Uniaxial Shear-Flexure Model for Reinforced Concrete Elements
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 134, Issue 9
Abstract
A simple approach was developed for performance-based analysis of reinforced concrete columns subjected to shear, flexure and axial loads. This method is based on a simplification of a consistent but relatively more complex approach known as the axial-shear-flexure interaction (ASFI) method, which is able to predict the full load-deformation relationships of reinforced concrete columns subjected to axial, flexure and shear force. The uniaxial shear-flexure model (USFM), presented herein, can also predict comparable full load-deformation responses. In it, however, the computation-intensive iteration process for shear modeling used within the ASFI approach is eliminated and the formulation is simplified. This paper describes the formulation, implementation and verification of the USFM approach.
Get full access to this article
View all available purchase options and get full access to this article.
References
Koizumi, H. (2000). “A study on a new method of sheet strengthening to prevent axial collapse of RC columns during earthquakes.” MS thesis, Faculty of Engineering, Architrave Dept., Univ. of Tokyo, Tokyo (in Japanese).
Lynn, A. C., Moehle, J. P., Mahin, S. A., and Holmes, W. T. (1996). “Seismic evaluation of existing reinforced concrete building columns.” Earthquake Spectra, 12(4), 715–739.
Mostafaei, H. (2006). “Axial-shear-flexure interaction approach for displacement-based evaluation of reinforced concrete elements.” Ph.D. thesis, Faculty of Engineering, Architrave Dept., Univ. of Tokyo, Tokyo.
Mostafaei, H., and Kabeyasawa, T. (2005). “A simple approach for displacement-based assessment of RC columns.” Proc. 1st NEES/E-Defense Workshop on Collapse Simulation of Reinforced Concrete Building Structure, Univ. of California Berkeley, Earthquake Engineering Reseach Center, PEER 2005/10, 47–63.
Mostafaei, H., and Kabeyasawa, T. (2007). “Axial-shear-flexure interaction approach for reinforced concrete columns.” ACI Struct. J., 104(2), 218–226.
Nagaya, K., and Kawashima, K. (2002). “Effect of aspect ratio and longitudinal reinforcement diameter on seismic performance of reinforced concrete bridge columns.” Rep. No. TIT/EERG 01, Tokyo Institute of Technology, Tokyo.
Nakamura, T., and Yoshimura, M. (2002). “Gravity collapse of reinforced concrete columns with brittle failure modes.” J. Asian Architecture and Building Engineering, 1(1), 21–27.
Okamura, H., Maekawa, K. (1991). “Nonlinear analysis and constitutive models of reinforced concrete.” Gihodo Shuppan Co., Ltd., Tokyo.
Ousalem, H., Kabeyasawa, T., Tasai, A., and Iwamoto, J. (2003). “Effect of hysteretic reversals on lateral and axial capacities of reinforced concrete columns.” Proc., Japan Concrete Institute, 25(2), 367–372.
Saatcioglu, M., and Ozcebe, G. (1989). “Response of reinforced concrete columns to simulated seismic loading.” ACI Struct. J., 86(1), 3–12.
Sezen, H. (2000). “Evaluation and testing of existing reinforced concrete columns.” CE 299 Rep., Dept. of Civil and Environmental Engineering, UC Berkeley, Berkeley, Calif.
Umemura, H., Aoyama, H., and Noguchi, H. (1977). “Experimental studies on reinforced concrete members and composite steel and reinforced concrete members.” Faculty of Engineering, Dept. of Architecture, Univ. of Tokyo, Vol. 2, 113–130.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” ACI J., 83(2), 219–231.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jun 5, 2007
Accepted: Feb 1, 2008
Published online: Sep 1, 2008
Published in print: Sep 2008
Notes
Note. Associate Editor: Dat Duthinh
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.