Unintended Consequences of Modeling Damping in Structures
Publication: Journal of Structural Engineering
Volume 134, Issue 4
Abstract
This paper investigates the consequence of using Rayleigh proportional damping in the analysis of inelastic structural systems. The discussion is presented theoretically, as well as by example through the analysis of a simple five-story structure. It is shown that when the stiffness portion of the system damping matrix is based on the original system stiffness, artificial damping is generated when the structure yields. When the damping matrix is based on the tangent stiffness but the Rayleigh proportionality constants are based on the initial stiffness, a significant but reduced amplification of damping occurs. When the damping is based on the tangent stiffness and on updated frequencies based on this stiffness, virtually no artificial damping occurs. The paper also investigates the influence on effective damping when localized yielding occurs in areas of concentrated inelasticity. In such cases, it is possible to develop artificial viscous damping forces that are extremely high, but that are not easy to detect. Such artificial damping forces may lead to completely invalid analysis. The paper ends with recommendations for performing analysis where the artificial damping is eliminated, or at least controlled.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ashikari, S., and Woodhouse, J. (2000). “Towards identification of a general model of damping.” Proc., 18th Int. Modal Analysis Conf., San Antonio, Tex.
Bernal, D. (1994). “Viscous damping in inelastic structural response.” J. Struct. Eng., 120(4), 1240–1254.
Bouc, R. (1967). “Forced vibration of mechanic systems with hysteresis.” Proc., 4th Conf. on Nonlinear Oscillations, Prague.
Carr, A. J. (2004). Ruaumoko manual, Vol. 1: Theory and user's guide to associated programs, Univ. of Canterbury, Christchurch, New Zealand.
Caughey, T. K. (1960). “Classical normal modes in damped linear systems.” J. Appl. Mech., 27, 269–271.
Chrisp, D. J. (1980). “Damping models for inelastic structures.” MS thesis, Univ. of Canterbury, Christchurch, New Zealand.
Clough, R., and Penzien, J. (2003). Dynamics of structures, Computer and Structures, Inc., Berkeley, Calif.
Fritz, W. P., Jones, N., and Igusa, T. (2006). “Predictive models for the median and variability of building period and damping.” J. Struct. Eng., to be submitted.
Golafshani, A. A. (1982). “DRAIN 2D-2 a program for inelastic seismic response of structures.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of California, Berkeley, Calif.
Kanaan, A. E., and Powell, G. H. (1973). “DRAIN-2D a general purpose computer program for dynamic analysis on inelastic plane structures.” EERC Rep. Nos. 73-6 and 73-22, Univ. of California, Berkeley, Calif.
Kareem, A., and Gurley, K. (1996). “Damping in structures: Its valuation and treatment of uncertainty.” J. Wind. Eng. Ind. Aerodyn., 59, 131–157.
Lazan, B. J. (1968). Damping of materials and members in structural mechanics, Pergamon, Oxford, U.K.
Leger, P., and Dussault, S. (1992). “Seismic-energy dissipation in MDOF structures.” J. Struct. Eng., 118(5), 1251–1269.
Liang, Z., and Lee, G. C. (1991). “Damping of structures. Part 1—Theory of complex damping.” NCEER Rep. No. 91-0004, State Univ. of New York at Buffalo, Buffalo, N.Y.
Mondkar, D. P., and Powell, G. H. (1975). “ANSR-I: General purpose program for analysis of nonlinear structural response.” Rep. No. EERC 75-37, Univ. of California, Berkeley, Calif.
Mondkar, D. P., and Powell, G. H. (1979). “ANSR-II: General purpose program for analysis of nonlinear structural response.” Rep. No. EERC 79-17, Univ. of California, Berkeley, Calif.
Nashif, A. D., Jones, D. I. G., and Henderson, J. P. (1985). Vibration damping, John Wiley Interscience Publications, New York.
Oughourlian, C. V., and Powell, G. H. (1982). “ANSR III: General purpose program for analysis of nonlinear structural response.” Rep. No. EERC 82-21, Univ. of California, Berkeley, Calif.
Prakash, C., Powell, G., and Campbell, S. (1993). Drain-2DX program description and user guide, Dept. of Civil Engineering, Univ. of California, Berkeley, Calif.
Shing, P. B., and Mahin, S. A. (1987). “Elimination of spurious higher-mode response in pseudodynamic tests.” Earthquake Eng. Struct. Dyn., 15, 425–445.
Ting, J. M., and Crawley, E. F. (1992). “Characterization of damping of materials and structures from nanostrain levels to one thousand microstrain.” AIAA J., 30(7), 1856–1863.
Valles, R. E., Reinhorn, A. M., Kunnath, S. K., and Madan, A. (1996). “IDARC 2D version 4.0: A program for the inelastic damage analysis of buildings.” Technical Rep. No. NCEER-96-0010, State Univ. of New York at Buffalo, Buffalo, N.Y.
Warburton, G. B., and Soni, S. R. (1977). “Errors in response calculations for non-classically damped structures.” Earthquake Eng. Struct. Dyn., 5, 365–376.
Wilson, E. L. (2002). Three dimensional static and dynamic analysis of structures, Computers and Structures, Inc., Berkleley, Calif.
Wilson, E. L., and Penzien, J. P. (1972). “Evaluation of orthogonal damping matrices.” Int. J. Numer. Methods Eng., 4, 5–10.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jun 19, 2006
Accepted: Jul 26, 2007
Published online: Apr 1, 2008
Published in print: Apr 2008
Notes
Note. Associate Editor: M. Asghar Bhatti
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.