Application of ANN-Based Response Surface Method to Prediction of Ultimate Strength of Stiffened Panels
Publication: Journal of Structural Engineering
Volume 134, Issue 10
Abstract
Stiffened plates are major structural components in ships and offshore structures. Their structural integrity has direct implications on the safety of human beings and goods on ships. Accurate prediction of the ultimate strength of stiffened plates has been a very important task for ship designers. In this study, an artificial neural network-based response surface method (ANN-RSM) is applied to derive a formula to predict the ultimate strength of stiffened plates under uniaxial compression using the existing experimental data. The key issues in optimizing an ANN model are systematically examined. The developed formula is compared with some existing analytical formulas, such as Faulkner’s formulas, Pu’s formulas, and Carlsen’s formula. It is determined that the formula proposed in this study is much more accurate than existing analytical methods based on the current database. The hyperbolic tangent activation function can produce more accurate results than the sigmoid function in this application. The normalization range of input and output variables also has an effect on the performance of the ANN model, which should be considered. ANN-RSM has fairly good extrapolation capacity.
Get full access to this article
View all available purchase options and get full access to this article.
References
Byklum, E., and Amdahl, J. (2002). “A simplified method for elastic large deflection analysis of plates and stiffened panels due to local buckling.” Thin-Walled Struct., 40(11), 925–953.
Byklum, E., Steen, E., and Amdahl, J. (2004). “A semi-analytical model for global buckling and postbuckling analysis of stiffened panels.” Thin-Walled Struct., 42(5), 701–717.
Carlsen, C. A. (1977). “Simplified collapse analysis of stiffened plates.” Norw. Marit. Res., 7(4), 20–36.
Deng, J., Gu, D., Li, X., and Yue, Z. Q. (2005). “Structural reliability analysis for implicit performance functions using artificial neural network.” Struct. Safety, 27(1), 25–48.
Dorman, A. P., and Dwight, J. B. (1973). “Tests on stiffened compression plates and plate panels.” Int. Conf., on Steel Box Girder Bridges, Institution of Civil Engineers, London, 63–75.
Elhewy, A. H., Mesbahi, E., and Pu, Y. (2006). “Reliability analysis of structures using neural network method.” Probab. Eng. Mech., 21(1), 44–53.
Faulkner, D. (1975). “A review of effective steel plating for use in the analysis of stiffened plating.” J. Ship Res., 19(1), 1–17.
Faulkner, D. (1976). “Compression tests on welded eccentrically stiffened plate panels.” Steel plated structures, Institution of Structural Engineers—RINA-CONSTRADO—Imperial College, London, 581–617.
Faulkner, D., Adamchak, J. C., Snyder, J. G., and Vetter, M. F. (1973). “Synthesis of welded grillages to withstand compression and normal loads.” Comput. Struct., 3(2), 221–246.
Fujikubo, M., and Yao, T. (1999). “Elastic local buckling strength of stiffened plate considering plate/stiffener interaction and welding residual stress.” Mar. Struct., 12(9–10), 543–564.
Gomes, H. M., and Awruch, A. M. (2004). “Comparison of response surface and neural network with other methods for structural reliability analysis.” Struct. Safety, 26(1), 49–67.
Guedes Soares, C. (1988). “Design equation for the compressive strength of unstiffened plate elements with initial imperfections.” J. Constr. Steel Res., 9(4), 287–310.
Guedes Soares, C., and Gordo, J. M. (1997). “Design methods for stiffened plates under predominantly uniaxial compression.” Mar. Struct., 10(6), 465–497.
Guedes Soares, C., and Soreide, T. H. (1983). “Behaviour and design of stiffened plates under predominantly compressive loads.” Int. Shipbuild. Prog., 30(341), 13–27.
Harada, M., Fujikubo, M., and Yanagihara, D. (2004). “Estimation of ultimate strength of continuous stiffened plate under combined biaxial thrust and lateral pressure.” J. Soc. Nav. Archit. Jpn., 196, 189–198.
Horne, M. R., Montague, P., and Narayanan, R. (1977). “Influence on strength of compression panels of stiffener section, spacing and welded connection.” Proc. Inst. Civ. Eng., Part 2. Res. Theory, 63(2), 1–20.
