Simplified Hysteretic Finite-Element Model for Wood and Viscoelastic Polymer Connections for the Dynamic Analysis of Shear Walls
Publication: Journal of Structural Engineering
Volume 134, Issue 1
Abstract
This paper presents a simplified methodology of modeling the complex hysteretic behaviors of wood sheathing connections using basic elements found in commercially available finite-element analysis software. By combining these basic elements, customized connection elements that often require extensive programming can be eliminated. This both simplifies the modeling process and adds versatility to the model, such that it can be modified for different types of sheathing connections. A typical nailed sheathing connection has successfully been modeled and implemented into a shear wall model using this methodology. In addition, an innovative viscoelastic (VE) sheathing connection has been modeled using the same strategy and was used in a VE shear wall model. Though this study was focused on wood frame shear walls and their connections, the proposed modeling technique may be applied to virtually all structural components with hysteretic behaviors.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded by a grant from the National Science Foundation (Grant No. NSFCMS-0229724). The writers would like to thank David W. Foley, a graduate of Villanova University, as well as Adrienne Johnston, Dr. Harry Shenton III and Gary Wenczel of the University of Delaware for their efforts and expertise in conducting the experiments.
References
American Wood Council. (2001). Manual for engineered wood construction, American Forest and Paper Association, Washington, D.C.
Cobeen, K. E. (1999). “Wood analysis needs for engineered and prescriptive design.” Proc., Invitational Workshop on Seismic Testing, Analysis and Design of Woodframe Construction, F. Seible, A. Filiatrault, and C. Uang, eds.
Dinehart, D. W., and Shenton, H. W., III. (1998). “Comparison of static and dynamic response of timber shear walls.” J. Struct. Eng., 124(6), 686–695.
Dinehart, D. W., and Shenton, H. W., III. (2000). “Model for dynamic analysis of wood frame shear walls.” J. Eng. Mech., 126(9), 899–908.
Dolan, J. D., and Foschi, R. O. (1991). “Structural analysis model for static loads on timber shear walls.” J. Struct. Eng., 117(3), 851–861.
Filiatrault, A. (1990). “Static and dynamic analysis of timber shear walls.” Can. J. Civ. Eng., 17, 643–651.
Filiatrault, A., Isoda, H., and Folz, B. (2003). “Hysteretic damping of wood framed buildings.” Eng. Struct., 25, 461–471.
Foley, D. (2005). “An experimental investigation of viscoelastic material in wood connections and shearwalls.” MS thesis, Villanova Univ., Villanova, Pa.
Foliente, G. C. (1995). “Hysteresis modeling of wood joints and structural systems.” J. Struct. Eng., 121(6), 1013–1022.
Folz, B., and Filiatrault, A. (2001). “Cyclic analysis of wood shear walls.” J. Struct. Eng., 127(4), 433–441.
Fonseca, F. S., Rose, S. K., and Campbell, S. H. (2002). “Nail, wood screw, and staple fastener connections.” CUREE Publication No. W-16, Richmond, Calif.
Gupta, A. K., and Kuo, P.-H. (1985). “Behavior of wood-framed shear walls.” J. Struct. Eng., 111(8), 1722–1733.
Kalkert, R. E., and Dolan, J. D. (1997). “Behavior of 8-D nailed stud-to-sheathing connections.” For. Prod. J., 47(6), 95–102.
Krawinkler, H., Parisi, F., Ibarra, L., Ayoub, A., and Medina, R. (2001). “Development of a testing protocol for woodframe structures.” CUREE Publication No. W-02, Richmond, Calif.
McCutcheon, W. J. (1985). “Racking deformations in wood shear walls.” J. Struct. Eng., 111(2), 257–269.
Medearis, K. (1970). “Structural dynamics of plywood shear walls.” Wood Sci., 3(2), 106–110.
Pang, W. C., Rosowsky, D. V., Pei, S., and van de Lindt, J. W. (2007). “Evolutionary parameter hysteretic model for wood shear walls.” J. Struct. Eng., 133(8), 1118–1129.
Pardoen, G., Waltman, A., Kazanjy, R., Freund, E., and Hamilton, H. (2003). “Testing and analysis of one-story and two-story shear walls under cyclic loading.” CUREE Publication No. W-25, Richmond, Calif.
Stewart, W. G. (1987). “The seismic design of plywood sheathed shear walls.” Ph.D. thesis, Univ. of Canterbury, New Zealand.
Symans, M., Cofer, W., Du, Y., and Fridley, K. (2004). “Seismic behavior of wood-framed structures with viscous fluid dampers.” Earthquake Spectra, 20(2), 451–482.
Tarabia, A. M., and Itani, R. Y. (1997). “Static and dynamic modeling of light-frame wood buildings.” Comput. Struct., 63(2), 319–334.
Tuomi, R. L., and McCutcheon, W. J. (1978). “Racking strength of light-frame nailed walls.” J. Struct. Div., 104(7), 1131–1140.
White, M. W., and Dolan, J. D. (1995). “Nonlinear shear-wall analysis.” J. Struct. Eng., 121(11), 1629–1635.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Dec 9, 2005
Accepted: Aug 7, 2006
Published online: Jan 1, 2008
Published in print: Jan 2008
Notes
Note. Associate Editor: J. Daniel Dolan
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.