land information at the local level.” Proc., University of Maine.
5.
Leick, A. (1987). GIS point referencing by satellite and gravity. Surveying Engineering Program, University of Maine, Orono, Me.
6.
Need for a multipurpose cadastre. (1980). National Academy Press, Washington, D.C.
7.
Procedures and standards for a multipurpose cadastre. (1983). National Academy Press, Washington, D.C., 23–43.
8.
Quirion, C. A. (1987). “The global positioning system in kinematic mode: Formulation, analysis, and use,” thesis presented to the University of Maine at Orono, Me., in partial fulfillment of the requirements for the degree of Master of Science.
9.
Remondi, B. W. (1984). “Use of the global positioning system (GPS) phase observable for relative geodesy: Modeling, processing, and results,” thesis presented to the University of Texas at Austin, Tex., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Nov 1, 1988
Published in print: Nov 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.