Horne, M. R., and Narayanan, R. (1976). “Ultimate capacity of longitudinally stiffened plates used in box girders.” Proc. Inst. of Civ. Eng. (UK), 61(pt 2), 253–280.
Hughes, O. F., Ghosh, B., and Chen, Y. (2004). “Improved prediction of simultaneous local and overall buckling of stiffened panels.” Thin-Walled Struct., 42(6), 827–856.
Hurtado, J. E., and Alvarez, D. A. (2001). “Neural-network-based reliability analysis: A comparative study.” Comput. Methods Appl. Mech. Eng., 191(1–2), 113–132.
International Ships and Offshore Structures Congress (ISSC). (2000). “Ultimate strength.” ISSC ‘2000, Elsevier, Nagasaki, Japan, 253–321.
Mesbahi, E. (2000a). “Application of artificial neural networks in modeling and control of diesel engines.” Ph.D., Univ. of Newcastle Upon Tyne, Newcastle Upon Tyne, U.K.
Mesbahi, E. (2000b). “A quantitative approach to the definition of just noticeable difference (JND) for artificial neural networks.” IEEE Int. Conf. on Electro-Information Technology, IEEE, New York.
Murotsu, Y., Shao, S., Chiku, N., Fujita, K., and Shinohara, Y. (1993). “Studies on assessment of structural reliability by response surface method and neural network.” IFIP Trans. B: Comp. App. Technol. (B-12), Elsevier, Amsterdam, The Netherlands, 173–180.
Papadrakakis, M., Papadopoulos, V., and Lagaros, N. D. (1996). “Structural reliability analysis of elastic-plastic structures using neural networks and Monte Carlo simulation.” Comput. Methods Appl. Mech. Eng., 136(1–2), 145–163.
Principe, J. C., Neil, R. E., and Curt Lefebrre, W. (1999). Neural and adaptive system, Wiley, New York.
Pu, Y. (1995). “Reliability analysis and reliability-based optimization design of SWATH ships.” Ph.D. thesis, Univ. of Glasgow, Glasgow, Scotland.
Pu, Y., Das, P. K., and Faulkner, D. (1997). “Ultimate compression strength and probabilistic analysis of stiffened plates.” Journal of Offshore Mechanics and Arctic Engineering, Transactions of the ASME, 119(4), 270–274.
Pu, Y., and Mesbahi, E. (2006). “Application of artificial neural networks to evaluation of ultimate strength of steel panels.” Eng. Struct., 28(8), 1190–1196.
Schueremans, L., and Van Gemert, D. (2005). “Benefit of splines and neural networks in simulation based structural reliability analysis.” Struct. Safety, 27(3), 246–261.
Shao, S., and Murotsu, Y. (1997). “Structural reliability analysis using a neural network.” JSME Int. J., Ser. A, 40(3), 242–246.
Smith, C. S. (1975). “Compressive strength of welded steel ship grillages.” Trans. RINA117, 325–359.
Steen, E., Byklum, E., Vilming, K. G., and Ostvold, T. K. (2004). “Computerized buckling models for ultimate strength assessment of stiffened ship hull panels.” 9th Int. Symp. on Practical Design of Ships and other Floating Structures, Seehafen, Luebeck-Travemuende, Germany, 235–242.
Wei, D., and Zhang, S. (1999). “Ultimate compressive strength prediction of stiffened panels by counterpropagation neural networks (CPN).” 9th Int. Offshore and Polar Engineering Conf., ISOPE, Brest, France, 280–285.
Yanagihara, D., Fujikubo, M., and Harada, M. (2003). “Estimation of ultimate strength of continuous stiffened plate under combined thrust and lateral pressure.” J. Soc. Nav. Archit. Jpn., 194, 161–170.
Zhang, T., Liu, T. G., Zhao, Y., and Wang, X. Z. (2003). “Buckling and postbuckling of imperfect stiffened plates.” Journal of Ship Mechanics, 7(1), 79–83.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Feb 6, 2006
Accepted: Sep 6, 2007
Published online: Oct 1, 2008
Published in print: Oct 2008
Notes
Note. Associate Editor: Enrico Spacone
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.